Sennheiser - Wireless Presentation Set with Omnidirectional Lavalier - Black
- Key Specs
- Wireless: true
- General
- Product Name: Wireless Presentation Set with Omnidirectional Lavalier
- Brand: Sennheiser
- Model Number: XSW 12-A
- Dimensions
- Product Height: 8.78 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Length: 2.59 inches (The out of box length of the item. Length is measured as the longest dimension of the item.)
- Product Width: 10.47 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Weight: 1.82 pounds (The out of box weight of the item.)
- Features
- Wireless: true
- Power
- Battery Size: AA (The battery size required for operation.)
- Warranty
- Manufacturer's Warranty - Parts: 2 years
- Manufacturer's Warranty - Labor: 2 years
- Other
- UPC: 615104219670
This Sennheiser XSW 12-A wireless presentation system features a clip-on microphone for amplified sound, a bodypack transmitter for clear audio transmission and a True Diversity receiver for crisp reception.
- Bodypack transmitter: Allows clear audio transmission and features selectable sensitivity and an illuminated mute button for customized use, and a microphone/line input for a simple connection.
- Omnidirectional clip-on microphone:
Easily attaches to clothing, ensuring a clear, natural sound. - True Diversity receiver:
With 960 tunable frequencies across 24MHz to avoid interference. Dual outputs with balanced XLR and unbalanced 1/4" are selectable for microphone or line level. - Up to 250' wireless transmission range:
So you can move freely around the room. - 8 frequency banks:
With 12 coordinated frequencies in each bank, to allow fast setup of multichannel systems.
Whats Included
- SK 20 bodypack transmitter, EM 10 True Diversity receiver, ME 2-2 omnidirectional clip-on microphone
- NT 2-3 power supply
- 2 rod antennas, 2 AA batteries, pouch
- Owner's manual
A: Thank you for your question. If you currently have a hard wired mic set up with your system then you have all the cables you need. You can use connect your mic cable to the back of the wireless and it will run through your current system. If you have additional wireless questions you can contact us at 1-877-SENNHEISER or email our technical services by going through our website www.sennheiserusa.com
A: Hello, On average most pro audio systems will accommodate this system as an input device. This will however depend on the mixing console, amplifier etc A typical system would consist of the following: Microphone - Input Mixer - to route audio signal Amplifier - power speakers Speakers - Audio out put With these main components you would have everything you need, and these will vary in size from portable small systems to large scale installations. For portable systems it is common to use powered speakers, that have an amp built in. This gives you less items and lighter weight, so going with a powered speaker, small mixer and our wireless is the normal set up for travel use, like a mobile DJ set up for example. I hope this was helpful, let me know if you have any other questions. Thanks
