DS18 Audio - ZXI 12" High Excursion Subwoofer with Quad Stacked Magnet, 1000W RMS Dual 2-Ohm
Reviews coming soon
About this product
The ZXI12.2D is a 12" car subwoofer from the DS18 ZXI series. It handles 1000 watts RMS and uses dual voice coils at 2 ohms per coil, so you can wire multiple subwoofers to the final impedance your amplifier is stable at. Peak power handling is 2000 watts. The high-excursion motor and suspension let the cone travel farther for deeper low-frequency output. The motor uses a quad stacked magnet assembly. Mounting requires an 11.1" cutout diameter and 7.55" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.
Woofer Size
12"1000W RMS / 2000W Peak Power Handling
Rated at 1000 watts RMS and 2000 watts peak. Behind that rating: 3" voice coil on a black aluminum former wound with CCAW wire, a 224 oz ferrite motor and 32mm of one-way excursion. That is what lets a 12" cone move this much air without losing control.
Dual 2-Ohm Voice Coil
Dual voice coils let you wire multiple subwoofers in series or parallel to reach the final impedance your amplifier is stable at, which gives you room to grow the system later.
High-Excursion Motor for Deep Bass
The high-excursion motor and suspension allow the cone to travel farther than a conventional subwoofer, which moves more air and produces the low frequencies you feel rather than just hear. Give it a properly tuned sealed or ported enclosure to take advantage of it.
Fitment and Recommended Enclosure
This 12" subwoofer requires an 11.1" cutout diameter and 7.55" of mounting depth. DS18 recommends a sealed enclosure of 0.75 cu ft and a ported enclosure of 1.4 cu ft tuned to 32Hz. Check these numbers against your enclosure before ordering: enclosure volume and tuning change the low-frequency response as much as the driver does.
Quad Stacked Magnet
A quad stacked magnet assembly increases motor force, which improves cone control at high power and helps the subwoofer stay accurate instead of getting loose and boomy when driven hard.
- RMS Power1000 wattsPeak Power Handling2000 wattsImpedance2 ohmsSensitivity89.2 decibelsDual Voice CoilsYesWoofer Size12"
Reviews
This product doesn't have any reviews yet.
Compare similar products

The ZXI12.2D is a 12" car subwoofer from the DS18 ZXI series. It handles 1000 watts RMS and uses dual voice coils at 2 ohms per coil, so you can wire multiple subwoofers to the final impedance your amplifier is stable at. Peak power handling is 2000 watts. The high-excursion motor and suspension let the cone travel farther for deeper low-frequency output. The motor uses a quad stacked magnet assembly. Mounting requires an 11.1" cutout diameter and 7.55" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.

The GEN-XX12.4DHE is a 12" car subwoofer from the DS18 GEN-XX series. It handles 600 watts RMS and uses dual voice coils at 4 ohms per coil, so you can wire multiple subwoofers to the final impedance your amplifier is stable at. Peak power handling is 1200 watts. The high-excursion motor and suspension let the cone travel farther for deeper low-frequency output. The motor uses a double stacked magnet assembly. Mounting requires a 10.9" cutout diameter and 6.5" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.

Enjoy high-quality audio with this Kicker Solo-Baric L7S subwoofer that features an 12" injection-molded polypropylene woofer cone and SoloKon 360° constant-contact back bracing for optimized sonic performance. Geek Squad Installation Recommended Visit your local Best Buy store for more information.

Dominate competition lanes with the NVX XC-Series 12" high-SPL car subwoofer. Engineered for extreme air movement and window-flexing output, its triple-stacked ferrite motor, reinforced die-cast aluminum basket, and immense 30 mm one-way excursion withstand brutal low-frequency demands in high-wattage custom builds.
| Pros for DS18 Audio - ZXI 12" High Excursion Subwoofer with Quad Stacked Magnet, 1000W RMS Dual 2-Ohm | |||
|---|---|---|---|
| There were no pros for this product— | There were no pros for this product— | Sound Quality | There were no pros for this product— |
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.


















































