Audio-Technica - Audio Technica AT-VM95EN/H Headshell/Cartridge Kit - Orange
More Buying Options from Marketplace sellers
About This Item
- Key Specs
- Accessory Type: Turntable Accessory
- Model Compatibility: Audio-Technica Turntables
- General
- Brand: Audio-Technica
- Model Number: AUD ATVM95ENH
- Product Name: Audio Technica AT-VM95EN/H Headshell/Cartridge Kit
- Color: Orange
- Features
- Accessory Type: Turntable Accessory
- Quantity: 1
- Compatibility
- Model Compatibility: Audio-Technica Turntables
- Dimensions
- Product Width: 3 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 5 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Warranty
- Warranty - Parts: U.S. ONE-YEAR LIMITED END-USER WARRANTY
- Warranty - Labor: U.S. ONE-YEAR LIMITED END-USER WARRANTY
- Other
- UPC: 4961310146511
The AT-VM95EN/H combo kit includes the AT-VM95EN dual moving magnet cartridge premounted on the AT-HS6BK headshell. VM dual magnet cartridge with 0.3 x 0.7 mil elliptical nude stylus. Aluminum cantilever. Specially wound coils increase output voltage. Durable low-resonance polymer housing. Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts or washers required. Compatible with any AT-VMN95 replacement stylus. Universal ½"-mount headshell for 4-pin turntable cartridges.
- Frequency Response: 20-23,000 Hz
- Stylus Construction: Nude round shank
- Recommended Load Impedance: 47,000 ohms
- Stylus Shape: 0.3 x 0.7 mil elliptical
- Cantilever: Aluminum pipe
- Mount: Half-inch
- Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver
Whats Included
- Audio Technica AT-VM95EN/H Headshell/Cartridge Kit
Product Manuals
Q: Will this work with a Technics SL-23A?
A: It will but note that the stylus overhang for the AT-VM95C/H comes set at 15.5mm and the overhang specified in Technics SL23 documentation is 14mm so you may want to back the cartridge up 1.5mm.
A: Yes, it will fit and the cartridge comes pre-mounted and pre-wired to to the headshell. Stylus overhang is set at 15.5mm.
Q: Will this work with a Pioneer PL-100 turntable?
A: Yes, it will.
A: No, it will not. You must use the ANGLED headshell that was provided with your AT-LP3 Turntable. Get the AT-VM95E Cartridge (cartridge only) instead.
Q: Will this work with a Technics SL-D2?
A: Yes it will.
Q: Will this fit a Denon DP DJ 100? Thank you
A: It will fit, the only thing you will need to check on is the stylus overhang distance. Our Headshell/Cartridge Combo Kits come with the overhang set at 15.5mm. We have not been able to determine what the stylus overhang distance for the Denon turntable is, we advise being within .5mm of the turntable manufactures specified stylus overhang distance.
Q: Will this fit my Sony PS-LX3 turntable?
A: It will not. You can use the cartridge itself, the AT-VM95E, but not the headshell. Your turntable has a straight tonearm and an angled headshell, you must use the Sony angled headshell.
Q: Will the AT-VM95ML/H work on a Fisher MT-6224 turntable?
A: Yes, it will.
Reviews
Rating 4.9 out of 5 stars with 28 reviews
Top Mentions
- Sound Quality (16)
- Ease of use (4)
Customer Images
The vast majority of our reviews come from verified purchases. Reviews from customers may include My Best Buy members, employees, and Tech Insider Network members (as tagged). Select reviewers may receive discounted products, promotional considerations or entries into drawings for honest, helpful reviews.
Compare similar products
The AT-VM95EN/H combo kit includes the AT-VM95EN dual moving magnet cartridge premounted on the AT-HS6BK headshell. VM dual magnet cartridge with 0.3 x 0.7 mil elliptical nude stylus. Aluminum cantilever. Specially wound coils increase output voltage. Durable low-resonance polymer housing. Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts or washers required. Compatible with any AT-VMN95 replacement stylus. Universal ½"-mount headshell for 4-pin turntable cartridges.
The AT-VM95E/H combo kit includes the AT-VM95E dual moving magnet cartridge premounted on the AT-HS6BK headshell.FeaturesElliptical Bonded Stylus on an Aluminum CantileverDual Moving Magnet DesignDurable Low-Resonance HosingHigh Output Level (4.0mV)VM95 SeriesThis VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.What's in the BoxAT-VM95E/H Headshell & MM Cartridge Combo KitInstallation HardwareSpecificationsFrequency Response: 20-22000 HzChannel Separation: 20 (dB at 1 kHz)Vertical Tracking Angle: 23°Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)Stylus Construction: Bonded round shankRecommended Load Impedance: 47000 ohmsCoil Impedance: 3.3 k ohms (1 kHz)DC Resistance: 485 ohmsCoil Inductance: 550 mH (1 kHz)Output Voltage: 4.0 mV (1 kHz 5 cm/sec.)Output Channel Balance: 2.0 dB (1 kHz)Stylus Shape: 0.3 x 0.7 mil ellipticalCantilever: Aluminum pipeStatic Compliance: 17 x 10 – 6 cm / dyneDynamic Compliance: 7 x 10 – 6 cm / dyne (100 Hz)Mounting: Half-inchDimensions (Cartridge & Headshell): 0.84" x 0.83" × 2.46"Model: AT-VM95E/HMounting Feature: H
This VM95 Series cartridge with 0.3 x 0.7 mil elliptical nude stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical nude stylus. Aluminum cantilever. Durable low-resonance polymer housing. Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required. Compatible with any AT-VMN95 replacement stylus.
The AT-VM95C/H combo kit includes the AT-VM95C dual moving magnet cartridge premounted on the AT-HS6BK headshell. VM dual magnet cartridge with 0.6 mil conical stylus. Aluminum cantilever. Specially wound coils increase output voltage. Durable low-resonance polymer housing. Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts or washers required. Compatible with any AT-VMN95 replacement stylus. Universal ½"-mount headshell for 4-pin turntable cartridges.
| Pros for Audio-Technica - Audio Technica AT-VM95EN/H Headshell/Cartridge Kit - Orange | |||
|---|---|---|---|
| Sound Quality, Ease of use | There were no pros for this product— | There were no pros for this product— | Sound Quality, Ease of use |
Specs
Customers often buy these together
More to consider
Your sound, your style Sponsored
Discover related products
$82.99The price was $103.95
$52.99The price was $54.99
$199.99The price was $279.99
$26.49The price was $32.99
Keep exploring
$74.99The price was $119.99
