A:AnswerHi Meme- Thanks for your purchase! We suggest to view the Quick Specs at the following link to view the vent location: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=gud24essj_24gssj_c3.pdf - Thanks for checking with us! SUE@GEA
A:AnswerIt uses one plug, I think it comes in both 110 and 240, if you do the 240 be sure to get the configuration of the plug as there are several available
A:AnswerHi Don2764- This is Sue at GE Appliances. Thanks for choosing our GE UNITIZED SPACEMAKER® 2.0 DOE CU. FT. WASHER AND 4.4 CU. FT. ELECTRIC DRYER GUD24ESSJWW! We are happy to provide assistance. Insert free end of drain hose into drain opening of your home up to drain hose stopper (do not remove hose stopper it prevents siphoning). If water valves and drain are built into wall, fasten drain hose to one of water hoses with cable tie provided (ribbed side of inside). If your drain is a standpipe, fasten drain hose to standpipe with cable tie provided. We suggest to view page 10 of the Installation Instructions at the following link or visit: http://products.geappliances.com/appliance/gea-support-search-content?contentId=18682 - We hope this is helpful. Keep in touch at 1-800-626-2005 or visit our Contact Us page: http://www.geappliances.com/ge/service-and-support/contact.htm?icid=GEARtopnav-contact - Thanks for checking with us!
A:AnswerHi Lauren- This is Sue at GE Appliances. Thanks for viewing! This appliance should be connected to an individual, properly-grounded branch circuit with 120/240V single-phase 60 Hz electrical service and should be protected by 30-amp time-delay fuses or circuit breakers (The figure 120/240 simply means one side of the 240 line operates the motor and 240 operates the heaters). Any appliance that is rated for 240 volts and can also be used on a 220V or 208V outlet. We encourage you to view the Installation Instructions at the following link: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=gud24essj_24gssj_c3.pdf - Thanks for checking with us!
A:AnswerHi Lauren- This is Sue at GE Appliances. Thanks for viewing! This appliance should be connected to an individual, properly-grounded branch circuit with 120/240V single-phase 60 Hz electrical
service and should be protected by 30-amp time-delay fuses or circuit breakers (The figure 120/240 simply means one side of the 240 line operates the motor and 240 operates the heaters). Any appliance that is rated for 240 volts and can also be used on a 220V or 208V outlet. We encourage you to view the Installation Instructions at the following link: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=gud24essj_24gssj_c3.pdf - Thanks for checking with us!
A:AnswerHi Voltage- This is Sue at GE Appliances. Thanks for viewing! A 208V or 240V , 30 Amp Circuit is required. We currently do not offer a Unitized model that operates at 120V. We suggest to view our GE SPACE-SAVING 2.6 DOE CU. FT. CAPACITY STATIONARY WASHER WITH STAINLESS STEEL BASKET WSLS1500HWW and GE SPACEMAKER® 120V 3.6 CU. FT. CAPACITY STATIONARY ELECTRIC DRYER DSKS333ECWW. You will also need Optional Stacking Kit DSDR24F. You can view a photo of the units stacked with kit at the following link: http://www.bestbuy.com/site/ge-spacemaker-laundry-stack-rack/7177896.p?id=1149204924125&skuId=7177896 - We hope this option works for you. Keep in touch at GEAppliances.com!
A:AnswerHi SK, I am happy to help. The washer and dryer are a one piece unit and cannot be separated. I suggest contacting service below:
GE Appliance Service
1-800-GECares (1-800-432-2737)
Monday - Friday: 7 a.m. - 10 p.m. ET
Saturday - Sunday: 8 a.m. - 6 p.m. ET
I hope this helps. Thank you for checking with us.
Lisa from GE Appliances.
A:AnswerHi Kel- This is Sue at GE Appliances. Thanks for your purchase! The motor will speed up incrementally during the spin cycle. When spin is complete, it will coast until it stops. Motor “whining up” or ”coasting down” in spin is normal. Make sure the washer is level. The more the legs are extended, the shakier the washer will be during operation. Also, unbalanced loads can cause the washer to vibrate more. Stop the machine and redistribute the load. We encourage you to view the normal operating sounds you may hear in the Owner's Manual included with the unit or online at the following link: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-90532.pdf - Any other sounds may require a technician for diagnosis. You can contact GE Consumer Service at 1-800-432-2737 for assistance or conveniently schedule an appointment online: http://www.geappliances.com/service_and_support/service/ - We hope this is helpful. Thanks for reaching out to us!
A:AnswerHi Miashopper- This is Sue at GE Appliances. Thanks for your interest! 27.325" is the overall depth including the vent connection on the rear of the dryer. We encourage you to view the Installation Instructions for complete dimensions and clearances (depending on closet, alcove, etc) at the following link: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=31-16728.pdf - Thanks for checking with us!
A:AnswerHello Patti,
I am happy to help. GE Appliances and I am happy to help you. This washer has a 2.2 cubic foot capacity. Your washer is limited by the volume of clothes that can be put in the machine. For example, a down comforter can fill the entire machine but weigh very little, while blue jeans are heavy but typically a smaller load. Make sure to load the clothing loosely. As long as the clothing fits below the balance ring of the washer tub and is not stuffed in the tub tightly it will wash fine.
Thanks for checking with us! Lisa from GE Appliances.
A:AnswerHello Tom - this is Nancy at GE Appliances and am happy to help you. Minimum clearance to combustible surfaces and for air openings are: 0" clearance on both sides and in the rear. Consideration must be given to provide adequate clearance for installation and service. The washer basket is plastic and the dryer drum is a painted steel. I hope this helps! Thanks for checking with us!
A:AnswerHi SharoninSimi- This is Sue at GE Appliances. Yes, the power rating are: Volts/Hertz 120/240V or 120/208V; 60Hz; Circuit Breaker or Time Delay Fuse-30 Amp. Check out the Installation Instructions online: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=31-16728.pdf - Thanks for checking with us!
