
Enjoy powerful sound in your study or bedroom with these flat-response Klipsch bookshelf speakers. The four-inch high-output woofer is made of stiff material for low distortion, and the one-inch titanium horn-loaded tweeter carries the highs clearly. These Klipsch bookshelf speakers handle up to 50W RMS, 200W peak for accurate music reproduction.
A: You are correct, the passive speaker must be manually connected to the powered speaker.
A: It sounds like right now you are running a 5.1 speaker set up - front left, center, front right, surround left, surround right, and a subwoofer. (The subwoofer is the .1 in the 5.1 setup). Your Onkyo receiver can power 7 speakers and run 2 subwoofers, so it is described as a 7.2 receiver. These Klipsch speakers are powered, so they are not what you need to take your system from 5.1 to 7.1. Your receiver can already power 7 speakers. Passive speakers (not powered) are more appropriate for your arrangement. The manual for your receiver gives examples of how to hook up the speakers and where to place them. Hope this helps.
A: No. They’re hardwired together. The right speaker has the amplifier and receiver built in to it. The left is just a regular speaker.
Q: Can I connect these to my iPhone? If so, how would I do that?
A: Yes, Bluetooth mode indicated by a led lit blue on speaker face, search Bluetooth devices on iPhone and connect.
A: 35 watts per channel
A: Yes you can connect your CD player directly to these speakers with either an optical cable (recommended) or RCA (red and white) plugs. Because the speakers are powered, you do not need anything else (other than plugging them into the wall for power). It does not matter that the powered speakers are Bluetooth capable - it is just one input choice that you can use or not use as you like. The Klipsch speakers let you choose which input you want to use to output sound through the speakers, so you can hook up several devices if you want to and choose which one you want to use at any time. Bluetooth is just one of those inputs. Hope this helps.
Q: Can I hook a turn-table directly to these speakers?
A: Yes, the speakers have an internal amp.
A: I would use usb , I've used all three and they all sound good but usb has higher bandwidth than the others and will have the lowest latency.