Powerbass - PS-AWB101 - 10" Single Loaded Amplified Ported Enclosure - Black/Gray

PowerBass PS-WB101 10" Vented Loaded Enclosure Bass is their backbone at PowerBass and their engineers have designed an affordable, yet powerful self contained solution to put a new low in the bottom end of your sound system with PS-WB loaded woofer boxes. They take a unique design approach and engineer the woofers to fit the box, not the other way around like our competition. This gives our enclosures a deeper, tighter bass that handles more power for your hard earned cash. Features - • Heavy Duty Single 10" Bass Reflex Box Design • Computer Optimized Acoustic Chamber • Bass Reflex Aero/Slot Port System • 2-Layer DDC Coated Black Ribbed Paper Cone • 2" BASV High Temperature Voice Coil • Double Pressed Treated Foam Surround • 2-Tone Aircraft Grade Vinyl Finish • Single 4-ohm Input • 250 Watts RMS/500 Watts Max Specifications - • Nominal Impedance: Single 4-ohm Input • Bottom Depth: 13.75" • Top Depth: 11.4" • Height: 12.25" • Width: 17" • Material: DDC coted paper • Sensitivity (1W / 1M): 96 dB • Dimensions (in Inches): 17" x 12.25 x 11.4" (top depth) x 13.75" (bottom depth) • Size: Single 12" • Frequency Response: 33 Hz - 150 Hz • Power Handling (RMS/Peak): 250 / 500 watts

Experience pounding bass with this CompRT 10-inch subwoofer. This slim speaker is fewer than 4 inches deep for easier mounting. It features dual 2-ohm voice coils and employs a large-diameter, progressive-roll spider for minimal distortion. Use this CompRT 10-inch subwoofer with a sealed or ported enclosure and 400W of power.

PowerBass PS-ADF110T 10" Amplified Down firing Enclosure PowerBass's latest release is an Amplified down firing single 10-inch woofer enclosure designed for pick-ups, crew cabs and king cabs. The PS-ADF110T uses an "S" thin woofer and is finished in a mix of grey vinyl and black carpet and comes with a built in 175W RMS amplifier. By having the woofer point downward helps load the front of the woofer for more bass output than a standard front firing enclosure. It's small size makes it an instant winner for producing the bass that is missing in your system without taking up a lot of room or breaking the bank. Features - • Single 10" 175 Watt RMS Amplified Down firing Enclosure • Computer Optimized 10" Thin Subwoofer Enclosure • Custom Injected Molded Cone • Large Roll Rubber Surround • 2" Vented KSV Voice Coil Former • Perimeter Aero Voice Coil Venting • Poly-carbonate/Glass Fiber Composite Turbine Basket • Chrome Push Terminals • 2-Tone Vinyl/Carpet Finish • 1-Channel 275 Watt High Efficiency Class A/B Design • High Level (Speaker)/Low Level RCA input • Soft Delay Turn On/Off Circuit • Auto Turn-on (high level input only) • Variable Low Pass Electronic Crossover 50Hz - 200Hz • Variable 12db Bass Boost EQ @ 45Hz • Variable Gain Control • Protection Circuit: Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output • Wired Remote Gain Control Included • Down Firing Air Suspension Enclosure • Heavy-Duty Reinforced Box Design • Mounting Hardware Included Specifications - • Selectable Subwoofer EQ: 45Hz • Nominal Impedance: 4-ohm • Voice Coil Size: 2 in • Material: pp cone • Magnet Size: 116 oz • Sensitivity (1W / 1M): 91 db • 4-ohm Mono Power: 275W • 4-ohm Power: 275W • Low-Pass Crossover Freq: 50Hz-200Hz • Peak Power: 500W • Dimensions (in Inches): 5.6" x 12.4" x 17.8" • Output Power (14.4 V) @ 4 ohm: 275W • Size: 10 in shallow • Frequency Response: 38Hz - 280Hz • Voice Coil Size: 2" • Power Handling (RMS/Peak): 275 / 500 watts