Customer Ratings & Reviews

One of the best cases I've owned for airflow! I had a cooler master lite box with an acrylic front panel, and my GPU temps (2070S) would shoot up to the low 80's under full load, peaked at 85c. The only way I could offset those temps were to take off the front panel, but that meant no filtration. So in the end I needed a new case, not too expensive but designed with airflow as the main priority. Caught this on a small sale and don't regret it one bit. My GPU never goes above 72-73 under full load (with fans adjusted of course). Easy to build in and corsair even provides extra materials for cable management. Update: There is a PSU shroud cover available for this case, but you must submit a ticket through corsairs website and request one for free.

Great case with really good cable management in the back with high quality straps and and big cable channel with tie down points and cable openings all around the case. Nice airflow design in the front with big filter. Really nice, premium feeling case for the money.

Very good case. There’s a lot of room inside the case. Comes with 3 fans with RBG. Added 3 more fans for exhaust (back and top). 2x trays for SSDs on the side, 2x trays for HDD or SDD at the bottom (with proper cable management). Glass panel which can be configured to either side of the case.

Best airflow case. Top quality used!!!! Very good airflow and spacious. The only thing about this is watch what aio you buy if you install it on top, if you have tall ram, you won’t be able to put in or remove them because the AIO is in the way. You would have to remove the Ayo in order to change out ram or add more

My old case wasn't ideal for airflow so I decided to make a change and went with this. This case has plenty of space and clearance for most builds. It comes with two 120mm fans (non rgb) but they can easily be swapped with RGB ones which is what I did. The airflow is fantastic and I'm now getting lower temperatures under load so I don't have to worry about it overheating. Cable management wasn't an issue either and the case does a good job in concealing all the cables in the back as well. Highly recommend this for those who decide to build a PC for the first time.

Needed a not-so-expensive case mid-tower case to build my 8 year old his first computer with some components I had on hand with a few new fans, etc… This case was in stock ay my local Best Buy and fit the bill perfectly for what I was using. The tinted tempered glass panel is a nice touch in my opinion. It comes with two fans already mounted, one on the front of the case and one at the rear. I am using both of them and they are fine. The two SSD mounts are nice (I am using one) and it comes with a hard drive tray for two additional storage drives. The reason for the 4 star rating over the five, is because of the hard drive tray. When you install the power supply unit, you have no room to connect the cables because of the hard drive tray. You can move the tray further to the left (which I HAD to do) so you can at least TRY to connect your PSU cables. Keep that in mind if you are using HDD’s. Cable management is nice though. This is a nice case for builds like mine and maybe a mid tier build using AIO coolers. Overall I am happy with the case and it presents really well.

Plenty of airflow, clean aesthetics. Perfect size and easy to build in. Pretty much the perfect case.

This case is perfect. It was large enough for the multiple fans I wanted to install. Fits perfectly with my motherboard. Space for me to put my light strips and the clear glass side just makes it look beautiful when turned on. Some times I turn my pc on just to look at it. This is my second build. First build was a media pc with i5 12400. This build was i7 12700k. My next build may be 14th gen. I will be stopping at BestBuy for cases and other components. This is a strong solid case.

Picked one up because my old case couldnt fit the components I got and its sweet. Theres a few different versions, like my buddy has an all white with see through glass and mine is black with tinted glass. The tinted glass is amazing because even if you have kind of a mess of cables like me itll still look super clean. Also the removable trays for the front fans and bottom tray under the PSU make it pretty easy to maintain minimal dust/hairs in the tower.

This case was a perfect fit for my gaming PC. It has good airflow and helps with cable management. Good enough to fit X870E, 4080 super, 240mm AIO, 4 fans, and a mini LCD screen. No wonder it’s a highly rated case

Great case overall. Great on space and nice assortment of front i/o ports. Comes with a few velcro straps for cable management and zip ties as well. The only gripe I have is the front panel where you attach front fans is very thin metal. When I was screwing the fans in the front piece of metal was bending my very easily. Not a big deal since you won’t be changing fans out very often but still good to mention. I would buy it again.

Best PC case I’ve ever owned. Tons of space to work in and room to grow, this is an amazing case. After replacing my old Atrix case with this gem all my heat problems disappeared. CPU, GPU and RAM all hold steady temps even when gaming or editing videos for extended periods of time. It has a removable fan filter in the front that keeps 85%+ of dust out of the inside of the case. It took the 240mm liquid CPU cooler with room to spare. Paired it with some Corsair led fans and it really looks good inside and out.

