JBL - GX Series 12" Single-Voice-Coil 4-Ohm Subwoofer - Black
- Key Specs
- RMS Power: 250 watts (The maximum amount of continuous power the device is able to handle.)
- Peak Power Handling: 1000 watts (The maximum amount of power an electronic device, like a speaker, can handle without damage. This refers to short bursts of power, while root mean square (RMS) power handling indicates the amount of continuous power a device can sustain. Higher levels of distortion can also occur at peak power levels when the device is powered beyond its recommended usage.)
- Impedance: 4 ohms (Describes the resistance of an electric signal throughout the system. Devices with low impedance require less power to deliver optimal signals but are more at risk for damage from overloading. Higher impedance requires more power but is more protected from overload damage.)
- Minimum Frequency Response: 35 hertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The minimum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Maximum Frequency Response: 0.2 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Sensitivity: 90 decibels
- Dual Voice Coils: false
- Woofer Size: 12 inches
- Mount Depth: 6 inches
- General
- Product Name: GX Series 12" Single-Voice-Coil 4-Ohm Subwoofer
- Brand: JBL
- Number of Subwoofers Included: 1
- Model Number: GX1200
- Audio Power
- RMS Power: 250 watts (The maximum amount of continuous power the device is able to handle.)
- Peak Power Handling: 1000 watts (The maximum amount of power an electronic device, like a speaker, can handle without damage. This refers to short bursts of power, while root mean square (RMS) power handling indicates the amount of continuous power a device can sustain. Higher levels of distortion can also occur at peak power levels when the device is powered beyond its recommended usage.)
- Integrated Amplifier: false
- Audio
- Impedance: 4 ohms (Describes the resistance of an electric signal throughout the system. Devices with low impedance require less power to deliver optimal signals but are more at risk for damage from overloading. Higher impedance requires more power but is more protected from overload damage.)
- Minimum Frequency Response: 35 hertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The minimum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Maximum Frequency Response: 0.2 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Sensitivity: 90 decibels
- Efficiency: 90 decibels
- Features
- Dual Voice Coils: false
- Marine: false
- Dimensions
- Woofer Size: 12 inches
- Cutout Diameter: 11 inches
- Mount Depth: 6 inches
- Product Height: 12.2 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 12.2 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 12.2 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Product Weight: 8.38 pounds (The out of box weight of the item.)
- Other
- UPC: 050036353816
Only at Best Buy
Keep the music thumping during your commute with this JBL subwoofer. It can handle 250W of power with a peak of 1000W for booming sounds, and it reproduces a frequency range of 35Hz - 200kHz to capture extreme bass output. This JBL subwoofer is just 6.0625 inches deep for placement in tight places.
Geek Squad® Installation Recommended
Visit your local Best Buy store for more information.
- Handles up to 1000W peak power (250W RMS): For rich sound.
- 35 - 200Hz frequency response: For accurate sound reproduction.
- 90dB sensitivity: Picks up the highs and lows for faithful sound reproduction.
- 11" mounting diameter; 6" mounting depth: For a proper fit.
- 12" passive subwoofer: Delivers authoritative bass.
- 4 ohms impedance: Conducts power to keep speakers working at optimal levels.
Whats Included
- JBL GX Series 12" Single-Voice-Coil 4-Ohm Subwoofer
- Owner's manual
Q: What is the peak power handling of this subwoofer?
A: This subwoofer can handle up to 1000W peak power.
Q: What is the frequency response range of the JBL GX1200 subwoofer?
A: This subwoofer has a frequency response of 35Hz to 200Hz.
Q: How much does this subwoofer weigh?
A: This subwoofer weighs 8.38 pounds.
Q: What is the impedance of this subwoofer?
A: This subwoofer has an impedance of 4 ohms.
Q: What is the RMS power handling of this subwoofer?
A: The RMS power handling of this subwoofer is 250W.
Q: Whats the difference between this and the cx series
A: There is no difference except the dust cap, all the specs are exactly same. The 12 inch GX, CX and CS share the same specs, just different model numbers from JBL Harman.
Q: What kind of amp would I need if I am running two of these in my car. .
A: Any decent 600 watt car amp should drive two of these easily. But if need more headroom, go with a 1000 watt car amp. There are plenty of either of those around for less than $100. Use a separate amp to drive your front speakers and/or tweeters.
A: Some ppl would tell u to go with a 250 rms Amp that's 1000 peak watts but u don't want to max out your Amp in order to drive the sub because you will have distortion after the gain gets set past around 85%. Go with one that's slightly over recommendations so to answer your question I'd personally would get a 300-350 rms Amp remember to allow time for the sub to get broke in properly otherwise u run risk of not getting the most outta your subs. Also don't pay attention to max/peak watts focus on the RMS.
