A:AnswerIt should work in your condo as long as you have access to the water supply main that enters your unit and you will need to have a power outlet nearby to connect to the meter. You may want to contact stream labs support to be sure before you purchase though.
A:AnswerHi - Thank you for your interest in the StreamLabs Monitor. The best installation location is any location that is closest to your main shut-off valve, before the main line branches. The Monitor can only detect leaks downstream of the installation location, so making sure to install the device before any branches is key. If you have any additional questions, please feel free to reach out to us at [email protected].
A:AnswerHi - Thank you for your interest in the StreamLabs Monitor. For the Monitor to calibrate, the pipe the Monitor is installed on must be fully pressurized (no air). If the Monitor detects air in the pipe, it will lose calibration. If you have any additional questions, please feel free to contact us directly at [email protected].
A:AnswerIt seems to be fairly accurate. I compare it to my meter from time to time. If your internet ever goes down, however, which mine did for a few hours, any water you use during that period will not be recorded.
A:AnswerIt measures water flow through a pipe, whether it comes from a well or other source. It sits on the outside of an existing pipe, so no cleaning is required for it.
A:AnswerHi - Thank you for your interest in the StreamLabs Monitor. Unfortunately, StreamLabs products are not currently compatible with Wink. If you have any additionally questions or concerns, please feel free to contact us at [email protected].
