Skip to contentGo to Product Search
Main Content

DS18 Audio - PRO-W 10" Neodymium Subwoofer, 400W RMS Single 4-Ohm

Model: PRO-W10.4SNEO
SKU: 13007883

Reviews coming soon

Sold & shipped by

About this product

The PRO-W10.4SNEO is a 10" car subwoofer from the DS18 PRO-W series. It handles 400 watts RMS and uses a single voice coil at 4 ohms per coil, which keeps wiring simple with most monoblock amplifiers. Peak power handling is 800 watts. The water-resistant cone holds up to moisture and spray in open-air installs. Mounting requires a 9.1" cutout diameter and 4.25" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.

Features

  • 400W RMS / 800W Peak Power Handling

    Rated at 400 watts RMS and 800 watts peak. Behind that rating: 2.5" voice coil on a til former wound with SV wire and an 8.8 oz ferrite motor. That is what lets a 10" cone move this much air without losing control.

  • Single 4-Ohm Voice Coil

    The single voice coil design keeps wiring simple and works with most monoblock car amplifiers without impedance calculations.

  • 91dB Sensitivity

    A 91dB sensitivity rating turns amplifier watts into audible output efficiently, so you get more usable bass from the power you already have.

  • Fitment and Recommended Enclosure

    This 10" subwoofer requires a 9.1" cutout diameter and 4.25" of mounting depth. DS18 recommends a sealed enclosure of 1.4 cu ft and a ported enclosure of 1.5 cu ft tuned to 45Hz. Check these numbers against your enclosure before ordering: enclosure volume and tuning change the low-frequency response as much as the driver does.

Specifications

  • RMS Power
    400 watts
    Peak Power Handling
    800 watts
    Impedance
    4 ohms
    Sensitivity
    91 decibels
    Dual Voice Coils
    No
    Woofer Size
    10"
Sponsored

Reviews

This product doesn't have any reviews yet.

Compare similar products

DS18 Audio - PRO-W 10" Neodymium Subwoofer, 400W RMS Single 4-Ohm
DS18 Audio - PRO-W 10" Neodymium Subwoofer, 400W RMS Single 4-Ohm

The PRO-W10.4SNEO is a 10" car subwoofer from the DS18 PRO-W series. It handles 400 watts RMS and uses a single voice coil at 4 ohms per coil, which keeps wiring simple with most monoblock amplifiers. Peak power handling is 800 watts. The water-resistant cone holds up to moisture and spray in open-air installs. Mounting requires a 9.1" cutout diameter and 4.25" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.

DS18 Audio - IXS 12" Shallow-Mount Fiber Glass Cone Subwoofer, 800W RMS Single 4-Ohm

The IXS12.4S is a 12" car subwoofer from the DS18 IXS series. It handles 800 watts RMS and uses a single voice coil at 4 ohms per coil, which keeps wiring simple with most monoblock amplifiers. Peak power handling is 1600 watts. The cone is fiber glass. The shallow-mount basket fits tight spaces and under-seat enclosures where a standard-depth subwoofer will not clear. Mounting requires a 10.79" cutout diameter and 4.33" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.

DS18 Audio - SELECT 8" Subwoofer, 200W RMS Single 4-Ohm

The SLC8S is an 8" car subwoofer from the DS18 SELECT series. It handles 200 watts RMS and uses a single voice coil at 4 ohms per coil, which keeps wiring simple with most monoblock amplifiers. Peak power handling is 400 watts. Mounting requires a 7.2" cutout diameter and 3.85" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.

DS18 Audio - GEN-X 10" Subwoofer, 400W RMS Dual 4-Ohm

The GEN-X104D is a 10" car subwoofer from the DS18 GEN-X series. It handles 400 watts RMS and uses dual voice coils at 4 ohms per coil, so you can wire multiple subwoofers to the final impedance your amplifier is stable at. Peak power handling is 800 watts. Mounting requires a 9.21" cutout diameter and 5.39" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.

Specs

Be the first to ask a question.

We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.

No content
Sponsored