OSD Audio - XMP300 GEN2 600W Class D Stereo Amplifier with A/B Speaker Switching and 24/192 USB Audio - Black
Reviews coming soon
About this product
The XMP300 GEN2 is a high-output Class D stereo amplifier for home, studio and distributed audio systems. It delivers 150W x2 RMS into 8 ohms, 300W x2 RMS into 4 ohms, or 600W bridged mono into 8 ohms, with a signal-to-noise ratio above 90dB for clear, low-noise sound. Four separate inputs include 24/192 USB audio and dual line-level inputs with automatic source switching: connect a TV or digital audio device as the main source and a music streamer to the interrupt input, and the amplifier switches automatically when the secondary source starts, then returns to the primary when it stops. Front-panel volume, balance and A/B speaker selection plus bass and treble controls tune the sound to the room. Two 8-ohm speaker pairs can be connected and switched on or off independently, making it easy to add outdoor or second-room speakers. Trigger and auto-sensing power modes allow the amplifier to be installed out of sight. Multi-voltage 100V to 240V operation with a 2-year warranty.
Features
600W Bridged or 300W x2 at 4 Ohms
Class D amplification supplies 150W x2 RMS into 8 ohms, 300W x2 RMS into 4 ohms, or 600W bridged mono into 8 ohms from the A or B output. That is triple the output of the XMP100 GEN2, giving the headroom to drive large rooms, low-sensitivity speakers or long distributed audio runs.
Automatic Interrupt Source Switching
Dual line-level inputs manage a main source plus an interrupt source. Connect a TV or digital player as the primary and a streamer such as the SRT1 Gen2 to the interrupt input. The amplifier detects the incoming signal, switches automatically, then returns to the primary source when playback ends.
A and B Speaker Switching for Two Zones
Two 8-ohm speaker pairs connect simultaneously and switch on or off from the front panel. One amplifier covers a main listening area and a patio or second room, avoiding the cost of a second amplifier or a dedicated distribution system for a simple two-zone setup.
24/192 USB Audio and Tone Controls
A USB Type-A input supports high-definition audio up to 24-bit/192kHz alongside RCA line and interrupt inputs, with signal-level and speaker-level outputs. Bass and treble controls provide plus or minus 12dB at 100Hz and 10kHz, and front-panel balance and volume complete the adjustment set.
Stereo or Bridged Mono, Multi-Voltage Power
A rear-panel switch configures stereo or bridged mono output, and trigger functions support automated systems. The 16.92 by 1.73 by 7.92 inch chassis weighs 8 pounds and accepts 100V to 240V, 50 to 60Hz. Signal-to-noise above 90dB, 20Hz to 20kHz response, 2-year warranty.
Specifications
- Continuous Watts x Channel @ Ohms300W x 2 @ 4 Ohms; 150W x 2 @ 8 OhmsNumber of Channels4Number of Audio Zones1Network Connector(s)No network connectors
Reviews
This product doesn't have any reviews yet.
Compare similar products
The XMP300 GEN2 is a high-output Class D stereo amplifier for home, studio and distributed audio systems. It delivers 150W x2 RMS into 8 ohms, 300W x2 RMS into 4 ohms, or 600W bridged mono into 8 ohms, with a signal-to-noise ratio above 90dB for clear, low-noise sound. Four separate inputs include 24/192 USB audio and dual line-level inputs with automatic source switching: connect a TV or digital audio device as the main source and a music streamer to the interrupt input, and the amplifier switches automatically when the secondary source starts, then returns to the primary when it stops. Front-panel volume, balance and A/B speaker selection plus bass and treble controls tune the sound to the room. Two 8-ohm speaker pairs can be connected and switched on or off independently, making it easy to add outdoor or second-room speakers. Trigger and auto-sensing power modes allow the amplifier to be installed out of sight. Multi-voltage 100V to 240V operation with a 2-year warranty.
The RB-1552MKII is a close sibling to the RB-1582MKII, sharing the same platform and delivering a robust 2 x 130 Watts power output. Experience exceptional performance with this formidable stereo amplifier.
The AMP 20 is a remarkably powerful 12-channel amplifier. Pair with AV 20 and any of our CINEMA Series products for an elite, reference-level home theater system. AMP 20 is rated at 200 watts per channel into 8 ohms and 400 watts per channel into 4 ohms. AMP 20 is built on Marantz exclusive HDAM and redesigned Class D amplification.
The Pyle Hybrid Amplifier Receiver - Home Theater Stereo System Bluetooth Streaming MP3/USB/SD Readers AM/FM Radio 300 Watt - Home Theater Amplifier Receiver System - Ability to Connect External Devices & Speakers - Built-in Bluetooth for Wireless Music Streaming - MP3 Digital Audio File Support - USB Flash & SD Memory Card Readers - AM/FM Radio with LCD Display - (2) 1/4’’ Microphone Inputs - RCA (L/R) Audio Input/Output - Banana Binding Post Speaker Output Jacks - Front Panel Button Control Center - Echo Bass Treble Sub Mic Volume Adjustable - Includes Remote Control & Power Cable - Bluetooth Connectivity: - Instantly Receives Wireless Music Streaming - Works with all of Your Favorite Devices - (iPhone Android Smartphone iPad Tablet etc.). DETAILSFeatures: Home Theater Amplifier Receiver System Ability to Connect External Devices & Speakers Built-in Bluetooth for Wireless Music Streaming MP3 Digital Audio File Support USB Flash & SD Memory Card Readers AM/FM Radio with LCD Display (2) 1/4’’ Microphone Inputs RCA (L/R) Audio Input/Output Banana Binding Post Speaker Output Jacks Front Panel Button Control Center Echo Bass Treble Sub Mic Volume Adjustable Includes Remote Control & Power Cable Bluetooth Connectivity: Instantly Receives Wireless Music Streaming Works with all of Your Favorite Devices (iPhone Android Smartphone iPad Tablet etc.) Bluetooth Version: 5.1 Bluetooth Network Name:‘PYLEUSA’ or ‘BT’ Bluetooth Password Required: ‘0000’ (4 Zeroes) Technical Specs: MAX Power Output: 300 Watt 30 Watt x 2 @ 8 Ohm 60 Watt x 2 @ 4 Ohm Frequency Response: 40-15kHz (+/-2dB) T.H.D.: Signal-to-Noise Ratio: 76dB Input Sensitivity: 400mV Aux 6mV Mic Radio Station Memory: 50 Presets Tuner: Quartz Synthesizer Maximum USB/SD Card Support Size: Up to 32 GB Digital Media File Support: MP3 WMA Battery Operated Remote Requires (2) x ‘AAA’ Not Included Power: 110/220V Switchable Dimensions (L x W x H): 19.0’’ x 11.8’’ x 3.2’’ -inchesWhats In The BoxHybrid Amplifier Receiver Remote Control AM & FM Antennas Power Cable
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
Customers often buy these together
More to consider
Your sound, your style Sponsored
$189.99The price was $299.99
