A:AnswerThank you for your interest in our products. The modem should pull around 24 watts of power so the BX1000M-LM60 would provide around 2h 16m of runtime if the modem is the only thing connected to the UPS.
A:AnswerThank you for your interest in our products. Yes a BackUPS would help with power fluctuations. However if this is a laser printer there is a chance it would overload the UPS since they tend pull a bit of power. You would need to make sure what the maximum power draw is of the printer so it doesn't overload the UPS. This specific unit would support 600 watts of power connected to that. If the printer were to pull more power than that it would overload the UPS. If you need assistance in choosing an UPS please do not hesitate to reach out to an APCbySchneider sales team. We offer email and chat services through our support site. For the fastest service visit our chat at https://www.apc.com/us/en/tools/chat/.
A:AnswerA typical home router consumes about 20W of power. The 1,000VA rating of this unit is stated as 600Watts. a simple division of 20 into 600 would result in 30 hours of battery backup. I would derate this to about 25 hours as the batteries will age and overtime will not provide the original running time on battery.
Check you router power consumption by multiplying the DC voltage by the current value on the value (i.e.: 12Vx 1.5A=18W).
A:AnswerThe unit come with a ethernet (male) to usb (male) cable. The ethernet side plugs into the data port on the unit and the usb side plugs into your computer.
A:AnswerThe APC website has runtime charts for all their products. You will need to know the wattage used by your equipment.
https://www.apcguard.com/products.asp
A:AnswerDivide your connected devices power consumption (Voltage x current) into the unit's power rating. For this unit it provides 600W of UPS (backup) power.
Example, 100W load will provide up to 6 hours of backup. As it ages, the battery life diminishes over time.
A:AnswerThe APC website has runtime charts for all their products. You will need to know the wattage used by your equipment.
https://www.apcguard.com/products.asp
A:AnswerThank you for your interest in our products. The BX1000M-LM60 should provide around 2 hours of runtime. At 60 watts of power draw you would get around 1 hour and 30 minutes of runtime but the power draw from just your two modems should be lower. Since the power draw is lower the runtime would be increased.
A:AnswerYou will need to download powerchute app. Install it on the Dell. The software will give you info on how long the battery can power the devices and 3 options of shutting down.
