A:AnswerNo. High noise level when operating. If you want one that is less noisy, you probably have to go up in purchase price to a much more expensive model.
A:AnswerI had to unplug mine after about every 20 sheets, lift the top off the basket and get pliers out to pull out all of the jammed paper in the shredding gears. It ran fine after I did that each time but it was extremely time consuming.
A:AnswerNo. After the bin fills 3 times after shredding one paper at a time. It shuts off for about 30 to 45 minutes. I shredded 16 80 lb bags and the shredders still work great.
A:Answeri have shredded boxes full of papers , haven't had a problem......i think the most important thing is not let it overfill ...i like the see thru plastic....lets u see when its almost full...
A:AnswerThere may be cut paper or paper dust in the sensor that triggers when paper is inserted. A can of compressed air or a vacuum might help to clear that.
A lot of the sensors are optical and cut paper/paper dust can cover them. If a mechanical sensor, then the shredded paper can sometimes hold the sensor where it thinks there is paper inserted.
A:AnswerTry putting the shredder in reverse and the in forward mode to reset the machine. Also try turning it off, unplugging it, turning it back on and then putting it bac in forward/shred mode. Perhaps that will allow it to work again.
