A:AnswerUmer, if necessary, adjust the pre-attached front Floor Levelers at the bottom of both Legs (E and F) to level the unit. If you need further assistance, please contact us at 866-942-5362 M-F, 8:30 AM - 4:30 PM (PST).
A:AnswerThis 3-in-1 console accommodates most flat-panel TVs up to 65" and 135 lbs.; the monitor brackets are universal pattern and it can accommodate VESA 400 x 400 hole pattern.
A:AnswerSlapshot, it would be your viewing preference, the spine provides two height options for the TV set, the overall height of 55.75" is with the swivel in the highest position and this is to the tip of the monitor brackets which need to be centered on the back of your television. Please contact Whalen at 1-866-942-5362 if you have any further questions.
A:AnswerThe swivel bracket was flat in the packaging box when it arrived. It won’t budge either to the left or right. see photo.
Do you have a better solution that works?
A:AnswerOnly way to find out is to use the mounting hardware that came with the stand. If you can safely place your TV flat on a bed or on the floor, you can see if the vertical brackets and the screws work!
A:AnswerI am asking about the wall mount frame when used separately not attached to the tv table. Can i mount tvs bigger than 65 inch for this mount frame detached and mounted to wall.
A:AnswerSo it depends. The vesa mount should work fine! But the tv needs to weigh 150lbs or less. If you have a center channel speaker you may need to put it on the middle shelf if you need the height. I have a 55” and I can have as much as 9.5” between the bottom of my tv to the top of the glass. If you don’t have a center channel as tall as mine and your the is 150lbs or less I’m sure it would handle it fine. However look at my review first!
A:AnswerIf the Vesa holes are not too far apart it should work for a 75", also the weight limit on the stand is 135lb. To be on the safe side try and use the anchors that comes with the stand.
A:AnswerThis TV console accommodates most flat-panel TVs up to 65" and 135 lbs. We do not recommend to use with larger/heavier than recommended Flat Panel TVs or equipment.
A:AnswerYes. It is optional. I set it up with out the mount sticking up past the top glass. They give you a cap for the channel that is behind the stand and it is flush with the top of the stand.
A:AnswerI am thinking not mounted to the spine on the stand. My 65" Samsung, mounted on the highest mount, only leaves about four inches from the top shelf. Maybe a 70", but not a 75". You can wall mount it above the stand, but, that would probably be the only option.
