A:AnswerMine is a 48" Vizio and it does very well on this stand. The floating mount handles it very well. It is made well and very heavy. Check the specifications listed in the Whalen Furniture 3-in1 Console TV stand on Amazon.
A:AnswerScrannel,
This is kind of difficult to answer due to the variations that can be used to set up your TV. If you mount the TV bracket on the highest setting for the riser pole, the center of the TV bracket will by approx 45-1/2" off the floor. (I measured on carpeted floor) I have an LG 55" mounted to mine but the mounting holes are not in the center of my TV. My TV is 28-1/2" tall. I have 10" below the center of the middle of the bracket and 18-1/2" above. I am mounted as high on the TV bracket as I can get. If I wanted to I could lower the TV by about 2-1/2" on the bracket itself. The riser pole has a series of holes that will allow you to adjust the height in 2" increments. I found that for my set-up, the best combination was to raise the TV as high as possible on the TV mount bracket and use the second highest setting on the riser. This combo gave the best access to all of my hook-up points on the back of my TV.
Measure the center point between your vertical mounting holes on the back of your TV. Mark that spot with a sharpie dot. Now measure from the dot to the bottom of your TV. Subtract whatever that number is from 45-1/2" and that will get you in the ballpark for the bottom of your TV.
A:AnswerThe overall height, to the tip of the monitor brackets in the highest setting of the Swivel bracket, is 55.75 inches; the TV stand measures 22 inches in height. Please contact us at 1-866-942-5362 if you need further assistance.
A:AnswerYes, it is compatible. The Roku monitor is 57.3" wide including the stand. It weighs 39.7 lb. with the stand. The stand is about 46" wide. The Whalen 3-in1 Console can support a maximum recommended weight of 135 lb. and its width is 54".
Sí es compatible. El peso del televisor Roku está muy por debajo del peso máximo recomendado de la consola Whalen 3 en 1. La base del televisor es más pequeña que la consola, así que cabe.
A:AnswerHi Hank, if the TV is completely flat on the back, you do not need the spacers. Unfortunately, our TV Mounting Kit only includes the most commonly used bolts; they will not fit every brand/size of TV. If none of them fit, please reach out to the TV manufacturer for further assistance.
A:AnswerHi VizioLover! It will actually depend on the actual height of your TV and the position you are using for the Swiveling bracket. There is usually between 5 to 13 inches of space so you should be good to go!
A:AnswerWe apologize for the delay; if you still need assistance, reach out to Customer service at [email protected] to obtain more information. We hope to hear from you soon!
A:AnswerThis TV console was manufactured and tested to hold up to most 65" Flat Panel TVs, with a maximum weight of 135 lbs; we do not recommend using with larger/heavier TVs than the recommended size & weight.
A:Answer3D Interactive assembly instructions are available for this model in the BILT App (free to download in the App Store or Google Play); refer to the section for Monitor Bracket installation for more information. Or, contact us at 1-866-942-5362 and provide your email to send you the assembly instructions.
A:AnswerYou should be able to it comes with hardware for many different setups by the time you’ completed the assembly you will have a lot of hardware left over.
