Customer Ratings & Reviews

Anker has available their SOLIX C1000X Generation 2, a 4-plug variation of the C1000 which has 5 plugs. The box includes the C1000x power station, power cable, 12V car charger cable, and quick user guide/paperwork. The unit comes with a manufacturer's 5-year warranty. PROS: ----------- * Extremely easy to use. Nearly fully-charged out of the box. * 2 140W USB-C charging ports and 1 15W USB-C charging port in addition to a regular USB port at 12W. * Great easy-to-read display with 3 different types of information (see pictures) * Easy to connect to phone via bluetooth (BT) using the Anker app * Power station can be charged via AC cable or by using a car charger (provided) or even a solar panel. Anker has a specific panel that can be used as well, sold separately. This would be great for campers when you need extended power... and if there is sun. * The unit is built well and feel extremely durable. There is a vent on the upper left side of the unit. * It operates quietly when in use. There is a fan, but even with a good load, dB levels aren't excessive. * Anker claims after 10 years, the unit will still have 80% battery levels possible... that remains to be seen, but if so, that's pretty awesome. * The unit can be easily factory-reset with the reset button on the front of the unit. * 2 very grippy rubber feet on the bottom will keep it in place no matter where you put it. CONS: ----------- * A firmware update needed to be done, but it took me 4 tries to get it to completely finish. It continued to fail with each time, getting a higher percentage of charging completion. I don't understand why getting the update was made so complicated in the app and the constant failures. Once it was updated, it appeared ok. OTHER OBSERVATIONS: ----------- * You can turn on the display area, but all ports aren't turned on unless you hold down the circle button in each power area. * This 4-AC outlet model differs from the C1000 model in that the C1000 is primarily sold online. The 4-outlet models are typically sold in big-box stores, based on some of my research. * It's medium weight at approximately 25 lbs. CONCLUSION: ===================== This is my first power station, and I definitely love the portability of this unit. I have a gasoline generator that normally stays outside but can power up some circuits in our home. This battery-powered unit will give us the ability to keep a few more things powered up in the event our power goes out or if we have a natural disaster. If it gets low and we're without power, even the main gas generator can charge it back up. So far, I'm impressed, and as usual, Anker backs up their products if you have issues with it. I'm confident I'll enjoy this power station for years to come. Great job, Anker!

