Bella - Pro Series 14-Cup Coffee Maker - Black stainless steel

Q: QuestionDoes anyone have a clue where I can get a replacement coffee pot?? And the company’s customer service is absolutely no help! And unfortunately I don’t a warranty. Please help!

Asked 5 years ago by Casper.

• A:Answer You cannot replace - same thing happened to me and I tried

  Read More

  Answered 5 years ago by Hank

  Helpful (16)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionDoes anybody have a picture of under top lid area they could upload no where can i find even at manufacturer site.Because i would like to see water dispensing design and if they leave enough room that coffee grounds will not go on lid or in water tank?Thx

Asked 5 years ago by Kevin.

• A:Answer Hi Kevin, I just received this coffee maker 3 days ago and I am in love. But to your question... I don't have a photo but I can tell you that the the area for the grounds is much deeper than my my last Mr. Coffee (which always had the problem you are talking about) and even deeper than my Cuisinart coffee makers. The Bella also comes with a mesh filter which fits perfectly. I have also used paper filters and they turn out fine also no over spray of coffee grounds. The best thing about this coffee maker is that you can actually use less coffee and believe me, I love strong dark coffee. The first few times I used my typical amount of coffee and the coffee was great. Then, I tried the strength setting for the coffee. I cut back to 12 then 10 scoops of the scoop that comes with the Bella and OMG the coffee still has a rich full flavor. You may have purchased this coffee maker by now... or another brand.... but I am so excited I thought I would answer your question anyway. Happy Days!

  Read More

  I would recommend:

  • 

    Bella - Pro Series 14-Cup Coffee Maker - Black stainless steel

    User rating, 4.47 out of 5 stars with 1389 reviews.

    (1,389)

  Answered 5 years ago by danniefaye

  Helpful (11)Unhelpful (0)ReportAnswer this questionShow more answers (3)

Q: QuestionWhat size filters

Asked 6 years ago by Kim.

• A:Answer The 8-12 cup standard filters have been working OK so far.

  Read More

  Answered 5 years ago by PaulVerified Purchase

  Helpful (4)Unhelpful (1)ReportAnswer this questionShow more answers (5)

Q: QuestionHi i would like to purchase this but i would like to see a picture of under the lid to see the design.I think if somebody who owns could please take this pick and upload in a review i will see.I've looked all over and can't find.Even on Bella site.thx?

Asked 5 years ago by Kevin.

• A:Answer Sorry about the steam. I’m currently cleaning...here’s the photo.

  Read More

  Answered 5 years ago by Stacy123

  • 
  Helpful (5)Unhelpful (0)ReportAnswer this questionShow more answers (3)

Q: QuestionHow long does this coffee maker stay on? I have a ninja and it shuts off way to soon.

Asked 5 years ago by Debbie.

• A:Answer 2 hours. It shows in the screen how long since it brewed.

  Read More

  Answered 5 years ago by Thelma

  Helpful (6)Unhelpful (1)ReportAnswer this questionShow more answers (4)

Q: QuestionHow can i get a replacement coffee pot? I know this question was asked before, but i'm hoping these are now available.

Asked 4 years ago by John.

• A:Answer Sorry to say but unless you have warranty there is no way to purchase it separately. Look up Cuisinart 14-Cup Replacement Glass Carafe it's about $28 does the job but doesn't look as nice as the original one it comes with ):

  Read More

  Answered 4 years ago by Ashley

  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: Questionwhatarethedimensions?

Asked 5 years ago by Anonymous.

• A:Answer the base is approximately 7 1/2 inches square and the height is 14 inches

  Read More

  Answered 5 years ago by dutchessVerified Purchase

  Helpful (3)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionWe did not receive any instruction book with this coffee maker and would like to know how to program the different options. as we have tried different ways and now the pot shuts off when thru making coffee, and the warm plate doesn't stay on.

Asked 3 years ago by coffeemaker.

This question was asked about the related product: Bella - Pro Series 14-Cup Coffeemaker - Stainless Steel

