A:AnswerHello Scooter, All Thinkware Dash Cams are designed for use inside of the vehicle. None of our Dash Cam contains an Internal Battery and need a constant source of power to function.
A:AnswerHello There, you can also set the Dash Cam for Motion Detection. In this mode, the Dash Cam will be detecting and saving the video for any Motion or Impacts that happen to your vehicle.
A:AnswerHello There, unfortunately, the F70 model does not offer any Wi-Fi connection to the app, All videos are stored in the memory card and can be viewed through a computer.
A:AnswerHi There, no, the F70 is handled to design up to 140 to 160F degrees. With its built-in Thermal Protection, if the Dash Cam gets too hot to operate, it will announce that it's shutting down due to the temperature, in order to avoid damage.
A:AnswerHello Kathy, The Device will power up and say "Continuous Recording will now start" to inform you the device is recording. If there is any issues the device will have audible alerts informing you of the issue.
A:AnswerI have one and live in New Mexico. It handles heat just fine although I have a white car and when parked I use windshield shades so the camera is on the interior side of the shade.
A:AnswerHi David,
If you are using a 64GB MicroSd this will record footage for 496mins (approximately 8 hours)
Kind Regards, Thinkware Customer Support
A:AnswerHello, We do sell in the entire USA and in fact, we have authorized dealers and installers in New Jersey. Please reach out to us via email or phone call at [email protected] or 1 (844) 865-9273 so we can assist you further.
A:AnswerNo, it is intended as a front-facing dashcam only. You might be able to hook it up facing the rear to record what happens behind you, but you wouldn't be able to use it when you're backing up your vehicle.
A:AnswerIf the surface of your dashboard allows for it, you can use that. Note that you can use an adhesive to mount this dashcam, which is included. The adhesive is made by 3M and sticks very well.
A:AnswerHello there!
Unfortunately, you cannot disable the alerts on the dashcam.
However, you can adjust the impact sensitivity in the dashcam setting which will help slow the alerts down!
