Yamaha - 10" 100W Powered Subwoofer - Black
- Key Specs
- RMS Power: 100 watts (The maximum amount of continuous power the device is able to handle.)
- Woofer Size: 10 inches
- General
- Product Name: 10" 100W Powered Subwoofer
- Brand: Yamaha
- Model Number: YST-SW216
- Audio
- Minimum Frequency Response: 12 hertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The minimum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Maximum Frequency Response: 180 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Enclosure Type: Other
- Enclosed: true
- Dimensions
- Product Height: 13.38 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 13.38 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 13.38 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Product Weight: 24.69 pounds (The out of box weight of the item.)
- Material
- Woofer Composition: MDF
- Warranty
- Manufacturer's Warranty - Parts: 2 years limited
- Manufacturer's Warranty - Labor: 2 years limited
- Other
- UPC: 027108924724
Enjoy robust low-frequency audio with this Yamaha YST-SW216 100W powered subwoofer, which features a 10" multirange, long-stroke-cone driver for high-quality sound and Advanced YST II (Yamaha Active Servo Technology) for optimal performance.
- 10" powered subwoofer: With a multirange, long-stroke cone delivers authoritative bass for high-impact home theater audio.
- Internal amplifier: Supplies 100W dynamic power for a high level of volume with minimal distortion.
- Advanced YST II (Yamaha Active Servo Technology): Helps cancel impedance to promote linear speaker motion for optimal sound pressure levels and enhanced performance.
- Front-firing design: Directs bass output to your listening area.
- Magnetic shielding: Helps prevent interference from nearby A/V components.
- Selectable 40-140Hz high-cut filter: For flexible operation.
- High-density MDF cabinet: Offers durability.
- Linear port: Helps minimize extraneous noise.
- 25-180Hz (-10dB) frequency response: Accurately reproduces low-end audio to ensure a robust soundscape.
Whats Included
- Yamaha 10" 100W Powered Subwoofer
- Owner's manual
Q: Does this subwoofer come with a RCA jack?
A: yes, it does.
A: undefined
Q: Does the power button have to be on at all times
A: Yes it does in order to work
Q: Can this be used for a kick bass?
A: If you use this as a kick bass, you will surely blow it up. Get an amplifier and speaker system made to reproduce the consistent thumping you want to reproduce. But if you want a great subwoofer for a home theatre for a small amount of money, you can’t beat it. ( pun intended).
A: Yes it uses rca connectors and easy to hook up
A: The sound bar needs to have an output for a Subwoofer for it to work and it doesn’t include a sub cable, but B.B. will sell you one for about 15 bucks.
Q: does it work with onkyo hr t120 receiver
A: I am not familiar with the receiver you listed, but there are a couple of ways to connect this subwoofer to many different kinds of receivers. First Approach: If your receiver has an output called sub or sub-woofer, with a RCA connector, you can use a subwoofer cable or RCA cable to directly connect the receiver and the subwoofer. If your receiver does not have that connector, it may still be possible to connect it to the subwoofer. Second Approach: Run the speaker cable from the receiver to the subwoofer and then attach a speaker cable from the subwoofer to the speaker. Doing this for the left and right channels, making sure you connect the positives (red) and negatives (black) terminals to match how you have them connected already to the speakers. This is just the basic idea, the user manual goes into more details for getting the subwoofer connected to receivers. HTH.