We have quite a few Anker batteries in the house, from smaller portables to a DIY friendly F3800 for whole house blackouts. This battery continues with the great LiFePo (or LFP) batteries that are more safe and reliable than more typical lithium batteries and provide even greater power output (140w in 2 of the USB-C ports) and up to 3000w peak output. ___ Design and Features ___ When compared to our C800, it’s about the same size and weight, but packs in 25% more capacity and stronger output. It’s the first battery that we use for always-on backup (UPS style) for our chest freezer. When power is cut, this battery kicks in. For our medium-sized chest freezer it lasted around 36 hours in our testing, with no difference in freezer performance. This is exactly while this model appealed to us. It’s great for ensuring food won’t go bad if the power goes out of ran extended period while we’re away. After testing and plugging it back in, this power is capable of pulling around 1200w of power to quickly recharge itself. Even during this, I could use ports on the front to simultaneously charge a phone, etc. It’s also the first battery we own that has a Time of Use setting (to charge and discharge based on a schedule reflecting changing grid pricing) as well as a Storm Guard mode to charge at max power when a storm is forecasted in the near future - ensuring that it has the best chance to fully charge before a likely need. While it’s not well documented, the right-most AC outlet is special, a ‘SurgePad,’ capable of allowing higher-power draw tools and equipment up to 2400w (beyond that base 2000w of the other outlets). I tested this battery with our power-hungry espresso machine. As advertised, this battery had no issue providing the 1300w of immediate power it needed. The screen is also improved in these Gen 2 models, it’s no longer just segmented and is instead a vibrant display showing capacity, input, output etc in real time. The screen is arguably not all that important, but it makes for a product that feels all that much more modern and advanced. The solar power input port can also handle 600w (60v), as an improvement over the last model. Some things have been removed in this iteration, however… Gone is the seldom-used LED light bar, as well as a reduction in overall AC outlets (4 instead of 5) in the ‘X’ model, but at just over 1000 kwh, it’s slightly more compact and lighter in design, while having higher power output - I’m not bothered. Dropping a single AC outlet is fine by me, but it’s worth noting that the current non-‘X’model, which comes in a two-tone grey color, retains that 5th outlet at just about the same price. I prefer the dark grey color of this model, but it’s worth noting that you’re getting a little less when buying this one. ___ App ___ The app connectivity continues to be good with these Solix products. It does a nice job of cleanly illustrating the available ports and their current draws, as well as overall battery status in an attractive way. My only gripe is that no actual history is shown, just live readings and a few small graphs that only show the last minute or so (they cannot be expanded.) For something like our freezer, which only pulls power every few minutes when the motor kicks in, it would help to see that behavior over time. Similarly, the battery seemed to have a hard time predicting remaining power in based on actual use over time. Instead, it appears to predict in the moment, assuming the current load will remain consistent. This led to a prediction that it could power our chest freezer for 3 1/2 days, when in actuality it could go about 36 hours. That actual battery life is still very good for our use, but not at all accurate to it’s own in-app time remaining labels. ___ Summary ___ Despite losing an AC port in the ‘X’ model this time around, it offers very good input and output speeds and capacity. New Time of Use and Storm Guard features are nice, as is the faster 10ms response time when using as a UPS. The nicer screen is an appreciated improvement, as is the smaller size and lower weight while retaining the same capacity. The removal of the LED bar is only slightly missed, as we did use that during power outages a few times on another model. It’s new features makes this battery great for leaving as an always connected backup battery for devices like our chest freezer while also allowing it to remained topped off and ready for other uses. Even with a few gripes, I still find it to be one of the best values, offering great functionality and features in a solid design. **** What I liked **** - Updated design is a nice modernization of the last version - More powerful, great selection of ports - Recharges very quickly - Time of Use and Storm Guard features **** What I Didn’t Like **** - App still doesn’t show a history of output beyond a few seconds. - Removal of LED is slightly disappointing (but wasn’t that important) - This dark grey ‘X’ model lacks a 5th AC port this time around, for seemingly no functional reason or cost difference when compared with its sister C1000 model.

The Anker SOLIX C1000X Gen 2 is an impressive power station. Perfect for emergency situations to power household devices, but also small enough for camping or road trips. Perfect AC port placement. Support for DC and solar charging. Full AC charge in under an hour. There are so many positives, it is hard to mention them all. I really like this power station. Unboxing: Anker includes the charging station, an AC charging cable, and a DC charging cable perfect for charging via your car’s DC port. Note: Users will need the Anker application on their smart phone or tablet to update the power station’s firmware and to control the station via Wi-Fi or Bluetooth. There was a firmware update out of the box. Experience: I have been using and discharging the power station for a week now. There are a surprising number of features. You could use this power station as a UPS for your gaming PC or medical device. In my test, the C1000 Gen 2 performed brilliantly, and I did not notice any hiccups or glitches when switching from AC to battery power. Charging ports are perfectly placed with enough space to allow for big charging bricks. The USB-C ports are powerful enough to power a powerful laptop. The onscreen display is easy to read and supplies plenty of information. The unit is not light, but it is not too heavy either considering everything packed inside. In my testing, the unit never got too hot, but users should know that should the fans crank up, the power station produces a decent level of white noise. I drained the unit completely twice. Charging back over AC is super quick with the battery fully charged in about an hour. I was unable to test out solar charging at this time. The DC charging was slow. At the 98 W I was receiving via DC charge, it would take an entire day to charge. At best, I could see using DC charging to top the unit off. I mentioned the Anker App, but you can set the app to optimize charge and discharge based on grid peak hours. You can also set up a storm emergency mode assuming your station is connected to wi-fi. The station has an Output Port Memory switch. If the AC outlet or car charger switch is on when the battery is depleted, those ports will automatically turn on when the station reaches ten percent above the discharge limit. I could see this being an excellent feature for those who plan to hook up solar panels to the station. Conclusion: The SOLIX C1000X Gen 2 has a lot to like. If necessary, I could use this in an emergency to run my fridge for six hours. Or I could take it on a trip and charge phones and cameras while running small fans. This is a great little power station. Quite easy to recommend. 5/5

