Bowers & Wilkins - CWM Cinema 7 Dual 4" 2.5-Way In-Wall Speaker System - Black/White
- Key Specs
- Speaker Type: In-Wall
- RMS Power: 25 watts (The maximum amount of continuous power the device is able to handle.)
- General
- Product Name: CWM Cinema 7 Dual 4" 2.5-Way In-Wall Speaker System
- Brand: Bowers & Wilkins
- Model Number: CWM CINEMA-7
- Audio
- Speaker Type: In-Wall
- RMS Power: 25 watts (The maximum amount of continuous power the device is able to handle.)
- Peak Power Handling: 150 watts (The maximum amount of power an electronic device, like a speaker, can handle without damage. This refers to short bursts of power, while root mean square (RMS) power handling indicates the amount of continuous power a device can sustain. Higher levels of distortion can also occur at peak power levels when the device is powered beyond its recommended usage.)
- Impedance: 8 ohms (Describes the resistance of an electric signal throughout the system. Devices with low impedance require less power to deliver optimal signals but are more at risk for damage from overloading. Higher impedance requires more power but is more protected from overload damage.)
- Minimum Frequency Response: 45 hertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The minimum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Maximum Frequency Response: 50 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Sensitivity: 88 decibels
- Tweeter Size: 1 inches
- Midrange Size: 4 inches
- Woofer Size: 4 inches
- Connectivity
- Wireless Multi-Room Audio: false (Technology that allows multiple speakers and/or soundbars to be connected wirelessly and play audio in separate rooms.)
- Dimensions
- Product Height: 23.5 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 6.8 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 3.1 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Product Weight: 25 pounds (The out of box weight of the item.)
- Material
- Tweeter Material: Aluminum
- Midrange Material: Aramid fiber
- Woofer Material: Aramid fiber
- Included
- Cable(s) Included: None
- Speaker Wire Included: false
- Other
- UPC: 714346324217
Create an immersive audio setup with this Bowers & Wilkins CWM Cinema 7 in-wall speaker system, which features two 4" bass/midrange drivers, two 4" paper-cone bass drivers and a 1" Nautilus tube-loaded, aluminum-dome tweeter.
- 25-150W recommended amplifier power: For robust audio output.
- Two 4" Aramid fiber bass/midrange drivers: Along with two 4" paper-cone bass drivers and a 1" Nautilus tube-loaded, aluminum-dome tweeter create a rich, dynamic soundscape.
- QuickDogs fixing method: Allows quick and easy installation without tools.
- Magnetically attached metal grille: Along with an ultranarrow bezel offers a sleek look that complements your décor.
Whats Included
- CWM Cinema 7 Dual 4" 2.5-Way In-Wall Speaker System
- Grille
- Cutout template
- Owner's manual
Q: is It recommended or required to purchase a cabinet to install these inside a wall?
A: Hi Kevin, While you do not need to use a back-box with these speakers, that does give you the benefit of reducing the amount of sound that will be transmitted to an adjacent space. However, you would need to remove a large section of drywall to do so and install a Pre Mount Kit. If you are not comfortable with that additional work, you'll still get excellent performance from the CWM Cinema 7.
A: You would need an amplifier or audio video receiver to power your CWM Cinema 7. Most likely, the previous owner had one that was powering these speakers. To wirelessly stream music to the speakers through the receiver, you would need something like a Formation Audio (a product we make.)
A: Hi JDLCPM, You’ll be fine at those operating temperatures. What I would recommend on really cold winter days is not to immediately turn the volume up all of the way.
Q: Can you use this as a Center chanel speaker and CWM 664's as l & R?
A: i think you could. would look nice
