Plus5 Combo Enclosed CoreXY FDM 3D Printer with QIDI Box Multi-Color, 65C Heated Chamber, 600mm/s, 320x320x300mm - Black
Reviews coming soon
About this product
The QIDI Plus5 Combo pairs the enclosed CoreXY Plus5 printer with the QIDI Box multi-material system for true multi-color and multi-material printing out of the box. The printer's 320 x 320 x 300 mm build volume, third-generation independent chamber heater (550W, up to 65 degrees C), and 370 degrees C bimetal hotend handle ABS, ASA, PA, PC, PPS-CF, and carbon fiber composites with minimal warping. The included QIDI Box loads four spools, dries filament at up to 65 degrees C while printing, and switches materials automatically for multi-color models and dissolvable support structures; chain up to four units for 16 colors. Hardened steel dual gears feed abrasive composites reliably, and RFID recognition, run-out, tangle, and clog detection keep long prints unattended. A load cell sensor in the hotend delivers hands-free automatic leveling, the 1080P AI camera detects print failures, and the 3-in-1 filter (G3 pre-filter, H12 HEPA, coconut shell activated carbon) captures 99.5 percent of particles for safe indoor use. Dual-band Wi-Fi, Ethernet, and USB, with full QIDI Studio, OrcaSlicer, and PrusaSlicer support.
Features
320x320x300MM BUILD VOLUME, 18 PERCENT LARGER
Print helmets, enclosures, jigs, and batch production runs on a 320 x 320 x 300 mm plate - 18 percent more volume than the previous generation in nearly the same machine footprint, with a double-sided PEI magnetic build plate heated to 120 degrees C by a full-surface 500W silicone heater.
3RD-GEN 65C CHAMBER AND 370C HOTEND
A 550W third-generation independent chamber heater reaches 65 degrees C about 38 percent faster than the previous design, and the bimetal hotend reaches 370 degrees C - so ABS, ASA, PA, PC, PPS-CF, and carbon fiber composites print with minimal warping and strong layer adhesion.
HANDS-FREE LOAD CELL LEVELING
A load cell sensor built into the hotend measures the bed directly, delivering true zero-offset first layers with no manual calibration and no guesswork. Ships fully assembled and pre-calibrated, with a 4-inch 800x480 color touchscreen and RGB status lighting.
AI CAMERA AND 3-IN-1 AIR FILTRATION
The 1080P AI camera detects print failures and supports timelapse recording, while the 3-in-1 filter cartridge (G3 pre-filter, H12 HEPA, coconut shell activated carbon) captures 99.5 percent of dust and particles. Multi-sensor closed-loop thermal control and a flame-retardant chamber make overnight and high-temperature printing safer.
QIDI BOX INCLUDED FOR MULTI-COLOR PRINTING
The bundled QIDI Box loads four spools, dries filament at 65 degrees C while you print, and switches materials automatically for multi-color models and dissolvable supports. Hardened steel dual gears handle abrasive composites, and RFID recognition with run-out, tangle, and clog detection keeps long jobs unattended. Chain up to four QIDI Box units for 16 colors (additional units sold separately).
Specifications
- NetworkingWireless, WiredPrinter Type3D PrinterLeveling CapabilityFully automatic with load cell sensor
Reviews
This product doesn't have any reviews yet.
Compare similar products
The QIDI Plus5 Combo pairs the enclosed CoreXY Plus5 printer with the QIDI Box multi-material system for true multi-color and multi-material printing out of the box. The printer's 320 x 320 x 300 mm build volume, third-generation independent chamber heater (550W, up to 65 degrees C), and 370 degrees C bimetal hotend handle ABS, ASA, PA, PC, PPS-CF, and carbon fiber composites with minimal warping. The included QIDI Box loads four spools, dries filament at up to 65 degrees C while printing, and switches materials automatically for multi-color models and dissolvable support structures; chain up to four units for 16 colors. Hardened steel dual gears feed abrasive composites reliably, and RFID recognition, run-out, tangle, and clog detection keep long prints unattended. A load cell sensor in the hotend delivers hands-free automatic leveling, the 1080P AI camera detects print failures, and the 3-in-1 filter (G3 pre-filter, H12 HEPA, coconut shell activated carbon) captures 99.5 percent of particles for safe indoor use. Dual-band Wi-Fi, Ethernet, and USB, with full QIDI Studio, OrcaSlicer, and PrusaSlicer support.
The QIDI Max4 is a large-format enclosed CoreXY 3D printer built for workshops, engineers, and small-batch production. Its 390 x 390 x 340 mm build volume is among the largest in its class, while the 65 degrees C actively heated chamber and 370 degrees C bimetal hotend print ABS, ASA, PA, PC, PPS-CF, and other engineering composites with minimal warping. Closed-loop XY motors with FOC control, a linear X-axis rail, and dual independent Z lead screws keep 800mm/s moves stable across the full bed. A load-cell auto-leveling system delivers zero-offset first layers, the onboard camera detects first-layer and filament failures automatically, and the 3-in-1 filtration system (G3 pre-filter, H12 HEPA, activated carbon) reduces odors and particles for safe indoor use. Compatible with the QIDI Box multi-material system for up to 16 colors and full OrcaSlicer and PrusaSlicer support.
The QIDI Max4 Combo pairs the large-format enclosed Max4 CoreXY printer with the QIDI Box multi-material system for multi-color printing straight out of the box. Its 390 x 390 x 340 mm build volume is among the largest in its class, while the 65 degrees C actively heated chamber and 370 degrees C bimetal hotend print ABS, ASA, PA, PC, PPS-CF, and other engineering composites with minimal warping. Closed-loop XY motors with FOC control, a linear X-axis rail, and dual independent Z lead screws keep 800mm/s moves stable across the full bed. The bundled QIDI Box dries four spools of filament at 65 degrees C while printing and switches materials automatically for multi-color models and soluble support structures. A load-cell auto-leveling system delivers zero-offset first layers, the onboard camera detects first-layer and filament failures automatically, and the 3-in-1 filtration (G3 pre-filter, H12 HEPA, activated carbon) reduces odors and particles for indoor use. Compatible with OrcaSlicer, PrusaSlicer, and Klipper/Fluidd.
Multi-Color Printing; Full-auto Calibration; Active Flow Rate Compensation; 256 x 256 x 256mm Print Size. Full-size build volume, fully automated calibration, multi-color printing with AMS lite, a perfect gateway to 3D printing.
| Pros for Plus5 Combo Enclosed CoreXY FDM 3D Printer with QIDI Box Multi-Color, 65C Heated Chamber, 600mm/s, 320x320x300mm - Black | |||
|---|---|---|---|
| There were no pros for this product— | There were no pros for this product— | There were no pros for this product— | Ease of Use, Overall Performance, Print Quality, Setup, Noise Level |
| Cons for Plus5 Combo Enclosed CoreXY FDM 3D Printer with QIDI Box Multi-Color, 65C Heated Chamber, 600mm/s, 320x320x300mm - Black | |||
| There were no cons for this product— | There were no cons for this product— | There were no cons for this product— | Filament Handling |
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
Customers often buy these together
More to consider
Explore, Play, Collect Sponsored
Keep exploring
$1,299.00The price was $2,399.00
$459.00The price was $599.00
$489.00The price was $639.00
$469.00The price was $619.00
