Customer Ratings & Reviews

My first 3D printer. Very pleased with the look and the printer speed/quality out of the box. I have made a few upgrades (at least what I think) out of curiosity and everything works awesome! Have run more than 20lbs of filament trough the printer.

Fast 3D printer awesome machine! Works great and quieter than most out there. Also buy this from Best Buy they always have the best prices.

Initially, this printer seemed ideal. It has a large bed and it prints fast. It has all the features i wanted, except multi filament support, which can be added with an upgrade kit. The price was right, and everything seemed peachy. I was getting nice prints at first glance. After a while, i noticed that the first layer of the print was poor. I figured out how to re-level it, and if that was all, I would still be happy. After further inspection, i noticed the bed of this printer is horribly warped. Now i need to purchase a bed upgrade because, after some research, I found that this is normal for this printer, and getting a new bed from the manufacturer isn't likely to help. This bed upgrade is going to be expensive. I am not happy.

The printer is packaged well and basically ready to go out of the box. Setup instructions were clear and the inbuilt models came out extremely well - and quickly. I did have an initial hardware fault but Creality support was able to diagnose it and sent me the replacement part under warranty. Unfortunately, There were no removal and replacement steps, but I finally found where the part was and performed the repair. From a printing perspective, I was able to download some models, but had issues getting the filament to stick to the base plate. This may have been due to unfamiliarity of the Slicer software because other reviews seemed to be able to print without issue. This printer would be a great second 3D printer as it is fast and relatively quiet.

I think this printer is fantastic. Everything I've printed on it has had no problems. The print times are accurate and the precision is pretty good. My only gripe is the app. Could be very much improved.

I bought this as a novice 3D printer enthusiast hoping to avoid leveling issues with my previous printer. It did a really good job until one day it catastrophically failed. Be gentle with it, treat it nicely and it will last you a long time. It's nice that it can be upgraded to the CFS system and it can also have the extruder changed to different styles. It's fun to find out just what I can print and make on my own.

This printer is not perfect, but it is very good. I picked up this printer during the black friday special for 650+tax. Setup is straight forward and it works well. There is the occasional extruder jam due to a heating problem related to the extruder motor that is a known problem but overall it does work well and I'm more or less happy with it. Creality and the community will develop solutions to the issues that it has and then it will be a very outstanding printer that don't spy on you like others do (looking at you bambu labs). I would buy it again. Root it, install your favorite klipper interface and be happy.

Excellent 3D printer. I have used it quite extensively and printed many models including from a converted 2D photo. Leveling takes quite some time but that is expected for such a fine product. Only problems were frequent nozel changing.

The Creality K1 Max Is a great 3D printer and looking to purchase another machine!

Great value for a large format 3D printer. Pretty accurate out of the box. Prints PLA flawlessly, prints ABS fairly well, but will require some finessing of settings. Quality is very very nice, especially compared to some of the earlier Creality printers.

great larger size for printing but some parts that I have had to replace are hard to find because the Max and normal K1 don't have fully interchangeable parts

I LOVE this printer. I have had 3 before it, Ender 3, Tina2 Mini and a Kobra Go. I HATED the Kobra Go and was fed up having to always mess with it and babysit it just to get a good print. With this, it JUST PRINTS. I dont need to fuss with it. Combined with the creality filament its amazing!

My first 3d printer, easy to set up, software works pretty well, printed a hand full of things already and generally successful prints.

It prints good but the problem with this printer is the loading and unloading of the filament gets to be a little bit of a pain and the adhesion to the plate Is a little bit of a problem, also, very loud, you have to print one of the quiet adapters to put on the fan or switch out the fan for a quiet one. It is very loud other than that it does print nicely, but I wouldn’t pay the price that it’s asking I wouldn’t go more than $500 for this printer my bamboo lab A1 does just as much as this printer works very well prints look the same just at the bed is not as bigger

First one worked for 4 days of non-stop printing projects. Came home after starting a large print to find the printer locked up. Screen was unresponsive. Ended up power cycling it and it came up saying failed print and asked to continue where it left off. Cool..... not really....16th of an inch gap created. Locked up exactly the same way later in the print. Tried the continue option upon power cycling. 16th gap again. Had latest firmware too. I contacted the company but it took 3 days for a respone and many questions from them. Figured I was within the return window and returned it to BB. Read on the web Crealty support is meh. Replacement came to my house....UPS smashed in one of the sides. Returned it to store and ordered another one. Figured ship to store this time would be safer....nope....that one too smashed in...same spot. It's a specific corner that Crealty has zero padding or protection. Fourth one now ordered to my house...arrived in good shape finally!

Good quality, works great. Only issue is a good lack of documention.

Great product ! Really easy to use and extremely fast

Great fast and smooth. Have done several big projects and several small ones too. All have been great so far.

I'm moving up from an Ender 3 Pro and the difference is like going from minor to the big leagues. My prints using stock settings and firmware are light years ahead of my modded and upgraded Ender. You still have to fine-tune temps, support settings, etc. but the calibration options make it much easier than manually doing everything. It even comes with a backup hotend and tips. You will not be disappointed.

Super fast, enclosed printer with a large build volume. Been printing non stop and it just works.