
Add enjoyment to time spent on the water with this Kicker KMC2 media center. This compact unit fits into a gauge opening on your boat, making it easy to add functionality to existing controls, and it supports multiple media types and inputs. Bluetooth connectivity lets you stream music to this Kicker KMC2 media center from compatible devices.
Q: Do the geeks install this one
A: I guess they could. It would depend if you trust them to cut a hole in whatever you’re going to put it in. The installation is really straight forward and rather easy once you have your hole cut. All the wires are color coded. DO NOT combine the remote on and the fused power wire together as one. Ensure the remote on either goes to a master power switch (like on a boat) or to the ignition switch on other vehicles. The fused power wire needs to go to a terminal block positive side (such as on a boat) or directly to the battery positive side. I used a Dremel with a spiral bit and the circle cutting fixture they have for it to cut the hole to place the receiver in. It came in a kit I had bought years earlier. Just cut slow and let the bit do the work so you get a clean cut. You can use the same tool to cut holes for your speakers if you need to.
Q: Does it come with an antenna
A: comes with plug for automotive type antenna but the antenna itself is not included you can purchase one at any auto parts store very inexpensive
Q: Is it water proof, and what are the dimensions of the receiver?
A: Yes, I believe it is water proof,, it's about 2 1/2" for the hloe in dash and a 3 1/4" or so on the face ... this is an awesome unit !!
Q: Is the USB charging ports installed in the Dashboard?
A: You can purchase the part that mounts in the dash but is not included.
Q: I don’t have a lot of room behind my dash, How deep and wide is it
A: https://www.kicker.com/kmc2 See the "specs" section in the above. Cheers!
A: undefined