Questions & Answers

Q: QuestionWhich Frigidaire microwave model is this trim kit compatible with?

• A:Answer This trim kit is designed for use with the Frigidaire Gallery microwave model GMBS3068AF.

Q: QuestionWhy is this trim kit required for installation?

• A:Answer This trim kit is required to install the Frigidaire Gallery 2.2 Cu. Ft. Built-In Microwave.

Q: QuestionHow much does the trim kit weigh?

• A:Answer The trim kit weighs 9 pounds.

Q: QuestionWhat is included in this trim kit for installation?

• A:Answer This trim kit includes 1 front frame assembly, 1 exhaust duct, 1 bottom mounting rail, and 6 screws for installation.

Q: QuestionWhat is the minimum clearance between the microwave rough opening and the cabinet doors above and below?

Asked 1 month ago by foodguy2.

• A:Answer Hi foodguy2! Thank you for reaching out. There is no specific minimum clearance required between the microwave rough opening and cabinet doors above or below. The microwave is designed to fit flush within the cabinet cutout and be finished with the trim frame, as long as adjacent doors or hardware do not interfere with the microwave door’s operation. If installed over a wall oven, a minimum of 3 inches of clearance between the appliances is required. For safety and to ensure the installation meets all requirements and local codes, we recommend having the unit installed by a qualified or certified installer. — Reed

  Answered 1 month ago by FrigidaireSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI need a trim kit for Frigidaire - gallery 2.2 cubic foot built in microwave. Model GMBS3068BF What trim kits will work for this model in stainless steel?

Asked 3 months ago by Chuck.

• A:Answer Hello, Chuck. Thanks for reaching out to us. Here are the trim kits that are known to work with this model: Frigidaire Gallery 30″ Stainless‑Steel Microwave Trim Kit Model GMTK3068AF - This trim kit is designed to give your microwave a finished, integrated look and includes the hardware needed for installation (front frame, exhaust duct, bottom rail, screws). Frigidaire Gallery 27″ Stainless‑Steel Microwave Trim Kit Model GMTK2768AF - Another option if your cabinet opening is narrower. This trim kit also complements the microwave and is required for a built‑in look. - Maria

  Answered 3 months ago by FrigidaireSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI need a 27" trim kit for a Frigidaire Gallery Microwave Model # GMBS3068BF. Specs from the microwave: (copy/paste specs) Compatible Trim Kit Available Yes Compatible Trim Kit Model GMTK3068AF, GMTK2768AF Which 27" trim kit works with the GMBS3068BF?

Asked 5 months ago by GaryT.

• A:Answer Hi there, thank you for your question. Frigidaire offers a **27" trim kit, model GMTK2768AF which works with GMBS3068BF. - Jessica

  Answered 5 months ago by FrigidaireSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWould this trim kit fit GMBS3068BF MODEL?

Asked 7 months ago by Kev.

• A:Answer Hi Kev, thank you for your question! The Frigidaire GMTK2768AF trim kit is designed for certain 27" microwave models. For your GMBS3068BF, this trim kit is compatible and should work properly with your unit. - Reed

  Answered 7 months ago by FrigidaireSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes this trim kit fit on model GMBS3068BF??

Asked 7 months ago by Miaa.

• A:Answer Hi! No, the Frigidaire trim kit model GMTK2768AF is designed for the Frigidaire Gallery microwave model GMBS3068AF, not the GMBS3068BF. - Patrick

  Answered 7 months ago by FrigidaireSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat size cabinet box is needed for this trim kit?

Asked 9 months ago by Leanna.

• A:Answer Hi there, our valued customer! The Frigidaire GMTK2768AF trim kit is designed for a 27-inch wide microwave and requires a cabinet opening of 27 inches wide by 18 inches high. The depth of the opening should be at least 11 1/2 inches. -Chris

  Answered 9 months ago by FrigidaireSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat are the insider dimensions of the trim kit access opening ???

Asked 10 months ago by Ike.