• A:Answer Hello, thanks for reaching out. Please reach us at 1 866-832.4843 or email us at [email protected] and we will be happy to email it to you. SETTING UP THE MACHINE IMPORTANT: Before brewing, always check to make sure water level is past the MIN line and add water if needed. Never exceed the MAX fill line. NOTE: The amount of brewed coffee will always be less than the amount of water placed into the water reservoir; as much as 10% is absorbed by coffee grounds and filter. 1. Lift to open the Coffee Maker lid. Fill carafe with cold water and pour into water reservoir at the back of the unit. The transparent water gauge can be easily viewed inside unit. 2. Place empty carafe on the warming plate. 3. Place the permanent filter in the removable filter holder. Measure 2 level tablespoons or 1 scoop with the provided scooper cup, of drip or regular ground coffee for each cup of coffee desired. For stronger or milder coffee, adjust amount of coffee to suit your taste. 4. Lower the filter holder down into the housing. Close the lid. 5. Plug the power cord into 120V/60HZ power supply socket, the background indicator will illuminate, and “AM 12:00” will flash. The backlight indicator will go into sleep mode within 15 seconds if no further buttons are selected. 6. Press the ON/OFF button. The Coffee Maker will begin the brew cycle. NOTE: To interrupt the brew process at any time, press the ON/OFF button until you hear a beep. 7. Upon completion of the brew cycle, wait at least 1 minute until the dripping coffee from the flow valve into the carafe has stopped. The carafe lid should be kept in place to facilitate safe serving and help keep coffee at a proper serving temperature. Tilt the carafe slightly and pour the hot coffee very slowly, so that the flow of the brewed coffee does not exceed the width of the spout. Once the brew cycle is complete, the LCD screen will show the TIME SINCE BREW icon and 0:00 will begin counting up. This represents the time since the brew cycle finished. To shut down the unit, press the ON/OFF button. 8. Press ON/OFF button to turn the Coffee Maker OFF when the carafe is empty or when unit is not in use. SETTING THE CLOCK 1. When the coffee maker is plugged in “AM 12:00” will flash. 2. Press HOUR button to select the Hour. Press and hold HOUR to toggle quickly. 3. Press MINUTE button to select the minutes. Press and hold MINUTE to toggle quickly. 4. Press on the PROGRAM button to confirm the time 5. To re-set the clock: press and hold the PROGRAM button until the previously settime flashes. Then follow the clock setting method. BREW STRENGTH SELECTION 1. To select the strength of coffee push on the strength button. 2. For regular strength press once. 3. For gourmet strength press twice.The gourmet setting adjusts the brewing cycle of a full pot of coffee to extract a higher percent of solubles. This results in a more flavorful pot of coffee. 4. For bold strength press three times.The Bold setting adjusts the brewing cycle of a full pot of coffee, allowing more time for the coffee to “steep” to extract further oils and flavor from the coffee bean. This results in a bolder tasting pot of coffee 5. For 1-4 cup mode press 4 times. Automatically adjusts the brewing process for maximum flavor when brewing small quantities. Ideal for brewing 4 cups of coffee. * If 14 cups of water are poured into the water tank then 14 cups of coffee will brew. SETTING THE AUTO START Press the PROGRAM button. The clock will flash 12:00 AM. Follow the clock setting method to set hour and minute. To confirm your selection, press the program button. The unit will beep and display the current time along with the word PROGRAM. Once the current time reaches the set time for the auto brew, the unit will automatically start the brewing cycle. PAUSE AND SERVE If you wish to serve a cup of coffee before the brew cycle is complete, simply remove carafe from the warming plate. Dripping will automatically cease. Return the carafe onto the warming plate; dripping will resume. CAUTION: To prevent injury when utilizing the pause and serve feature, replace carafe within 30 seconds after removing during the brewing process. 1. After approximately 2 cups of coffee have been brewed, the carafe may be slowly removed and the coffee will stop dripping. 2. The flow valve is located on the bottom of the filter holder and is activated when the carafe is removed. (See Figure 1.) This design makes it possible for you to remove the carafe and pour a cup of coffee before the entire carafe is brewed. IMPORTANT: When replacing the filter holder, the flow valve must be properly inserted into the front hole of the machine, so that it can be seen as it sits on the top of the carafe lid. (See Figure 1.) 3. When using this feature, make sure that the carafe is replaced under the filter holder within 30 seconds to prevent overflow. KEEP WARM MODE To set the time for the Keep Warm feature press the KEEP WARM button. The KEEP WARM icon will appear and 2:00 hours will flash. The default keep warm time is 2 hours. To select the period of keep warm time push the KEEP WARM button. Each time the button is pushed the keep warm time will increase by increments of 30 minutes. The keep warm time is between 0 minutes up to 4 hours. Once the desired keep warm time is reached, press the PROGRAM button to confirm the selection. The coffee maker will beep. TIME SINCE BREW When the brew cycle is complete, TIME SINCE BREW will appear on the LCD display and the TIME SINCE BREW will count up from 0:00 to the selected KEEP WARM TIME to let you know how fresh your coffee is. After the KEEP WARM TIME is reached, the coffee maker will beep and the TIME SINCE BREW icon will disappear. The current time will reappear on the LCD display. AUTO SHUT OFF The coffee maker will automatically shut off once the keep warm time has elapsed after brew. 1. After approximately 2 cups of coffee have been brewed, the carafe may be slowly removed and the coffee will stop dripping. 2. The flow valve is located on the bottom of the filter holder and is activated when the carafe is removed. (See Figure 1.) This design makes it possible for you to remove the carafe and pour a cup of coffee before the entire carafe is brewed. IMPORTANT: When replacing the filter holder, the flow valve must be properly inserted into the front hole of the machine, so that it can be seen as it sits on the top of the carafe lid. (See Figure 1.) 3. When using this feature, make sure that the carafe is replaced under the filter holder within 30 seconds to prevent overflow. KEEP WARM MODE To set the time for the Keep Warm feature press the KEEP WARM button. The KEEP WARM icon will appear and 2:00 hours will flash. The default keep warm time is 2 hours. To select the period of keep warm time push the KEEP WARM button. Each time the button is pushed the keep warm time will increase by increments of 30 minutes. The keep warm time is between 0 minutes up to 4 hours. Once the desired keep warm time is reached, press the PROGRAM button to confirm the selection. The coffee maker will beep. TIME SINCE BREW When the brew cycle is complete, TIME SINCE BREW will appear on the LCD display and the TIME SINCE BREW will count up from 0:00 to the selected KEEP WARM TIME to let you know how fresh your coffee is. After the KEEP WARM TIME is reached, the coffee maker will beep and the TIME SINCE BREW icon will disappear. The current time will reappear on the LCD display. AUTO SHUT OFF The coffee maker will automatically shut off once the keep warm time has elapsed after brew. Hope this helps. Have a great day. The BELLA Team.

  Read More

  Answered 3 years ago by Bella Customer Service

  
  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)