SANUS Elite - Advanced Full-Motion TV Wall Mount for Most 32"-55" TVs up to 55 lbs - Tilts, Swivels, and Extends up to 20" From Wall - Black Brushed Metal
- General
- Product Name: Advanced Full-Motion TV Wall Mount for Most 32"-55" TVs up to 55 lbs - Tilts, Swivels, and Extends up to 20" From Wall
- Brand: SANUS Elite
- Assembly Required: Yes
- Model Number: BMF320-B1
- Color: Black Brushed Metal
- Features
- Mount Profile: Low Profile (The view of the product when seen attached to a wall or surface.)
- Mount Style: Full Motion, Tilting, Swiveling
- Pan: 60° to -60° (Angles to the left or right for customized viewing and/or accessibility.)
- Tilt: 5° to -15° (Angles upward or downward for customized viewing and/or accessibility.)
- Indoor or Outdoor Use: Indoor
- Cord Storage: true
- Compatibility
- Maximum Weight Capacity: 55 pounds (The maximum load that can be supported by the product.)
- Compatibility: 32"-55"
- Mount Location: Wall
- Maximum Television Size: 55 inches
- Minimum Television Size: 32 inches
- VESA Wall Mount Standard: 400mm x 400mm, 300mm x 300mm, 200mm x 200mm, 100mm x 100mm (VESA wall mount standards refer to the spacing of screw holes built into a TV in order to fit with standard TV wall mounts. These standards are implemented into most TVs and monitors.)
- Dimensions
- Product Height: 15.91 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 19.72 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 2.04 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Product Weight: 11.69 pounds (The out of box weight of the item.)
- Maximum Extension: 20 inches
- Minimum Mounted Distance from Wall to Television/Monitor: 2.04 inches (The minimum distance from the product to the wall as the product is mounted.)
- Included
- Hardware Included: true
- Material
- Mount Material: Metal, Plastic
- Other
- UPC: 793795533364
Sanus Elite products are engineered to deliver unparalleled performance that will elevate your TV and audio experience. Designed to blend seamlessly with TVs and décor, the Elite Advanced Full-Motion Mount was inspired by the sleek look of modern TVs and ultra-high-end electronics. Expertly engineered with FluidMotion design, the Elite Advanced Full-Motion Mount effortlessly get the best view from anywhere in a room.
- Full-Motion TV Mount Compatible with most 32" - 55" TVs: Up to 55 lbs. for sturdy support.
- Easy to hide and access cable management: Built-in cable management makes it easy to achieve a neat, clutter-free TV setup.
- Tilt, swivel and extend: Tilts 5° to -15°, swivels 60° to -60° and extends up to 20" to adjust viewing angles to suit your preferences.
- Universal TV Interface: From VESA 0mm x 100mm through 400mm x 400mm for a variety of mounting options.
- Corner Mounting: With 20" of extension you will be able to place your TV in the corner.
Whats Included
- Advanced Full-Motion TV Wall Mount
- Mounting hardware
- Instruction manual
- Wall plate template
Product Manuals
A: Yes, I definitely would not rely on hollow wall anchors to hang a TV on. NO NO NO! Here's what you can do so you can place your TV wherever you want on any wall BUT this still involves locating studs (which is inevitable really). Why do this?: If you find that using only 2 studs will put your TV too far left or too far right on a given wall, you can screw a 2X4 (with 3 pieces of 3/8 inch by 4-5 inch long lag bolts ) across 3 studs (make sure you have a solid "grab" onto each stud with your 4 to 5 inch lag bolts. Put the the 2X4 right onto the wall over the drywall/plaster where you were planning to mount the TV in the first place, then simply mount the TV mounting bracked to that 2X4. It'll all be hidden by the TV (tip: paint it the same color as the wall) so it works quite well and gives you more flexibility on where you put your TV You may need something different than a 2X4 depending on the orientation of the TV hanger's mounting bracket that you choose. Some of the brackets have holes for the bolts (the ones you will now screw into that 2X4) that are left and right oriented and some are up and down. You'll see what I mean when you get there. I could explain that too but I'm tired. GL!
Q: What is the maximum extension length?
A: Hi, This mount has up to 20" of extension. Thanks, - Haydn @ SANUS
Q: What wall mount will work for my Sony Bravia KDL-50W700B?
A: This series of Bravia TVs don't have a traditional 4 hole VESA mounting pattern... they came with their own proprietary stand that doubled as a wall mount. We do not currently offer a compatible TV wall mount.
A: Hi, Thanks for the question. The lag bolt is 1/4 x 2 3/4 in. Thanks, - Haydn @ SANUS
A: Hi Jessi, This mount has cable covers on the arms of the mount. You then route the cables through the arms and then put the covers back on and they should be hidden. In the instruction manual there are photos that should help show how to do it. If you have any questions give us a shout at info @ sanus . com or at 1-800-359-5520 we are happy to help! Thanks, - Haydn @ SANUS
Q: How wide and tall is the wall mounting bracket and how far apart are the holes for attachment?
A: Thanks for the question. The mounting bracket is 13 inches high by 2.59 inches wide, and the mounting holes are spaced 11.39 inches apart. Let us know if you have any additional questions. - Katie @ SANUS
Q: Will this work on a Sony - 55" Class BRAVIA XR A80K 4K HDR OLED Google TV?
A: Hi Will, This mount should be compatible with your TV. It has a 300x300 VESA pattern, weighs 40lbs and is 55" which all fall within the range of this mount. Thanks, Nate @ SANUS
Q: Will this work with LG 48” or 55” Oled TV with a VESA pattern 300mm x 200mm ?
A: Yes, this mount can support a 300x200mm VESA pattern. Thanks, - Haydn @ SANUS
