OSD Audio - Nero HTX4150 4-Channel Class D Power Amplifier, 175W RMS per Channel, Bridgeable, Fan Cooled - Black
Reviews coming soon
About this product
The Nero HTX4150 is a 4-channel Class D power amplifier rated at 175W per channel into 4 ohms and 100W per channel into 8 ohms with all channels driven, not the single-channel figures most competitors publish. Adjacent channels can be bridged to produce 2 x 400W into 8 ohms, or 1 x 400W plus 2 x 175W, so a single chassis handles several system layouts. Two bridged channels can also serve as a subwoofer amplifier with frequency crossover and level control. A 105dB A-weighted signal-to-noise ratio at rated power gives the amplifier exceptional dynamic range, and 10Hz to 30kHz frequency response covers the full audible band with margin at both ends. Fan-assisted cooling keeps the chassis running cool in confined spaces such as an equipment rack or credenza, while a switching power supply rejects RF interference from nearby electronics. RCA inputs, a 12V trigger, per-channel status LEDs and a ground terminal for troubleshooting hum complete the package.
Features
175W x4 with All Channels Driven
Output is rated at 175W RMS per channel into 4 ohms and 100W per channel into 8 ohms with all four channels driven simultaneously at 1% THD, not with one channel measured in isolation. Single-channel output reaches 200W at 4 ohms. This gives a realistic picture of how the amplifier performs in an actual system.
Configurable for 2, 3 or 4 Channels
Adjacent channels bridge to produce 2 x 400W into 8 ohms, or 1 x 400W plus 2 x 175W. Two bridged channels can run a passive subwoofer with onboard crossover and level control, which makes this a strong fit for an outdoor system with two patio speakers and a sub, or for a home theater needing surround plus bass.
105dB Signal-to-Noise for Wide Dynamic Range
A 105dB A-weighted signal-to-noise ratio at rated power combined with 10Hz to 30kHz frequency response and a damping factor of 90 delivers a silent background and firm speaker control. Quiet passages stay free of hiss while peaks arrive with full impact, reaching reference cinema levels across all channels.
Fan-Assisted Cooling for Tight Spaces
Class D efficiency rated at 88 percent, combined with active fan cooling, lets the amplifier operate reliably inside a closed rack, cabinet or credenza where ventilation is limited. A switching power supply provides strong rejection of RF from nearby electronics and from the mains supply.
12V Trigger, Status LEDs and Ground Terminal
A 12V trigger handles remote power on and off for automated systems. Per-channel LEDs show on, standby or protection status at a glance. A dedicated ground terminal helps troubleshoot hum in complex installations. Rack mountable, 15.16 by 16.73 by 3.46 inches, CE/UL certified, 2-year warranty.
Specifications
- Continuous Watts x Channel @ Ohms175W x 4 @ 4 Ohms; 100W x 4 @ 8 Ohms, all channels drivenNumber of Channels4Number of Audio Zones1Network Connector(s)No network connectors
Reviews
This product doesn't have any reviews yet.
Compare similar products
The Nero HTX4150 is a 4-channel Class D power amplifier rated at 175W per channel into 4 ohms and 100W per channel into 8 ohms with all channels driven, not the single-channel figures most competitors publish. Adjacent channels can be bridged to produce 2 x 400W into 8 ohms, or 1 x 400W plus 2 x 175W, so a single chassis handles several system layouts. Two bridged channels can also serve as a subwoofer amplifier with frequency crossover and level control. A 105dB A-weighted signal-to-noise ratio at rated power gives the amplifier exceptional dynamic range, and 10Hz to 30kHz frequency response covers the full audible band with margin at both ends. Fan-assisted cooling keeps the chassis running cool in confined spaces such as an equipment rack or credenza, while a switching power supply rejects RF interference from nearby electronics. RCA inputs, a 12V trigger, per-channel status LEDs and a ground terminal for troubleshooting hum complete the package.
The SMP200 is a compact Class D mono subwoofer amplifier built to power passive subwoofers in home theater and whole-house audio systems. It supplies 120W RMS at 8 ohms with 240W peak, or 200W RMS at 4 ohms with 400W peak, giving in-wall and stand-alone passive subs the power they need for low-frequency impact on movie and music soundtracks. An advanced crossover circuit adjusts from 35Hz to 160Hz using the front-panel control knob, with additional front-panel phase and volume controls to dial in the right amount of low-frequency effect for the room. Inputs accept either speaker-level or line-level RCA connections, so the amplifier works with both modern receivers and older source equipment. Auto-sensing turns the amplifier on when a signal is detected and off when it is not, and a 12V trigger mode supports integration with automated systems. The chassis measures 8.5 by 1.75 by 9.8 inches and weighs 6.7 pounds, fitting easily into a rack or cabinet.
The Nero Stream WRA is a compact weather-resistant streaming amplifier built for patios, decks, pool areas and other outdoor listening spaces. Class D amplification supplies 25W x4 RMS at 8 ohms and 50W x4 RMS at 4 ohms across four channels, enough to drive up to four outdoor speakers from a single unit. The IP64-rated housing resists water and dust, so the amplifier can be installed anywhere with access to an AC outlet rather than tucked into an indoor rack. Wi-Fi streaming over the 2.4 GHz band works with the free OSD Audio Player App, which turns a phone or tablet into a remote for volume and source control across Spotify, Amazon Music, Tidal, iHeartRadio, TuneIn and other services. Left and right RCA line inputs accept an external source such as a media player or TV feed, making an outdoor theater setup straightforward. Front-panel indicators show source, volume, EQ, power and connection reset status.
The MX880 is a 4-zone, 8-channel Class D amplifier for residential and commercial distributed audio systems that need reliable power across multiple rooms. Each channel is rated at 80W into 4 ohms and 50W into 8 ohms, and every zone includes a bridge switch that combines both channels into a single 160W output at 8 ohms for larger spaces or 70V-style long runs. Independent zone control with global and per-zone triggering lets each area run its own source through the zone line input, or follow a shared bus feed through Bus In 1 and Bus In 2. Signal auto-sensing powers the amplifier up when audio is detected and down when it stops, reducing standby consumption in always-on installations. Protection circuitry guards against thermal overload and short circuits. The slim 2U chassis is rack mountable with hardware included, runs cool thanks to Class D efficiency, and provides individual output level controls plus detachable speaker terminals accepting up to 14AWG.
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
