DS18 Audio - PSW 10" Shallow-Mount Subwoofer, 500W RMS Single 4-Ohm
Reviews coming soon
About this product
The PSW10.4S is a 10" car subwoofer from the DS18 PSW series. It handles 500 watts RMS and uses a single voice coil at 4 ohms per coil, which keeps wiring simple with most monoblock amplifiers. Peak power handling is 1000 watts. The water-resistant cone holds up to moisture and spray in open-air installs. The shallow-mount basket fits tight spaces and under-seat enclosures where a standard-depth subwoofer will not clear. Mounting requires a 9.2" cutout diameter and 3.0" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.
500W RMS / 1000W Peak Power Handling
Rated at 500 watts RMS and 1000 watts peak. Behind that rating: 2.5" voice coil on an aluminum former wound with Copper wire and a 58 oz ferrite motor. That is what lets a 10" cone move this much air without losing control.
Single 4-Ohm Voice Coil
The single voice coil design keeps wiring simple and works with most monoblock car amplifiers without impedance calculations.
Shallow-Mount Design for Tight Spaces
The shallow mount basket fits under seats, behind seats and in tight factory locations where a standard depth 10" subwoofer will not clear. Confirm your available mounting depth before ordering.
Fitment and Recommended Enclosure
This 10" subwoofer requires a 9.2" cutout diameter and 3.0" of mounting depth. DS18 recommends a sealed enclosure of 0.5 cu ft. Check these numbers against your enclosure before ordering: enclosure volume and tuning change the low-frequency response as much as the driver does.
84dB Sensitivity
A 84dB sensitivity rating turns amplifier watts into audible output efficiently, so you get more usable bass from the power you already have.
- RMS Power500 wattsPeak Power Handling1000 wattsImpedance4 ohmsSensitivity84 decibelsDual Voice CoilsNoWoofer Size10"
Reviews
This product doesn't have any reviews yet.
Compare similar products

The PSW10.4S is a 10" car subwoofer from the DS18 PSW series. It handles 500 watts RMS and uses a single voice coil at 4 ohms per coil, which keeps wiring simple with most monoblock amplifiers. Peak power handling is 1000 watts. The water-resistant cone holds up to moisture and spray in open-air installs. The shallow-mount basket fits tight spaces and under-seat enclosures where a standard-depth subwoofer will not clear. Mounting requires a 9.2" cutout diameter and 3.0" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.

The new design and enhanced performance of the R2-Series subwoofers offer deeper bass and tighter bass control compared to the previous generation. Updates to the new generation include larger, double-stacked magnets, an integrated Faraday ring, and a Kevlar-treated cone. All of these updates equal unmatched durability and reliable performance, even at high volumes. The R2-W10D4 handles up to 750 watts RMS, so it's ready for your high-powered amp. Its dual oversized 4-ohm voice coils offer wiring flexibility for multiple subwoofer setups. Since it works well in sealed or ported enclosures you'll enjoy your music the way you like to hear it.

Experience pounding bass with this CompRT 10-inch subwoofer. This slim speaker is fewer than 4 inches deep for easier mounting. It features dual 2-ohm voice coils and employs a large-diameter, progressive-roll spider for minimal distortion. Use this CompRT 10-inch subwoofer with a sealed or ported enclosure and 400W of power.

Enhance your car's audio system with this 12-inch Kenwood subwoofer. It produces booming bass at a maximum level of 1000W, and its frequency response range of 36-300Hz lets you hear pulsating low notes. This single voice coil Kenwood subwoofer has ready-push terminals, so you can quickly set up your wiring configuration. Geek Squad Installation Recommended Visit your local Best Buy store for more information.
| Pros for DS18 Audio - PSW 10" Shallow-Mount Subwoofer, 500W RMS Single 4-Ohm | |||
|---|---|---|---|
| There were no pros for this product— | There were no pros for this product— | Sound Quality, Bass, Price, Power, Size | Sound Quality, Price, Bass, Power Handling, Durability |
| Cons for DS18 Audio - PSW 10" Shallow-Mount Subwoofer, 500W RMS Single 4-Ohm | |||
| There were no cons for this product— | There were no cons for this product— | There were no cons for this product— | Voice Coil |
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.










































