- Key Specs
- RMS Power: 150 watts (The maximum amount of continuous power the device is able to handle.)
- Peak Power Handling: 300 watts (The maximum amount of power an electronic device, like a speaker, can handle without damage. This refers to short bursts of power, while root mean square (RMS) power handling indicates the amount of continuous power a device can sustain. Higher levels of distortion can also occur at peak power levels when the device is powered beyond its recommended usage.)
- Impedance: 4 ohms (Describes the resistance of an electric signal throughout the system. Devices with low impedance require less power to deliver optimal signals but are more at risk for damage from overloading. Higher impedance requires more power but is more protected from overload damage.)
- Minimum Frequency Response: 0.03 hertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The minimum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Maximum Frequency Response: 0.5 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Sensitivity: 86.76 decibels
- Dual Voice Coils: false
- Woofer Size: 12
- Mount Depth: 5.71 inches
- Woofer Composition: Polypropylene
- Woofer Surround Material: Butyl Rubber
- General
- Brand: Stinger
- Model Number: SEA12S4
- Product Name: 12” 150W Single-Voice-Coil 4-Ohm Marine-Grade Subwoofer
- Color: Silver
- Number of Subwoofers Included: 1
- Audio Power
- RMS Power: 150 watts (The maximum amount of continuous power the device is able to handle.)
- Peak Power Handling: 300 watts (The maximum amount of power an electronic device, like a speaker, can handle without damage. This refers to short bursts of power, while root mean square (RMS) power handling indicates the amount of continuous power a device can sustain. Higher levels of distortion can also occur at peak power levels when the device is powered beyond its recommended usage.)
- Integrated Amplifier: false
- Audio
- Impedance: 4 ohms (Describes the resistance of an electric signal throughout the system. Devices with low impedance require less power to deliver optimal signals but are more at risk for damage from overloading. Higher impedance requires more power but is more protected from overload damage.)
- Minimum Frequency Response: 0.03 hertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The minimum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Maximum Frequency Response: 0.5 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Sensitivity: 86.76 decibels
- Features
- Dual Voice Coils: false
- Grille Included: true
- Marine: true
- Dimensions
- Woofer Size: 12
- Cutout Diameter: 11.1 inches
- Mount Depth: 5.71 inches
- Product Height: 5.7 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 12.5 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 12.5 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Product Weight: 24 pounds (The out of box weight of the item.)
- Design
- Woofer Composition: Polypropylene
- Woofer Surround Material: Butyl Rubber
- Frame Material(s): Other
- Enclosure
- Enclosed: false
- Other
- UPC: 609098828000
Stinger’s off-shore and off-road ready 12” subwoofers deliver clean, hard hitting bass wherever the water or trail takes you. This UV-tested 12” 150W Single-Voice-Coil 4-Ohm Marine-Grade Subwoofer by Stinger features precision non-corrosive terminals to create a solid connection in any challenging environment and has been fully tested in both salt and fog conditions. The SEA12S4 can handle up to 300W peak power (150W RMS power) with its polypropylene mica-injected cone and features butyl rubber surrounds to provide the flexibility and durability you need in a marine or off-road environment.
- Marine-grade 12” subwoofer: Add powerful bass to your marine or powersports audio setup.
- Salt, fog, and UV-tested: For use in both freshwater and saltwater.
- Precision non-corrosive terminals: With butyl rubber surrounds for long-lasting durability in any environment.
- Polypropylene mica-injected cone: For enhanced bass response.
- Handles up to 300W peak power (150W RMS): Provides rich sound.
- 4 ohms impedance: Conducts power evenly to keep the speaker at an appropriate level.
- 30 - 500 Hz frequency response: For accurate sound reproduction.
- 86.76dB sensitivity: Picks up the highs and lows for faithful sound reproduction.
- 11.13” mounting diameter; 5.71” mounting depth: For the right fit.
- Marine-grade 12” subwoofer: Add powerful bass to your marine or powersports audio setup.
- Salt, fog, and UV-tested: For use in both freshwater and saltwater.
- Precision non-corrosive terminals: With butyl rubber surrounds for long-lasting durability in any environment.
- Polypropylene mica-injected cone: For enhanced bass response.
- Handles up to 300W peak power (150W RMS): Provides rich sound.
- 4 ohms impedance: Conducts power evenly to keep the speaker at an appropriate level.
- 30 - 500 Hz frequency response: For accurate sound reproduction.
- 86.76dB sensitivity: Picks up the highs and lows for faithful sound reproduction.
- 11.13” mounting diameter; 5.71” mounting depth: For the right fit.
Whats Included
- Stinger 12” 150W Single-Voice-Coil 4-Ohm Marine-Grade Subwoofer
- Removable grill
- Installation guide
- Stinger 12” 150W Single-Voice-Coil 4-Ohm Marine-Grade Subwoofer
- Removable grill
- Installation guide
