A:Answer Hello! For model WRMF3636RZSKU To view and adjust the set points, press and hold Temp for 3 seconds to activate Temperature mode. NOTE: To view temperature in degrees Celsius, press the Light button, under Units, when adjust mode is activated. To return the display setting to Fahrenheit, press the Light button again. When Temperature mode is activated, press Temp to toggle between Fridge and Freezer. The display will show the temperature set point of the selected compartment and temperature adjusting information will appear on the display screen. 2. When Temperature mode is activated, press Temp to select the Refrigerator or Freezer zone. The display will show the temperature set point of the selected compartment. 3. Press Lock to raise the set point, or press Options to lower the set point. 4. When you have finished viewing (and adjusting if desired) the refrigerator set point, press Temp, under Select Zone, to change the display to show the freezer set point. When the zone has been changed, “Freezer” appears on the display screen. 5. Press the Lock button to raise the set point, or press the Options button to lower the set point. Save/Confirm Temperature Settings When you have finished viewing (and adjusting if desired) both the refrigerator and freezer set points, press Measured Fill to save the settings. NOTE: To exit without saving changes, press Ice Type at any time while in adjust mode, or allow about 60 seconds of inactivity and adjust mode will turn off automatically. https://shorturl.at/MNEJ3 Thank you for your inquiry about our Whirlpool appliances.
