A:AnswerHi Mark,
Sorry for the confusion on the TV sizes. What really matters is your TV's weight and VESA (mounting) pattern. The Sony model you are referencing will fit perfectly with the BLL2.
Kathryn @SANUS
A:AnswerIf I understand what u are say the answer is no. The way this is setup is it's flush to the wall. The locks hold it into place they are really design to hold a TV, just keep it from moving. This mount is designed for 180 degree viewing angel and flush to the wall
A:AnswerHi There
Yes this will work with your Sony! Feel free to check out our selection assistant here http://mf1.bestbuy.selectionassistant.com/ for a full list of all mounts that will work with your TV.
Kathryn @SANUS
A:AnswerTo a degree. It all depends on the size of your TV and how much of the frame you are willing to see if you don't mount it right the first time. The bigger the TV, the more flexibility you have.
A:AnswerHello,
This mount sits about 0.67" from the wall with just the TV installed.
The distance with a soundbar attached depends on which soundbar mount you use. If you’re using a wall-mounted soundbar bracket, it will not affect the TV’s distance from the wall.
SANUS Support
A:AnswerHi Myname1431,
No — this mount is not designed for portrait (vertical) TV orientation, and we do not recommend using it that way. It’s meant to securely hold a TV in the standard horizontal orientation only.
If you need a mounting solution that supports portrait installation, feel free to reach out to [email protected]
or 1-800-359-5520 and we can help suggest the right option.
Thanks,
SANUS Support
A:AnswerHi JB,
Yes — this mount will work with a Samsung 75″ Q8F QLED TV. Your TV size (75″), weight, and typical VESA pattern fall within the supported range for this model.
If you need help confirming exact measurements or installation tips, feel free to reach out to [email protected]
or 1-800-359-5520.
Thanks,
SANUS Support
A:AnswerHi Mike,
Yes — this mount will work with your Samsung 50” Class U8000F. Since your TV uses a 200 × 200 mm VESA pattern, it falls well within the supported range for this mount, and its size (50") and typical weight are also within the mount’s limits.
If you need help with installation tips or double-checking specific measurements, feel free to reach out to us at [email protected]
or 1-800-359-5520.
Thanks,
SANUS Support
A:AnswerHi Bob,
No — this mount will not work for a 95-inch TV, even though your TV weighs 115 lbs. This model is designed for TVs up to 80 inches, and a 95-inch screen falls outside the supported size range, so it wouldn’t be a safe or compatible option.
If you’d like help finding a SANUS mount that’s designed for a 95-inch TV, feel free to reach out to us at [email protected]
or 1-800-359-5520, and we’ll be happy to help.
Thanks,
SANUS Support
A:AnswerHi Sunny,
Sorry for the confusion here — you did not receive a faulty product. The wall plate on this model is 26" wide.
It looks like the Best Buy product listing is showing an incorrect width. We appreciate you flagging that, and we’ll work with the retailer to get the listing corrected.
SANUS Support
A:AnswerHello,
Thanks for your question. The SANUS Elite Super Slim Fixed-Position TV Wall Mount is engineered to be installed into wood studs, solid concrete, or concrete block for safe and secure support. Because of how brick is structured, we do not recommend mounting this model directly into a brick wall without proper reinforcement.
If you’re planning to install on brick, you’ll need to ensure the mount is anchored into a solid structural surface such as concrete behind the brick or use appropriate blocking installed between studs. Simply drilling into the brick itself is not considered a secure method for supporting the weight of a TV mount and TV.
If you’d like guidance on your specific wall construction or ideas for safe mounting solutions, feel free to reach out to us at [email protected]
or call 1-800-359-5520.
Thanks,
SANUS Support
A:AnswerHello Mick,
No, this mount is not designed for 32-inch stud spacing. The wall plate is about 26 inches wide, so it supports installation on wood studs spaced up to 24 inches on center.
If you have any other questions, feel free to reach out to us at [email protected]
or call 1-800-359-5520.
Thanks,
SANUS Support
A:AnswerHello,
Even though the wall plate may look wide enough, this mount is not recommended for an 85" TV. The SANUS Elite Super Slim Fixed-Position TV Wall Mount is designed and rated for TVs 32"–80", so an 85" TCL TV falls outside of the supported screen size range.
For safety and proper support, we recommend using a mount that is specifically rated for an 85" TV.
If you’d like help finding a compatible SANUS option, feel free to reach out to us at [email protected]
or call 1-800-359-5520.
Thanks,
SANUS Support
A:AnswerHello, This mount is designed for TVs up 80" so it will not be compatible with the 85" Samsung Frame. If you have any other questions, feel free to reach out to our team at [email protected] or 1-800-359-5520. We’re happy to help. Thanks, SANUS Support
A:AnswerHello,
The SANUS Elite Super Slim Fixed-Position Mount is designed to hold your TV close to the wall, so accessing ports directly on the back of the TV (like USB or HDMI) can be a little tight. Here are a few options that can help:
Use the Easy Release Cords: Pulling the release cords on the bottom of the mount lets the TV tilt outward from the wall. This gives you some space to reach the ports without fully removing the TV.
Right-Angle or Extension Adapters: If your USB port is difficult to reach, a right-angle adapter or a short USB extension cable can make connecting devices much easier.
Pre-connect Cables: If you know you’ll need frequent access, plug in an extension cable while installing the mount so you don’t have to reach directly behind the TV each time.
If you’d like guidance on adapters or best installation practices for cable access, feel free to reach out to us at [email protected]
or call 1-800-359-5520.
Thanks,
SANUS Support
