A:AnswerPull the cords down to unlock the bottom locks and gently rotate the bottom from the wall about 4" out the legs will fall down and keep the tv spaced from the wall enough to connect the USB inputs which are side mounted Right Side facing the screen.
A:AnswerDepends on which way the wall is slanted. If the top of the TV would protrude further into the room than the bottom, probably not a good idea. The bottom movable latches might well come loose.
A:AnswerYes, this mount should be compatible with your TV. This mount can support your TV's 400x400mm VESA pattern and your TV is under the mount's 150lbs weight limit.
Thanks,
- Haydn @ SANUS
A:AnswerI would actually recommend our BXL1 low-profile model. It's rated to support larger TVs up to 95". The BXL1 can also support more weight up to 180lbs.
Thanks,
- Haydn @ SANUS
A:AnswerYes, this mount should be compatible with your specific TV. This mount can support your TV's 200x200mm VESA pattern and your TV is under the mount's 150lbs weight limit.
Thanks,
- Haydn @ SANUS
A:AnswerYes, this mount should be compatible with your TV. This mount can support your TV's 200x200mm VESA pattern and your TV is under the stand's 150lbs weight limit.
Thanks,
- Haydn @ SANUS
A:AnswerYes, this mount should be compatible with your TV. This mount can support your TV's 200x200mm VESA pattern and your TV is under the mount's 150lbs weight limit.
Thanks,
- Haydn @ SANUS
A:AnswerAn 85" TV is over this mounts recommend size. This mount is rated to support TV's from 32-80". I'd recommend our BXL1-B1 fixed mount it can support TV's up to 95".
Thanks,
- Haydn @ SANUS
A:AnswerYes this mount should be compatible with your TV. This mount can support your TV's 300x200mm VESA pattern and your TV is under the mount's 150lbs weight limit.
Thanks,
- Haydn @ SANUS
A:AnswerYes this mount should be compatible with your TV. This mount can support your TV's 300x200mm VESA pattern and your TV is under the mount's 150lbs weight limit.
Thanks,
- Haydn @ SANUS
A:AnswerIt comes with the needed lag bolts for wood stud install. It also comes the following mounting screws, M6x12mm, M6x35mm, M8x16mm, M8x20mm, M8x 25mm, M8x35mm, M8x45mm, and M8x50mm.
Thanks,
- Haydn @ SANUS
A:AnswerYes, this mount should be compatible with your TV. You should need M8 screws, 1.25 pitch, at 20-22mm in length for this TV.
Thanks,
- Haydn @ SANUS
A:AnswerIts 26" x 4.84". Here is the link to the tech drawing for reference. https://www.sanus.com/assets/products/bll2/documents/BLL2_TD_190312.PDF
Thanks,
- Haydn @ SANUS
A:AnswerI tried it with a Sony with the outlet behind the TV. The plug end was too deep and I had to get the Geek Squad back out with a deeper mount so the plug behind the TV could be used and the wire not hang down. If you want to plug behind the TV this may not work.