Kenwood - KAC 1000W Class D Digital Mono MOSFET Amplifier with Variable Low-Pass Crossover - Black/Dark silver
This item is no longer available in new condition.
See similar items below.
Description
Features
1000W total power
RMS rating of 500W x 1 @ 2 ohms, 20 - 200 Hz, for robust audio.
Variable low-pass-filter crossover
Lets you easily adjust the audio frequency from 50 Hz to 200 Hz for flexible sonic customization.
4 ohms impedance
Conducts power evenly to keep the speaker at an appropriate level.
0.5% THD (Total Harmonic Distortion)
Provides clean sound.
100dB signal-to-noise ratio
Offers crisp audio.
0-18dB bass boost
Lets you add punchy bass to your music.
MOSFET power supply
Delivers efficient performance.
1-channel output
Allows easy system expansion.
Class D circuitry
Ensures reliable power handling.
What's Included
- Kenwood KAC 1000W Class D Digital Mono MOSFET Amplifier with Variable Low-Pass Crossover
Key Specs
- Voice Assistant Built-inNo
- Continuous Watts x Channel @ Ohms300 W x 1 x 4 Ohms; 500 W x 1 x 2 Ohms
- Amplifier ClassD
- Number Of Channels1
- Bass BoostVariable
- BridgeableNo
- Low-Pass CrossoverVariable
- High-Pass CrossoverNone
- Speaker-Level InputsYes
Compatibility
- Voice Assistant Built-inNo
General
- Product NameKAC 1000W Class D Digital Mono MOSFET Amplifier with Variable Low-Pass Crossover
- BrandKenwood
- Mounting Hardware IncludedYes
- Model NumberKAC-501
- SeriesConcert
- ColorBlack/Dark silver
- Color CategoryBlack
Audio Power
- Continuous Watts x Channel @ Ohms300 W x 1 x 4 Ohms; 500 W x 1 x 2 Ohms
- Total Power Handling RMS500 watts
- Watts Per Channel RMS500 watts
- Total Power Handling Maximum1000 watts
- Watts Per Channel Maximum1000 watts
- Amplifier ClassD
Audio
- Number Of Channels1
- Minimum Frequency Response20 hertz
- Maximum Frequency Response0.2 kilohertz
- Total Harmonic Distortion1 percent
- Signal-to-Noise Ratio (SNR)100 decibels
- Bass BoostVariable
Features
- BridgeableNo
- Low-Pass CrossoverVariable
- High-Pass CrossoverNone
- MOSFET Power SupplyYes
- Bluetooth EnabledNo
- Remote Control IncludedNo
- MarineNo
- Fan CooledNo
Input
- Line-Level InputsYes
- Speaker-Level InputsYes
Output
- Preamp OutputsNo
Dimension
- Product Height2.2 inches
- Product Width6.7 inches
- Product Depth7.4 inches
- Product Weight3.31 pounds
Warranty
- Manufacturer's Warranty - Parts1 year
- Manufacturer's Warranty - Labor1 year
Other
- UPC019048216618
Customer reviews
Rating 4.6 out of 5 stars with 128 reviews
(128 customer reviews)to a friend
Rated 4 out of 5 stars
Great for my 2 12s pushin 250rms at 2ohms
||Posted .Nice for 2 10" subs or 2 low rms 12" subs!! No fan so don't over load it sometimes gets a bit hot! But im pushing the max power for sure. Its a solid amp for the price!!
I would recommend this to a friendRated 5 out of 5 stars
Big things in a small package
Posted .I wanted to give it 3 stars because I brought an open box with hardware BUT after getting screws THIS THING ROCKS my lil truck , at first I was disappointed by the size BUT I'm convinced
I would recommend this to a friendFeatures
Value5 out of 5Quality5 out of 5Ease of Use5 out of 5Rated 5 out of 5 stars
Great amp. Small footprint
||Posted .Owned for 11 months when reviewed.Great little amp. Amplifier has a small footprint. Running two kicker 8 inch subs at 2 ohms. Drives them well, good punch. Doesn't heat up. Very happy with this amp.
