A:AnswerHi eric20920,
Thank you for the interest! We recommend connecting wired speakers with a nominal impedance of 6 ohms to 16 ohms. We also recommend using speaker wires that are anywhere between 12 to 16 gauge. These are most commonly used for connecting speakers to an amplifier or an Audio/Video (A/V) receiver.
Regards,
David
A:Answernot sure but I have a sony subwoofer which comes with a specific plug not a speaker wire that comes with a specific plug that attaches to the receiver
A:AnswerHi FIDELITY21,
Yes, this AV receiver has a coaxial port. You can connect this AV receiver to your TV using analog audio jacks and a coaxial digital audio jack. See page 24 for details.
https://www.sony.com/electronics/support/res/manuals/4726/55cd375e0f9e7103f2b6baa747ed9072/47269061M.pdf
Regards,
David
A:AnswerHi Kb10,
We do apologize for the inconvenience. The AV receiver only supports 4K/60p.
Please be assured we take this feedback very seriously and continuously strive to improve our products.
Regards,
David
A:AnswerThere are RCA inputs, but none that are labeled for Phono. It is my understanding that the only way an old turntable would work is if it has a pre-amp. If the turntable has it's own speakers, it probably has a built-in preamp. Not all turntables will work with it unless you add some type of amp between them.
A:AnswerHi Customer,
You cannot connect a turntable with this AV receiver. We recommend connecting wired speakers with a nominal impedance of 6 ohms to 16 ohms. We also recommend using speaker wires that are anywhere between 12 to 16 gauge. These are most commonly used for connecting speakers to an amplifier or an Audio/Video (A/V) receiver. If you need further assistance, please contact our chat support team.
https://us.esupport.sony.com/support/s/support-contact
Regards,
David
A:AnswerHi MNCC,
You can only connect one subwoofer to this AV receiver using a subwoofer cable. We also recommend connecting speakers with a nominal impedance of 6 ohms to 16 ohms.
Regards,
David
A:AnswerYes you can use wired speakers. In fact, only the subwoofer requires a cable. I have front, center and surround speakers hooked to mine and they're all wired. Hope this helps.
A:AnswerHi Martin, Thank you for your interest in the STRDH590. The Reference power output for the front, center, and surround speakers is 145 W per channel. Hope this helps! -Sam
A:AnswerHi xfinityxr11, Thank you for your inquiry! Using a third-party remote control is not recommend as we cannot gurantee its full operation. I would recommend contacting your remote control manufacturer for further assistance. Hope this helps! -Sam
A:AnswerHi JimD, Thank you for your interest in the STRDH590. Yes, you can hook up your turntable, CD player, and BD/DVD player to this receiver. This unit is equipped with 4 HDMI inputs and 4 RCA audio inputs so you can connect multiple devices. However, there is no option for additional 2 outdoor speakers since this is a 5.2 channel AV receiver only. If you're looking for an AV receiver with multi zone feature, I'd recommend checking out the STRDN1080 model. Hope this helps! -Sam
A:AnswerHi anmi, Thank you for your interest in the STRDH590. You can connect your projector to this receiver via HDMI ARC input even though your projector doesn't support HDMI ARC. Using an HDMI splitter is not recommended as we cannot guarantee its operation. I would suggest to directly connect your Roku device to one of the HDMI input of the receiver and connect regular speakers to the speaker ports of the receiver. You may refer to your HDMI splitter manufacturer for further assistance with compatibility with our unit. Hope this helps! -Sam
A:AnswerHi Anmi, Thank you for your inquiry. You can connect your projector to this receiver via HDMI ARC input even though your projector doesn't support HDMI ARC. Unfortunately, you cannot connect your soundbar to the receiver for audio. I would suggest connecting speakers to the speaker ports of the receiver to get audio from your projector. Hope this helps! -Sam
A:AnswerHi Mark, Thank you for your inquiry. Unfortunately, Only an active subwoofer can be connected to the SUBWOOFER OUT of this receiver, and you can only connect the subwoofer via RCA cable connection. Hope this helps! -Sam
