Questions & Answers

Q: QuestionWhat is the maximum weight a TV can be for this mount?

• A:Answer The maximum weight limit for this mount is 100 lbs.

Q: QuestionDoes this mount come with hardware for installation?

• A:Answer Yes, this mount includes hardware for installation.

Q: QuestionDoes this mount help with cable management?

• A:Answer Yes, this mount has an integrated cable management system to keep cords organized.

Q: QuestionCan I tilt and swivel my TV with this mount?

• A:Answer Yes, you can tilt your TV +10° to -5° and swivel it 135° left or right.

Q: QuestionHow far can this mount extend from the wall?

• A:Answer This mount can extend between 3.1 inches and 26 inches from the wall.

Q: QuestionWhen fully extended, will I be able to swivel a 50" TV to 90 degrees from the wall with this mount.?

Asked 8 years ago by Wriken.

• A:Answer Don't think so. My TV is 49 inches and it doesn't quite get to 90 degrees. It looks like it gets to about 2-3 inches shy.

  Answered 8 years ago by TinEarVerified Purchase

  Helpful (7)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: Questionwill this work with 24in studs?

Asked 9 years ago by lisa.

• A:Answer Lisa, The FMC4 is designed to work with both 16 and 24" stud spacings. If you have any other questions please feel free to contact us directly using the support button on our website and we'll be happy to help.

  Answered 9 years ago by Kanto Living

  
  Helpful (6)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes this Kanto wall mount kit include the 4 screws compatible to screw into the mount holes on the back of my TV? Although my TV is less than a year old, I don't recall if the mounting screws came with it. (Samsung UN43NU7100)

Asked 6 years ago by lsa196.

• A:Answer Yes it comes with different sizes of screws. However on my LG tv I had to use longer screws and washers on the bottom of the tv because of differences in the back of the tv.

  Answered 6 years ago by MikeVerified Purchase

  Helpful (3)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: Questionwhat is the width and height of the mounting brackert

Asked 9 years ago by T3acher.

• A:Answer The mount is 17.7 inches high and 26.8 inches wide.

  Answered 9 years ago by CommunityAnswer

  Helpful (3)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWill this fit my 55 in curved TV

Asked 9 years ago by Andy.

• A:Answer Andy, Most curved TV's do not mount any differently than standard flat TV's so you shouldn't run into any issues as long as your TV is under the weight capacity and has a compatible VESA pattern (bolt pattern). To confirm compatibility between our mount and your TV I would suggest contacting us at [email protected] with your TV's full model number. Hope to hear from you, thanks.

  Answered 9 years ago by Kanto Living

  
  Helpful (3)Unhelpful (0)ReportAnswer this question

Q: QuestionI'm trying to mount a tv perpendicular to the wall, I was wondering what the max size tv this mount can accommodate for being perpendicular to the wall.

Asked 7 years ago by Trevor.

• A:Answer I have a 49" TV that measures 42 7/8" (109cm) in width. If I pull the mount perpendicular to the wall and slide the TV to the furthest position on the mount I have about 6" (15cm) clearance from the wall. I would estimate that a TV that is 53" or less in width should fit with some room for adjustments.

  Answered 7 years ago by EggbertVerified Purchase

  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionModel number Pn50b450b1dxza Does this mount fit my Samsung tv?

Asked 7 years ago by Sergio.

• A:Answer Sergio, Your TV has a compatible 400x400 VESA pattern (bolt pattern) and is under the weight capacity of the FMC4 so it should work. Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.

  Answered 7 years ago by Kanto Living

  
  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionWhat is the depth of the mount when pushed back to the wall as close as possible?

Asked 3 years ago by MaryB.

• A:Answer Hi Mary, the depth of the wall mount from the back of the TV brackets to the wall is only 3.1".

  Answered 3 years ago by Kanto Living

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionI have a Samsung 40” model UN40H5003AFXZA. Will the fmc4 mount allow me to view at the 135 degree angle? And does the tilt work on the fly meaning can you adjust it throughout the day or is it meant to be set and tightened with a screw or bolt?

Asked 5 years ago by rlehs.

• A:Answer Your TV has a compatible VESA pattern of 200mm x 200mm and is under the weight limit of 100 lb. With your TV size you should be able to swivel your TV around 120-135 degrees. To keep the angle of your TV constant, you need to tighten the bolts on the mount. If you have any other questions or require additional information, if you could please email us directly at [email protected] and we would be happy to help.

  Answered 5 years ago by Kanto Living

  
  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionI have a 55 inch Samsung that I'd like to mount in a corner. I want the TV to be flush with the corner cabinet that is underneath. Measuring from the corner straight out to the edge of the cabinet is 32 inches. Is the ARM long enough?

Asked 6 years ago by ZMan.

• A:Answer ZMan, As long as you don't install the mount directly in the corner you should have enough extension. Install the mount one stud spacing away from the corner for better maneuverability. Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.

  Answered 6 years ago by Kanto Living

  
  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWill this work with a LG 50PA6500 or a Panasonic TC-P50X1?

Asked 6 years ago by John.

• A:Answer John, Both TVs have compatible VESA patterns and are under the weight capacity of the FMC4 so either will work on this mount. Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.

  Answered 6 years ago by Kanto Living

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work with a 49" LG 49UJ6500?

Asked 8 years ago by Kerri.

• A:Answer Kerri, Your TV has a compatible 300x300 VESA pattern (bolt pattern) and is under the weight capacity of the FMC4, should work well! Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.

  Answered 8 years ago by Kanto Living

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: Questionhi, will your mount work with my older TV, a Sony Model No. KDL-32BX330 (35.5 in diameter, 19.5 in ht, 30 in long)? thanks!

Asked 8 years ago by Anonymous.

• A:Answer The KDL-32BX330 has a compatible 200x300 boll pattern and is under the weight capacity of the FMC4, should work well! Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.

  Answered 8 years ago by Kanto Living

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionI put this up but it doesn't tilt down or up. What am I doing wrong?

Asked 8 years ago by Tilt.

• A:Answer Hi, You will loosen the tilt bolts on both sides of the mount plate using the included Allen Key, this is shown in step 5 of the manual. If you have any other questions, or need additional help, please email us directly at [email protected] and we'll be happy to help.

  Answered 8 years ago by Kanto Living

  
  Helpful (1)Unhelpful (0)ReportAnswer this question