Anker has made a name for themselves as a go-to brand for consumer charging solutions. Expanding on their brand they have entered into the portable power station market. Their newest entry, the Solix C1000 Gen 2, is designed as a portable solution to provide power in a very compact package that is relatively light weight. Does this power station deliver? Time to open the box and find out. In the aforementioned box you’ll find the power station, a decently long power cord (complete with a Velcro wrap to keep it neat when not in use), a cable to charge it from a car “lighter” plug, and documentation. Pulling it out of the box, I was immediately struck by how light (for a battery) and compact the unit is. While using the app is not required, it is recommended to set up the power station, update firmware, etc. Press and hold the power button for a couple of seconds and the station powers right up. Mine shipped with a healthy 78% battery right out of the box. It connected easily to the app and then to wifi (you can choose between local connection through Bluetooth for when you are on the go or the power is out, or wifi connected when at home to check on the power station when you aren’t close to it). An easy firmware update later, and I was ready to go. For an “entry level” power station, Anker has included a ton of features. While many of the features can be set using the front screen and the main button, it is kind of counterintuitive, requiring a ton of button pushes to move through the options as there is no directional control. It’s much easier to use the app, which is intuitive and provides a lot of detail on the power station. With the app, you can see the current power draw, remaining estimated time, connected ports, etc. Conversely, when plugged in, you can see the power draw, charge amount, and remaining time to full. There are several modes and options available, including the ability to charge when power rates are low and discharge to a connected device (like a refrigerator or other appliance) when rates are high if you live in an area where the current market price for power is reflected on your power bill. It also has a mode where, if you limit the peak charge to a certain % to protect the battery (say 80%), if a storm is predicted it will charge to full and be ready to go if the power goes out. It can also serve as a classic UPS, providing bypass power while plugged in to other devices, or as a backup power source for a sump pump in an emergency. It also has a charging mode that can draw an incredible 1600W – basically the full power available on a typical 15amp circuit in your home. This can charge the bank in around 49 minutes, but there is a warning in the app that it will stress the battery and can impact overall life of the battery pack. This would be more for emergency use during a power outage when you want to charge the power station from something like a gas generator and then take it back indoors. Anker says the battery is rated for 4,000 duty cycles and about a decade of regular use, but continually charging to 100% and using the rapid recharge can impact that life. The charge rate, charge %, discharge limit are all configurable, allowing limits to be put on the unit to protect the battery pack. Connection-wise, the power station features 5 AC output ports, including a 20watt one designed for high draw appliances or tools, 1 USB-A, 3 USB-C, and a car “lighter” port. Two of the USB-C ports support power deliver up to 140W, making it able to power most laptops and other devices. In testing, I was able to use the power station to provide portable power for several things, including a shop vac I used to pull water out of some pool equipment. Not having to manage an extension cord was great. I can see a ton of uses for this thing outside of emergency power for various outdoor activities such as powering speakers, keeping food warm, powering a pressure washer (minding the water, unless you have the water resistant bag accessory), to name a few. Overall, this is a great “entry level” power station. It has a decent capacity, and a ton of features, all in a portable package. For emergency use or just providing power where it’s hard to get to, this is an affordable, compact, and accessible option to consider.

