NVX - SQW104 600W RMS SQ-Series 10" Dual 4-Ohm Shallow-Mount Car Subwoofer - Black

The thinPRO10 is the ultimate paradox. There really isn’t anything else like it. With a mounting depth of less than 3”, if it won’t fit in the desired location, you probably aren’t putting a subwoofer there. The dual mirrored NBR spiders and axial force transfer assembly allows for unparalleled performance in a multitude of applications. The FEA optimized dual gap motor structure features a massive motor with double stacked strontium magnets. This maximizes flux density and control for an impressive 20mm of linear xmax. The honeycomb cone is made of a composite Nomex® and glass fiber, making it incredibly rigid and very lightweight. The 4.5” voice coil, available in 2 or 4 ohm, provides a powerful moving force with 750W RMS power handling. The thinPRO10 is perfect in both small sealed and ported enclosures. Sealed box sizes range from 0.25-0.8cu ft, with the sweet spot at 0.35cu ft. Ported enclosures range from 0.4-1.0cu ft, with 0.6cu ft recommended for optimum performance. Comes with Grille for added protection thinPRO10 Features 750 Watts RMS Power Handling 2.9” Mounting Depth 4.5” Voice Coil 4-Layer Winding on Vented Polymide Composite Former Protective Grille (TP10G) Honeycomb Nomex® and Glass Fiber Cone FEA Optimized Dual-Gap Motor Structure Double-Roll NBR Surround Mirrored Internal NBR Spiders 8AWG Push Terminals Vented Cast Aluminum Frame Includes Grille Dimensions: 9 1/8in (232mm) Standard 10” cutout Specifications: General Specifications: Nominal Size: 10" Nominal Impedance: 4 ohm Power Handling: 750W RMS, 2250W Peak Recommended Power range: 250W-750W RMS Frequency Response:

Experience pounding bass with this CompRT 10-inch subwoofer. This slim speaker is fewer than 4 inches deep for easier mounting. It features dual 2-ohm voice coils and employs a large-diameter, progressive-roll spider for minimal distortion. Use this CompRT 10-inch subwoofer with a sealed or ported enclosure and 400W of power.

The IXS10.4D is a 10" car subwoofer from the DS18 IXS series. It handles 600 watts RMS and uses dual voice coils at 4 ohms per coil, so you can wire multiple subwoofers to the final impedance your amplifier is stable at. Peak power handling is 1200 watts. The cone is fiber glass. The shallow-mount basket fits tight spaces and under-seat enclosures where a standard-depth subwoofer will not clear. Mounting requires a 9.25" cutout diameter and 3.66" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.