A:AnswerThis product is a hub or splitter. It takes one usb 3.0 and makes that one a multi. If your machine doesn't have a USB 3.0 port I don't believe this is what you are looking for. I would look at a USB 3.0 card to install in the computer. Hope this helps.
A:AnswerYes, there is a cord connecting the device to your computer's USB socket. I just did a rough measurement (still plugged in) and it's about 39 to 40 inches.
A:AnswerThe ST7300USB3B is a 7 Port USB hub. With the power adapter connected to the ST7300USB3B, all 7 USB ports is capable of outputting 900mA as per USB 3.0 specification. Atha, StarTech.com Support
A:AnswerThe ST7300USB3B is operating system independent which means it is supported in any operating system including Windows 11. Brandon, StarTech.com Support
A:AnswerYou can use a USB-C to USB-A adapter/cable to connect the scanner directly to the MacBook or to connect the USB hub to the MacBook. Something like our USB31CAADP. Brandon, StarTech.com Support
A:AnswerThe ST7300USB3B is a 7 Port USB 3.0 hub. As long as the connecting device supports being used with a USB 3.0 hub, the ST7300USB3B will work. Atha, StarTech.com Support
A:AnswerI am not sure about the head set. With the external hard drives and thumb drives yes. I have used Samsung external and WD with out any problems. When i tried to use the external hard drives without plugging it in. I couldn't run the hard drives as soon as i plugged in the power source everything worked smoothly and has been.
A:AnswerThis is a single USB cable from switch to computer. Make sure you are plugging into a 3.0 USB port on the computer, other wise the switch will revert back to 2.0 USB standard. If plugging switch into 3.0 USB port on computer it will give you 7 more 3.0 USB ports.
A:AnswerNone at all. I've been using this hub for months. Continuously connecting and disconnecting drives. I haven't had any problems with data loss or connection issues. This is a well made, solid hub. Worth buying.
A:AnswerThe ST7300USB3B is a USB 3.0 (5Gbps) hub. The ST7300USB3B will share its bandwidth (5Gbps) across the USB devices attached to the hub. Furthermore, the ST7300USB3B is powered using a power supply so all of the USB ports on the hub will support 5V / 900mA. Atha, StarTech.com Support