Features
Value5 out of 5Quality5 out of 5Ease of Use5 out of 5I would recommend this to a friendFeatures
Value3 out of 5Quality3 out of 5Ease of Use3 out of 5Rated 4 out of 5 stars
Does it work...?
||Posted .Owned for 10 months when reviewed.Too bad install has never been right and my whole system is jacked. I'm not getting the sound quality or volume I should and would cut out randomly with first day of installation. Been back to install department several times but although Best buy admits it's not pumping out the sound it should, they can't find the issue as to why this is...so I just get to deal with it. Do not let best buy do your install!!!
Features
Value3 out of 5Quality3 out of 5Ease of Use3 out of 5I would recommend this to a friendRated 5 out of 5 stars
Good quality, Great Price
||Posted .Had this amp running a kicker compc 10” and was pushing it to hard. Well it blew lol. Hooked up an old kenwood 10” for a week and a half, started buzzing lol. Now have it hooked to a Power Acoustic 12”. Does great. A little under powered and when run hard for more than 45 mins thermal protection kicks in and kills the power till it cools down, what a great feature. Overall nice quality for the price!!!
I would recommend this to a friendFeatures
Value5 out of 5Quality5 out of 5Ease of Use5 out of 5Rated 5 out of 5 stars
Amazing
||Posted .Owned for 1 year when reviewed.It really worked on any subwoofer sizes. Sounded good in my car with two 6" 300W subs installed at doors. It also worked great in a 12" 1200W kenwood sub. Just fine tune to your desired sound quality.
Features
Value5 out of 5Quality5 out of 5Ease of Use5 out of 5I would recommend this to a friendFeatures
Value5 out of 5Quality5 out of 5Ease of Use5 out of 5Rated 5 out of 5 stars
Great amp
||Posted .Owned for 1.5 years when reviewed.Easy hook up using high level connections . Decent amount of power running a 8inch bazooka with factory sound system
Features
Value5 out of 5Quality5 out of 5Ease of Use5 out of 5I would recommend this to a friendRated 5 out of 5 stars
Bring the Bass
||Posted .Wow is all I can say! For the money the AMP is great! Now I used to install car stereos for a living and have used some high end amps for competitive reasons but this AMP seams to be one that could hang with the big boys! Great job KENWOOD !
I would recommend this to a friend
Q: QuestionWhat is the "RMS" wattage on this amp?
Asked by BBB.
- A:Answer I believe its 300 RMS into 4 ohm speaker
Answered by ViolatorUSA
Q: QuestionWill this amp work on 1 solar baric L7 kicker 12
Asked by Champ.
- A:Answer It would work but I think this amplifier is way under powered for a Solo Baric 12". I would recommend and amp with 750 watts.
Answered by Ricky
Q: QuestionThis amp is available as a "kit" with a 12" Kenwood sub with dual 4-ohm voice coils. Using this amp, should I wire the sub in series or parallel?
Asked by Rick.
- A:Answer Connect the amp in Parallel. I also reccommend an external crossover. I have two 12” Kenwood subs connected to the Kenwood Kac-501 and it hits pretty well.
Answered by BlazinPowerz
Q: QuestionHow many channels is this KAC-501 amplifier.
Asked by Anonymous.
- A:Answer It is only 1 channel. I bought it as a spare, it works just as good as a 2 channel and for the price it's worth it. If you crank it up while running 2 subs it will heat up if vehicle is stationary and shut down until it cools off.
Answered by Sweets
Q: QuestionWill this amp work well with a JL Audio Stealthbox 2 ohm Subwoofer?
Asked by Anonymous.
- A:Answer Yes it will!!
Answered by Mia12
Q: QuestionCan a remote be added to this amp?
Asked by Lionel.
- A:Answer No. A remote cannot be added
Answered by ryanmehl
Q: QuestionThis came in a package deal with two 12" kenwood 4 ohm single coil subs is it enough?
Asked by JK.
- A:Answer Can’t speak specifically to the Kenwokd subs, but I’m pushing 2 12” Kicker CompC’s and this amp is plenty.
Answered by JTisMe
Q: QuestionI recently got 2 12 inch shallow mount kenwoods excelons in a probox for a 2012 gmc crewcab, what kenwood amp would push them to the full potential
Asked by Alamoguy.
- A:Answer I don't have the specs for your speakers. Just make sure not to overpower them with this amp
Answered by Kenwood Product Expert