DS18 Audio - ZR 4-Channel Class D Car Amplifier, 4 x 150W RMS at 4 Ohm - Black
Reviews coming soon
About this product
The ZR600.4D is a 4-channel car amplifier from the DS18 ZR series, built as a Class D design. It delivers 2 x 400 watts RMS at 4 ohms, 4 x 240 watts RMS at 2 ohms and 4 x 150 watts RMS at 4 ohms. The channels are bridgeable, so you can combine them to drive a subwoofer or a pair of higher-power speakers from the same amplifier. Total harmonic distortion is rated at 1.00% with a signal-to-noise ratio of greater than 90dB. A selectable FULL/LPF/HPF crossover covers 40Hz-4KHz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from No centered between N/A. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
4 x 150W RMS 4-Channel Amplifier
Delivers 2 x 400 watts RMS at 4 ohms, 4 x 240 watts RMS at 2 ohms and 4 x 150 watts RMS at 4 ohms. Power scales as impedance drops, so check the rating at the impedance you plan to run before matching speakers.
Class D Car Amplifier Design
A Class D topology runs cooler and draws less current than a conventional amplifier at the same output, with rated efficiency of 90%. That means less strain on your electrical system and a smaller chassis for the same power.
Bridgeable Channels for a Subwoofer
Bridge the channels to combine their output and drive a subwoofer or a pair of higher-power speakers from the same amplifier, which lets one amp cover both your speakers and your bass instead of buying two.
Adjustable Crossover and Bass Boost
Onboard tuning includes a selectable FULL/LPF/HPF crossover covering 40Hz-4KHz and bass boost adjustable from No centered between N/A. Send each channel only the frequencies it should play and dial in the low end without adding an external processor.
Protection Circuitry and Cooling
Built with thermal, over-load, dc output and short circuit output protection, so the amplifier shuts itself down before a wiring fault, a short or overheating can damage it or your speakers. That is what keeps 4-channel amplifiers alive in daily-driven vehicles.
- Amplifier ClassDNumber Of Channels4Bass BoostNoneBridgeableYes
Reviews
This product doesn't have any reviews yet.
Compare similar products

The ZR600.4D is a 4-channel car amplifier from the DS18 ZR series, built as a Class D design. It delivers 2 x 400 watts RMS at 4 ohms, 4 x 240 watts RMS at 2 ohms and 4 x 150 watts RMS at 4 ohms. The channels are bridgeable, so you can combine them to drive a subwoofer or a pair of higher-power speakers from the same amplifier. Total harmonic distortion is rated at 1.00% with a signal-to-noise ratio of greater than 90dB. A selectable FULL/LPF/HPF crossover covers 40Hz-4KHz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from No centered between N/A. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.

Boost the sound of vehicle door speakers with this KICKER four-channel amplifier. The variable bass boost lets you easily tune the system as desired, and Fail-safe Integration Technology-PLUS provides clear sounds with its noise rejection. This KICKER four-channel amplifier features high-efficiency heat sinks, preventing overheating during long periods of use.

The SXE-3000.4D/BK is a 4-channel car amplifier from the DS18 SXE series, built as a Class D design. It delivers 2 x 500 watts RMS at 4 ohms, 4 x 320 watts RMS at 2 ohms and 4 x 200 watts RMS at 4 ohms. The channels are bridgeable, so you can combine them to drive a subwoofer or a pair of higher-power speakers from the same amplifier. Total harmonic distortion is rated at 0.05% with a signal-to-noise ratio of 90dB. A selectable HPF/FULL/LPF crossover covers 40HZ-2KHZ, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from NO centered between N/A. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.

Listen to your favorite Hi-Res music and podcasts with this Alpine four-channel amplifier. The Next-Generation R-Series Amplifiers are Hi-Res Audio Certified and able to reproduce up to 45kHz frequency response. This ultra-wide bandwidth brings music even closer to the original source while the classic R-Series design maintains the “loud and fun” performance quality that long-time fans have come to enjoy. The R2-A60F features a reduced footprint that’s 15% smaller than the previous model (R-A60F), making it easier than ever to install in most vehicle applications while still getting the same powerhouse performance.
| Pros for DS18 Audio - ZR 4-Channel Class D Car Amplifier, 4 x 150W RMS at 4 Ohm - Black | |||
|---|---|---|---|
| There were no pros for this product— | Sound Quality, Power, Ease of use, Size, Price | There were no pros for this product— | There were no pros for this product— |
| Cons for DS18 Audio - ZR 4-Channel Class D Car Amplifier, 4 x 150W RMS at 4 Ohm - Black | |||
| There were no cons for this product— | Heat | There were no cons for this product— | There were no cons for this product— |
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.











