The C1000X Gen2 is rugged and well built, The Dark Grey finish is clean and simple and the high grip carry handle makes short movements very easy. It is small in a 1 kWh unit, yet between longer distances it is a two hand carry. The front screen is bright and can be read outside and displays what you actually care about remaining time, input/output watts and battery percentage. Labeling of ports is well defined and the AC outlets and USB ports are placed in a manner that reduces cluttering of cables. This unit is different in terms of its recharge speed. It takes very little time from zero to full on the wall and in my experience, that is a massive benefit when there is a short power window or when I have to run an errands about the campground. Another highlight is the chemistry of LFP battery it is more stable, safer, and has much improved cycle life, unlike older NMC packs. To any one who intends to use station once a week (or in a UPS), that duration counts. Inbuilt 1024Wh it is ideal in Small Appliances, Home office backup and light emergency. It is not supposed to run a whole house, but it will make things necessary to carry on without worries. Under light to moderate loads the noise of the fans is very low and increases in a reasonable way once you push hard. The companion app Bluetooth/Wi-Fi is straightforward yet truly handy to update firmwares, use of ports, set charge limits, and monitor real-time wattage which is very fast and responsive to assume inverter efficiency and overhead. A good guide has it that usable power is nearly 80-85% of the quoted capacity of AC loads. The unit is compatible with portable panels in case you need the actual off-grid flexibility. There is also easy input configuration and the MPPT controller also locks in very quickly once the sun is stable. During sunny days, it is very possible to top off throughout the day and run necessities at night. When you are intending to go solar heavy, make sure the panel has the correct open circuit voltage and make sure your panel connectors are spec wise and buy the appropriate adapter beforehand to avoid the frustration. The C1000X Gen2 is great in the case of short outages. It will run Wi-Fi, phones, lights, a CPAP and a laptop without breaking a sweat. Transfer of sensitive electronics is hassle-free practically, however, when you require the performance of actual zero break UPS of servers or other high end audio systems, you shall wish to be certain of the precise transfer conduct and make a determination. What I Liked Recharging at a fast rate and making it change your everyday usage. Silent fan characteristic at the light loads and the normal operation is quiet in nature. Visual representation and convenient and stable monitoring and control application. LFP chemistry to be on the safe side, to have a long cycle life. just-in-time 1kWh capacity, easily manageable to maintain on top. What Could Be Better Weight is the one that makes it noticeable because it is portable rather than ultra-portable. It is only possible to run a high-draw kitchen appliance in short bursts, it is not a whole-home solution. With large plugs and wall-warts the spacing between outlets can be limited. A 2-3 kWh class unit will suit you well in case you require a multi-day resilience and no sun. Buy It If You desire a reliable and quick charging 1 kWh station to use on the camping trip or when the home is experiencing a temporary power outage. You want have the battery durability and the safety of Lithium iron phosphate chemistry. You are going to use solar or you are going to use it fast between applications. Skip It If The power needs are frequent running of appliances of 1-1.5 kW continuous or long duration cooking needs. You desire a short pack that you can carry. You are creating an entire house backup that will require more capacity and perhaps a new ecosystem. The basics, rapid charging, smart phone control, consistent output, and a sensible 1 kWh capacity that meets most real world scenarios are all hit with the Anker-SOLIX C1000X Gen2. It is the type of power station that is always ready when you are, be it a back-yard movie night, weekend campsite or a short outage on the grid. This would be an easy recommendation in case your use case falls in the 1 kWh lane. When you need the power to charge a device that draws a lot of power every day or when you require more than 24 hours of independence, step up in power but at the cost of practical adaptability, the Anker-SOLIX C1000X Gen2 is the right choice. It is not the largest or most glitzy box on the market, but all the same it is the box that I found myself returning to as it does the bare minimum in an exemplary way.

The Anker SOLIX C1000X Gen 2 is what you need if you're looking for portable power on the go or just need something for back up at home. That being said the Anker SOLIX C1000X Gen 2 has a ton of features that make it a good investment to have all around. The Anker SOLIX C1000X Gen 2 has a capacity of 1024 watt hours with a voltage rating of 120 volts. Rated continuous wattage at 2000 watts and rated peak wattage at 3000 watts. This model weighs in at a little under 25 pounds and the two grab handles on each side make it easy to transport. This product comes in a small form factor making it portable enough that you can take it along with you without it taking up too much space or weighing a ton but still packing enough power to run your electronics or other devices. The Anker SOLIX C1000x Gen 2 teatures 49 minute ultratlash recharging where it can recharge at 1500W. Anker also claims this model has 10 years of "Infinipower" where it is built to last up to a decade of daily use. There is also an option to use solar recharging which is an excellent choice to have as a backup during power outages or while camping (solar panel sold separately). You can also use this unit as a UPS backup, There is a total of 9 ports which include 1 USB - A, 3 USB - C, 4 AC power outlets, car socket and the XT60i input port for solar charging. One the front of the unit there is an LCD screen that displays information. Include in the box are the charging cable and car socket adapter. I've been using the Anker SOLIX C1000X Gen 2 to charge my mobile devices and tablets and getting pretty fast charging times. I've also used it on my coffee machine and it powered though easily, used it on lights/lamps around the house, preparing for that power outage. I've also used it on my freezer in the garage and the unit does it all. The lcd display is also a nice feature to have as it displays all the pertinent info needed while charging/recharging accompanied by the anker app you get all the info needed. I think the Anker SOLIX 1000X Gen 2 is a good investment to have for any household to keep it for backup emergencies or just to go camping.