This is seriously a great case. Building in it was pretty easy, the one issue I hade was getting my PSU in. I hade to unplug my USB connections and my HD Audio on my MOBO so they did not get pinched when installing the PSU. Even with no wires in the way, it still was a very tight fit so make sure you look at the dimensions of your PSU to make sure it will fit. Other than that, This case just looks beautiful with all your eye candy RGB installed. Really a case you can show off. Pros: Great thermals Looks incredible Easy to clean Decent cable raceway Cons: Only one USB-A port on front IO PSU opening on the back could have been bigger Only one intake and exhaust fan

Very easy to build in case lots of room i have a micro atx board which still looks great which is hard for a lot of mid tower cases to do. Lots of room for all my components to breathe and looks amazing in my all black build. Glass is very strong and holds tons of space for my triple fan 3080. 10/10 will be keeping this case as long as i can.

This is a seriously good case. Has great airflow, great build quality, and it really easy to build in. I swapped from an NZXT 500 to this, and while they are about the same size (4000D is a little wider), I found building in the 4000D a little easier. The great airflow means I can run my fans at lower speed too, which is great. It can also fit a 280mm and a 240mm AIO at the same time, which is the main reason I bought it. Have a picture below shoing that its possible (ignore ugly cable and cables, GPU pump cable was temporary, and rest of cables will be replaced with custom sleeved ones).

Great air flow to keep all of your components cool. Very spacious and awesome cable management. Was able to fit my RTX 3080 inside with plenty of room for a front mounted AIO if wanted.

A super easy, quiet and competent case to build in! I got the Corsair 4000D Airflow on a Black Friday sale, the preinstalled fans are super quiet, and the extras I put in have no rattle or vibrations thanks to the very intuitive places to place fans and even an AIO. If you're in the market for a case thats great on airflow make sure you check this one out!

I went back and forth between multiple cases before settling for this one and am glad I did. I have three front rgb fans along with the Corsair H100i aio cpu cooler and rear rgb fan and my temps never go past 70 while gaming even at my low fan speeds. I was worried about this case being too big and bulky but I now think it’s the perfect size.

So I decided to upgrade my case due to some pretty bad thermals in my previous rig. The Corsair 4000 series looked very appealing due to it's attractive build and quality features. I originally ordered the 4000X but did some additional research that the glass front panel negatively impacted thermals. So the 4000D Airflow looked to be a good choice. It wasn't... It was a GREAT choice! The best features? 1) Tremendous thermals. I was previously running in the mid 60's at max usage and had to run the fans at full speed to do that, making the rig noisy as all get out. With the Airflow 4000D I barely run the fans at idle and at max my temps are in the mid 50's! The lowest I've ever had in any of my pc builds! 2) Love the cable management system! Very easy to use and I've never been this organized in the back of my desktop. In addition, I'm liking the shield to the right of the 24 pin connection so you can't see behind the motherboard. Also, it's nice to have space down below for my ssds, which also helps to hide wiring, etc. 3) The front panel grid is great and it's nice that you can order an additional glass panel so you can switch out looks based on what you're using the desktop for. At idle, the glass panel works well and for only an extra $10, it's worth it. 4) Plenty of spaces for extra fans. I already had a full set of six Corsair RGB fans so it was great they would all fit! 5) The overall build quality of the case is top notch! It looks great and is sturdy and durable. A few minor issues: 1) I would have preferred a glass door panel with hinges. Although the side glass panel is well built, when I go to close the side panel I always worry I'm going to break the glass when it snaps back in place. It's pretty tight to close. 2) I would have preferred holes that were a few mms larger so I could have run my usb and fan plugs in spaces that were closer to their ports. 3) I think the top shelf grid could have been laid out with better positioned holes for center mounting of fans. I was able to find a way to modify, but Corsair should have either centered the adjustable slots or not had them at all. 4) As much as I like the vertical mount access, the backplates are positioned in a way where the GPU is way too close to the side glass panel, choking off air to the card. Just not a realistic positioning to keep a vertical GPU cool. 5) It would have been nice to have had an additional USB 3.0 port on the top of the case and I do miss the cpu activity light. All in all I'm still very, very happy with this case and would recommend it to anyone who wants a great looking case that has some of the best airflow for it's size and price. Well done Corsair!

Just bought this case a week ago and absolutely love it! I had a NZXT H500i and it was nice and all but when I upgraded my GPU from a 2060 to the 3070TI FE card the temps where too hot for my comfort. This case has amazing thermals BUT be away if your CPU is a warm cpu and you have a toasty GPU mounting a AIO at the top you will see higher thermals for cpu. Other than that with good airflow in this case my GPU dropped from 90c to 70-80c which is really good in my opinion. oh and the cable management is very easy and roomy as well!!!!