A:Answer2-way means that there are separate drivers that cover all of the sounds that the speakers can reproduce. The AM-1 features a separate Tweeter for high frequencies and a MidBass driver for middle and lower frequencies. The benefit of this approach is that the drivers specialize in reproducing the range of sounds that they have been designed for rather than one driver trying to do everything. Additionally, there is a passive bass radiator that helps to fill out the bottom end for better bass.
A:AnswerThe speaker wires attach to spring loaded posts located in the base of the speaker mount . Signal passes to the speaker through the speaker mount arm where it pivots .
I would recommend a thin coating of di-electric grease to these rather large connection surfaces .
A:AnswerIn my experience, you will need an amplifier with at least 80-120w of RMS (Continuous) power per channel at an 8Ω impedance rating to get the most out of these speakers. Your speakers need to have adequate power to realize their advertised potential. Just remember if you add two of these 8Ω speakers to one channel the resistance will change to 4Ω. So if you find a two-channel amp make sure it's 4Ω stable if you plan on using 2 speakers per channel.
A:AnswerSorry, no idea, my husband installed them, they are hanging on the wall not inside. He just used the speaker wire we had with our floor speakers.
