SpeakerCraft - 2-way 100 W Speaker - Pack of 2 - Multi
- Key Specs
- Speaker Type: In-Ceiling
- RMS Power: 100 watts (The maximum amount of continuous power the device is able to handle.)
- General
- Product Name: 2-way 100 W Speaker - Pack of 2
- Brand: SpeakerCraft
- Model Number: MT6 One
- Audio
- Speaker Type: In-Ceiling
- RMS Power: 100 watts (The maximum amount of continuous power the device is able to handle.)
- Impedance: 8 ohms (Describes the resistance of an electric signal throughout the system. Devices with low impedance require less power to deliver optimal signals but are more at risk for damage from overloading. Higher impedance requires more power but is more protected from overload damage.)
- Minimum Frequency Response: 50 hertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The minimum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Maximum Frequency Response: 20 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Sensitivity: 92 decibels
- Tweeter Size: 1 inches
- Woofer Size: 6.5 inches
- Dimensions
- Product Height: 12.2 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 8.2 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 3.2 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Material
- Tweeter Material: Other
- Midrange Material: Other
- Woofer Material: Other
- Included
- Speaker Wire Included: false
- Certifications Listings & Approvals
- ENERGY STAR Certified: false (Devices carrying the ENERGY STAR service mark, such as computer products and peripherals, kitchen appliances, and other products, generally use 20% to 30% less energy than required by federal standards.)
- Warranty
- Manufacturer's Warranty - Parts: Lifetime
- Manufacturer's Warranty - Labor: Lifetime
- Other
- UPC: 664254103315
The 6-inch MT series was created to address those situations where higher performance was required from an in-wall installation. Beginning with high-quality components, SpeakerCraft created a very unique design that allowed for greater electronic and physical adjustability. They began by mounting both the midrange and tweeter drivers on a single module called the “Uni-Pivot.” This allows the mid and high frequencies to be directed toward the listening area, a function formerly only available in a cabinet speaker. They also added individual EQ adjustments to each speaker to allow you to tune the speaker based on its proximity to adjacent walls or ceiling surfaces.AcoustiCell is a revolutionary wall damping system made from a blend of sound absorbing materials that truly enhance the performance of the speaker by deadening the wall and reducing unwanted sympathetic vibrations. Still a critical part of the SpeakerCraft line, the MT series may offer the solution you are looking for.These speakers are left and right specific and only sold in pairs.