• A:Answer Good day, Ike! The Frigidaire Gallery 27" Stainless-Steel Microwave Trim Kit (model GMTK2768AF) is designed to provide a built-in appearance for your microwave. The interior (insider) dimensions of the trim kit, which correspond to the space available for the microwave, are approximately: Height: 13 5/8 inches Width: 24 7/16 inches These dimensions are based on information provided by Frigidaire Support. It's important to note that these measurements refer to the opening within the trim kit where the microwave fits. For the trim kit's external dimensions, which affect the required cutout size in your cabinetry, they are approximately: Height: 18 inches Width: 27 inches Depth: 1 5/8 inches These external dimensions are consistent with the specifications provided by Frigidaire. - Maico

  Answered 10 months ago by FrigidaireSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes the Frigidaire - 27'' Microwave Trim Kit - Model: GMTK2768AFSKU: 6521584 Come in black?

Asked 1 year ago by Lisa.

• A:Answer Hello Lisa, This Trim kit model GMTK2768AF is only available in stainless steel color. ~Sam

  Answered 1 year ago by FrigidaireSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: Questionmicrowave with trim kit for upper kitchen 12' depth cabinet

Asked 1 year ago by heyu.

Q: QuestionI want to but the Microwave PMBS3080AF but I have a cabinet 27" wide. I cannot use trim kit PMTK3080AF which is 30" wide. what is the opening for GMTK2768AF. Fridgedaire has not answered the questions yet.

Asked 1 year ago by Anonymous.

• A:Answer I used my old trim kit and returned the new one. my old one fit perfectly.

  Answered 1 year ago by AlejandroCVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionDoes the Trim Kit allow for venting to the outside?

Asked 3 years ago by Sassy.

• A:Answer Hello Sassy! Definitely not. With the provided 2-sided tape, apply the Trim Kit's low-profile venting kit to the microwave's top and sides. This vents the air out of the top and sides once it is mounted. We sincerely hope that this knowledge benefited you and your buying endeavors. -Christian

  Answered 3 years ago by FrigidaireSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI need the 27" trim kit in Stainless or some close match for a PMBS3080AF. Where can I find one? I am replacing a GE Profile of about same dimensions

Asked 2 years ago by TrimKitforPMBS3080AF.

• A:Answer Hello, TrimKitforPMBS3080AF. We appreciate your inquiry. The only trim kit available for model PMBS3080AF is PMTK3080AF. Kindly refer to your local dealer if they have other options for you. We hope this information helps! - Christi

  Answered 1 year ago by FrigidaireSupport

  
  Helpful (0)Unhelpful (1)ReportAnswer this question

Q: QuestionDoes this 27 inch trim kit work for your Professional model PMB3080AF. My opening is perfect.

Asked 2 years ago by pnibur106.

• A:Answer Thanks for reaching out, Pnibur106! The compatible optional trim kit for model PMB3080AF is PMTK3080AF. We hope this information help you and your shopping experience.-Angel

  Answered 2 years ago by FrigidaireSupport

  
  Helpful (0)Unhelpful (1)ReportAnswer this question

Q: QuestionWhat are the inside dimensions of the Frigidaire Trim Kit’s opening on Model GMTK2768RAF. Also can the GMBS3068AF microwave be built in since the trim kit covering the microwave does not have openings.

Asked 3 years ago by Sassy.

• A:Answer Hi Sassy! Thank you for reaching out to us. The dimensions and volume of the trim kit are: height 18", width 30", and depth 1 5/8". We recommend having a professional installer perform the installation. We hope this information was helpful to you and your shopping experience. Christian

  Answered 3 years ago by FrigidaireSupport

  
  Helpful (0)Unhelpful (3)ReportAnswer this question

Q: Questionwhat size opening does this trim kit fit? What are the outside dimensions of this trim kit?

Asked 3 years ago by Max.

• A:Answer Thanks for reaching out to us, Max! You are able to use the 27 Inch Stainless-Steel Microwave Trim Kit with your Frigidaire 2.2 CU. Ft. Built-In Microwave, and the dimensions are listed as follows: Height: 18", Width: 27", and Depth: 1 5/8". We hope this information was helpful to you and your shopping experience. -Ciara

  Answered 3 years ago by FrigidaireSupport

  
  Helpful (0)Unhelpful (3)ReportAnswer this question