I’m absolutely in awe of this power station. This has been so useful in just a few short days. It came with an 86% charge but charged to 100% in just a few minutes. I enjoy that it’s big enough to charge several different devices and supply power to multiple things at one time, without sacrificing power from one device to the next. You can power one area at a time, which I appreciate. I also see it as a safety function. When using the saw, I was able to power the outlet portion when in use and turn it off so no power would be supplied to my tool when it was still plugged in and the power station was still on. It is a little heavy, but still portable enough for my family and me to take with us on our many road trips, picnics, and even a short trip to our backyard. We recently used it to power our skill saw and it worked perfectly. We didn’t use the saw much as it began to rain, but for the couple of posts we were able to get up, it only used about 6% of the battery. It even handled a good drizzle before I was able to take it in for cover. I’m not sure how weatherproof it is, but we brought it back out and it still worked with no problem. We did cover it, just in case. I dabble in woodworking and projects around the home and I’ve always had to figure out how I would get some long pieces of wood home. This solves my dilemma. I can pack this and my saw and cut my wood on site. I’m so happy to have this and I will be investing in the solar panels.

Power is one of those things you never really worry about, or think about, till you don’t have it. Then its usually a panic to figure out how you are going to see in the dark, keep your phone charged, or your food cold, or you medical devices running. That’s where this device steps in! I am a CPAP user, and we had a couple times last summer where we had power outages in the middle of the night due to thunderstorms. I was not able to sleep at all without my CPAP, so I wanted to find a way I could keep it going in the event of another power outage. Plus I wanted one with enough power to run or charge other things as well. This Anker unit checked all the boxes for me. Out of the box you can tell it’s a very well built and solid device. I would have no problem bringing this in the outdoors camping or anything like that. It has a very simplistic design, which is something I love. On the front you have a display that shows all the vital information of the power you are using and what you have left. On the front there is also 4 regular plugs, 3 USBC plugs as well as a regular USB port. You literally just have to power up the unit, and plug your devices in and you are ready to go. It really is as simple as that. There is also a companion app on your phone that gives you some more detailed settings you can adjust that you cant do within the unit itself. You can charge the Solix up by using simple AC power in your home. I am amazed at how fast this whole thing charges up. It has what is called 49 Min UltraFlash Recharging, where the unit can charge from 0 to 100 in only 49 minutes. I have heard that isn’t great for the batteries, so I usually just stick with regular charging, which is still extremely fast. There is also a port where you can plug in a solar panel if you are outdoors and don’t have access to AC power. I don’t have a solar panel, so I was unable to test how quickly that charges. Then finally, there is a cigarette lighter port that you can use as well. So pretty much any situation you are in, you should be able to charge this thing. One thing I do wish this had was some kind of onboard storage for the power and/or cigarette lighter cables so they would always be there when you need them and you didn’t have to worry about carrying a second thing with you. It would also be nice if it had a light on it as well so that would be one less thing you have to worry about plugging in, but those are both small gripes. This unit uses the Lithium-iron phosphate batteries which have much longer life and are far less prone to fires if there ever is a failure than regular lithium ion batteries. Now lets get to the performance. I first wanted to test out my CPAP machine to see if this could power it through the night. I have a standard ResMed machine with the heated tubing. After running it for a full 8 hours, the Solix went from 100% down to only 68%. So this could easily power just that for 3 nights if I needed it to. Another thing I was interested in trying was a full-size refrigerator. We have a Samsung 26.7 cu ft refrigerator with the large home hub screen on the front, so I figured that would draw a ton of power and this battery would only last for an hour or two. I was quite surprised to find that with the refrigerator plugged in, it only used about 12% of battery per hour. So, this should be able to run a full size refrigerator for about 8 hours, which is pretty impressive for such a small device. Overall, I think this will be a great addition to our house. Its something we may only use a few times a year, but its great to have the peace of mind knowing its there when we need it. Anker claims this is built to last for a decade and even after charging it 4000 times, the batteries will still have 80% life left in them. So this is definitely one of those things you can buy and not have to worry about for many years to come!

