A:AnswerIt should. Its compatible with Tvs up to 65 inch and includes an assortment of mounting screws to find the right width and depth for your particular model. It works fine with my samsung tv.
A:AnswerThis stand is advertised for a 60lb TV. If it was like a 65lb TV I’d say yes but I would look for something closer to your TV’s weight and not take the risk in damaging your TV.
A:AnswerThe Tv will not protrude past the depth of base, unless you use to angle your tv a certain direction, in which case the amount it hangs over will depend of the width of the tv.
A:AnswerShould work as long as the TV has a compatible VESA pattern in the range of 100x100mm-600x400mm, is under 60" and under 60lbs.
Thanks,
- Haydn @ SANUS
A:AnswerIt depends on how you mount it on the TV.
It's intended to allow a sound bar below the TV on the stand.
Mine is currently at 5 and a half inches from the TV bottom to the base.
A:AnswerIt is a great television stand and I highly recommend it! It is only rated for televisions up to 65 in but as long as it doesn't exceed the weight limit I don't see why it wouldn't work! I would also add, The Geek Squad people refuse to mount it on my 65 in Samsung TV so I ended up using the stand that came with the television.
A:AnswerYes, that’s what I mounted too it. Very solid, very adjustable and the swivel is smooth. All needed hardware is included. Took me about a hour to assemble it. Nice stand.
A:AnswerMy tv from best buy was set up by the geek squad ! What I know of the base is it can't be fully adjusted to my sound bar as it leaves a gap ! It also sags under the weight of my 55 inch OLED tv ! If I could change this piece of equipment I would !!!
A:AnswerWe just installed it on our Sony Bravia X90J 55" LED TV. The package comes with lots of bolts to accommodate different TVs. The trick is to figure out which set of bolts your TV needs. The Sony wall-mount instructions helped somewhat, but we had to try a few different ones to find the right fit. You definitely need two people to do the set up. It took my daughter and her boyfriend about an hour. It's a great stand, so it was worth the effort.
A:AnswerI put it on a 15-1/2" deep stand and it is fine. I'm hanging over the back almost 2" cause I chose not to have it placed at the front edge of my console. I feel it is very well balanced, the weight is distributed back to front. The part in back is just part of the center support, not key in the mounting part.