1-10 of 10 Answers
The protector when centered properly leaves a gap of about 1 mm from the edge of the SP3s screen. It is not so noticeable after a while.
Sorry, there was a problem. Please try again later.It is about 1/16 of an inch from the sides so if you use a back cover that come around to the screen it will not touch the protector and mess it up.
Sorry, there was a problem. Please try again later.Mine fits perfectly with my Surface Pro 3 and lines up with the camera. It covers the entire screen and looks seamless.
Sorry, there was a problem. Please try again later.Don't worry about it - it fits perfect.
Sorry, there was a problem. Please try again later.Fits perfectly. Can't even tell it's there.
Sorry, there was a problem. Please try again later.Yes it covers the screen. There is a 2mm edge not covered so my case protector fits easily
Sorry, there was a problem. Please try again later.Yes. It covers the screen very well.
Sorry, there was a problem. Please try again later.I actually never looked at the specs of screen size for either the Surface Pro 3 or the Zagg when I bought the Zagg. I will say that yes, in my view from having installed it, this does "cover" the surface with just a smidge of room (somewhere between 1/8" to 1/16" maybe) between the edge of the screen cover to the edge of the Surface Pro 3 (assuming centered top to bottom, left and right). I've had no concern with it's coverage, but I also am not expecting "absolute" edge to edge with any screen cover as any screen cover would probably be prone to peeling up when handling the Surface Pro 3 if it were absolute edge to edge.
Sorry, there was a problem. Please try again later.Yes, the dimensions are correct for this product.
Sorry, there was a problem. Please try again later.It's fits well while allowing room for the edges of a case. The plastic sheets covered more area but would peel at the edges when a case was installed.
Sorry, there was a problem. Please try again later.
