Thermal Grizzly - TG Putty Basic 30g – Non-Conductive Thermal Paste for GPU Modding & Thermal Pad Replacement

TG Thermal Putty is an electrically non-conductive alternative to conventional thermal pads. As an easy-to-apply and flexible “gap filler”, it compensates for height differences, making it an ideal replacement for thermal pads on graphics cards.Thermal Putty is applied either with a spatula or by hand. It can be spread over a large surface or shaped into small beads, perfectly adapting to the surface it is applied to. It compensates for height differences ranging from 0.2 to 3.0 mm, ensuring optimal thermal transfer.Choose the thermal conductivity that suits your project: Basic, Advanced, or Pro. Whether for standard applications or high-end cooling, TG Thermal Putty provides the ideal solution.

The phase-change material on which the PhaseSheet PTM is based is solid at room temperature. The material only begins to liquefy at temperatures above 45 degrees Celsius. A high contact pressure of around 300-400N is required for optimum distribution of the liquid PhaseSheet PTM and thus the lowest possible layer thickness. PhaseSheet PTM has a very low viscosity in its liquid state and contracts again when it changes to a solid material, thus minimizing the pump-out effect. The pump-out effect is particularly pronounced when combining a copper cooler on a graphics chip because silicon and copper have different linear expansion when heated. The temperatures under load cause the heatspreader and the base plate to deform (concave or convex) and return to their original shape (straight) when they cool down. As a result, the thermal paste is slowly pressed out between the heatspreader and the base plate of the CPU cooler, for example. Outstanding thermal conductivity consistently high performance Very long service life Versatile in application Not electrically conductive Easy to use PhaseSheet PTM is more durable than traditional thermal pastes, but not as durable as KryoSheet, for example, which is virtually maintenance-free. PhaseSheet PTM develops and stabilizes its maximum thermal conductivity after around ten thermal cycles above 60 degrees Celsius. Scope of Delivery 1x PhaseSheet PTM

XTM70 Extreme Performance Thermal Paste enables maximum heat transfer from your high-end processor and components so they can stay reliably cool, during even the most intense tasks and overclocking. XTM70 spreads evenly and cleanly due to its low viscosity, resulting in peak thermal transfer on Intel and AMD processors up to 250W TDP and higher. The included applicator kit makes it easy to apply an even layer onto a cold plate, alongside three included cleaning wipes to handily remove old paste from your hardware. With 3g of non-electrically conductive paste, XTM70 helps support extreme CPU cooling and lower temperatures without drying or cracking.