Biggest issue with this model isn't the performance per say but more of the issue of unethical pricing practices. These in-store retailer models are priced $125-$150 more than the ones from the online retailers and comes with one less ac outlet. It being a different model because of the one less outlet makes it unable to be price matched and leaves no room for competitive pricing between other retailers allowing this to be priced substantially higher.

Living on the Texas Gulf Coast we get some serious thunderstorms, hurricanes, tornados and occasionally hard freezes, all of which can play havoc with our power grid. I've got a 9000W dual fuel generator but mainly to keep my refrigerator and freezer running until power is restored. Being a very old Boy Scout I'm prepared for other items like battery powered lanterns and a propane stove but for everything else I rely on battery packs. I have a small unit power my internet modem and TV so we can keep tabs on the weather. The Anker SOLIX was added to my arsenal to power fans at night so my generator can take a break and not disturb the neighbors, at least that's the plan, not to mention a great power source for camping. I ran a medium sized desk fan for 10 hours on a fully charged SOLIX and had 60% power left so I can recharge from the generator during the day and ready for night time. It is very noisy when doing a quick charge. I mean VERY noisy!! However you can dial down to a slower speed and the sound drops considerably and there is even a quiet charging mode. Using the Anker SOLIX app lets you easy switch between 12VDC or 120VAC charging input and charging mode. You can even keep track of the output for each outlet. For camping I'll be able to connect camp lights, a tent fan, and recharge phones/tablets/laptops along with cameras and my drone. I recently purchased a Jeep and plan on doing some overlanding and primitive area camping and boy this unit will come in handy. For car camping, the 12V input lets you recharge it between campsites using the included 12V plug. Pair this with some solar panels (not included) and you even get more flexibility. The SOLIX has 4 each 120V outlets, 3 each USB-C ports and 1 each USB-A port for convenient power and charging. It's a manageable size and a bit on the hefty side but luggable and it's utility benefits are well worth the weight.

As someone who regularly uses a BiPAP to deal with sleep apnea, a power station has been on my camping wish list for a while. Unfortunately, finding an affordable option that's got enough capacity to actually run the power hungry little machines for more than a night is easier said than done. The SOLIX line from Anker seeks to solve that problem by improving the charging process so that you can get some of the benefits of a larger capacity unit without having to set aside the space or one - and while it's not a perfect solution I think it definitely shows a lot of promise for my future outdoor adventures. The unit ships with basically just the essentials. You get the power station, a 120v charging cord (using a standard 3-prong design so you don't need to worry too much about losing it) and a 12v charging cord for your car. It's about the size and weight of a small drinks cooler that's been fully loaded with ice - making it fairly easy to carry around a campsite. Since I'm hoping to rely on it for longer excursions I also paired it with an inexpensive 200w foldable solar panel array, which I may expand in the future to up charging speed. The adapter that came with the panels worked with the power station out of the box, so no additional accessories were required to set it up for off-grid operation. Performance in the wild is very good. The power station arrived with an almost full charge, and it took less than an hour to top up before heading out. With just one button to turn it on there's not a lot of complexity to worry about, you literally just plug stuff in and it works. And I found it worked very well - keeping all our devices charged (phones, tablet, etc) while also running my BiPAP. I wasn't able to fully vet the solar charging since cloud cover was surprisingly dense for most of the trip, but even with less than ideal light conditions the unit steadily charged throughout the day and (with a little help from the car) ended up lasting the full trip with plenty of charge to spare.