Questions & Answers

Q: QuestionCan you use this turntable without a speaker or do you need to have a speaker for it to work?

Asked 4 years ago by Sam.

This question was asked about the related product: Audio-Technica - Audio Technica AT-LP60X-GM Turntable Gunmetal - Black/Gunmetal

• A:Answer You need to have separate speakers since the turntable does not have its own. However you don’t need a receiver as there is a speaker connection on the back.

  Answered 4 years ago by upinsacVerified Purchase

  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionIs there a repeat function?

Asked 4 years ago by JD1997.

This question was asked about the related product: Audio-Technica - Audio Technica AT-LP60X-GM Turntable Gunmetal - Black/Gunmetal

• A:Answer No there is not.

  Answered 4 years ago by AudioTechnica

  
  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionIs the cover removable?

Asked 5 years ago by TC.

This question was asked about the related product: Audio-Technica - Audio Technica AT-LP60X-GM Turntable Gunmetal - Black/Gunmetal

• A:Answer Yes it is.

  Answered 5 years ago by HarrywsVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionDoes it have auto tone arm return or auto stop?

Asked 5 years ago by Frosty.

• A:Answer It is fully automatic. You press start and it will play the entire record and return back and turn off when it gets to the end of the record. You can choose to raise the arm, place it where you want it to start and then lower the arm.

  Answered 5 years ago by Pamela

  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWHAT DO YOU USE TO PLAY 45 RECORDS? IS THERE SOME KIND OF GADGET TO PLACE IN CENTER OF RECORD?

Asked 5 years ago by Rosalie.

This question was asked about the related product: Audio-Technica - Audio Technica AT-LP60X-GM Turntable Gunmetal - Black/Gunmetal

• A:Answer In the top left corner of the turntable there is a round indentation. There should be a round plastic piece in it with a hole in the center. This plastic piece is the size of the hole in a 45 RPM record. Place the plastic piece over the turntable spindle. Also set the record speed button on the front left to 45 and the record size lever on the bottom right corner of the turntable to 7”. Then your turntable will be set to play 45 RPM records. If your turntable is missing this round plastic piece, check if it is still in the packing box. If it is missing, contact the manufacturer.

  Answered 5 years ago by HughVerified Purchase

  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionCan I connect this via my Samsung BluRay surround sound system, that has Bluetooth capability?

Asked 5 years ago by LW51.

• A:Answer It will connect via Bluetooth. I have a Samsung soundbar and it connected to in using Bluetooth without any issue.

  Answered 5 years ago by OliverfrankVerified Purchase

  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionHow do you turn off the pre-amp, and why would you need to? Thanks!!

Asked 6 years ago by SNED.

• A:Answer There is a pre-amp selector switch located on the rear of the turntable that allows you to turn the pre-amp ON (LINE position) or OFF (PHONO position). If you are connecting the turntable to a device, such as a stereo amplifier or receiver which has a PHONO input for the connection of a turntable, the device contains its own phono pre-amp. You cannot use TWO phono pre-amps at the same time, so we allow you to turn the one in the turntable off when needed.

  Answered 6 years ago by AudioTechnica

  
  Helpful (3)Unhelpful (0)ReportAnswer this question

Q: Questionwhat is the height, length and width as I'm having a shelf made

Asked 6 years ago by Sport.

• A:Answer Allow 14 inches of height if you plan to use the dust cover. You will need 14 inches to fully open the dust cover if it is installed on the hinges. If you do not have 14 inches, you could leave the cover off of the hinges and get away with around 6-1/2 inches to remove the cover from the turntable without striking the tonearm. Allow about 16 inches on the depth for the connections on the rear to clear.

  Answered 6 years ago by AudioTechnica

  
  Helpful (5)Unhelpful (1)ReportAnswer this questionShow more answers (1)

Q: QuestionWhat's a good set of CHEAP speakers that would work great with this turntable? I'm hoping to find something under $50. I was looking at the Logitech Speaker System Z323 with Subwoofer - would they work? Or would I need something else?

Asked 6 years ago by anonymous.

This question was asked about the related product: Audio-Technica - Audio Technica AT-LP60X-GM Turntable Gunmetal - Black/Gunmetal

• A:Answer Yes, the Z323 speaker system should work fine. You may want to get a 3.5 mm stereo (TRS) to 3.5 mm stereo (TRS) audio cable in the length required for your particular setting to simplify the connection of the turntable to the right satellite speaker however. This speaker has a single 3.5 mm stereo input jack on it. The audio cable included with the turntable has dual RCA male plugs at the output end. If you use this cable, you will need a dual RCA female to single 3.5 mm stereo (TRS) mini-plug adapter cable to connect the turntable to the satellite speaker. The Analog Out jack on the rear of the turntable that this cable connects to is a single 3.5 mm stereo jack. The use of a 3.5 mm stereo (TRS) to 3.5 mm stereo (TRS) audio cable would allow you to connect the turntable directly to the speaker, no adapter cable would be needed. Be aware that there are RCA type jacks on the subwoofer that the included cable could be connected to, but the subwoofer would be so close to the turntable in this case that you can expect to have feedback problems, especially at higher volume levels and with sources that have strong bass content.

  Answered 6 years ago by AudioTechnica

  
  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionDoes the tone arm automatically return when the play is completed

Asked 2 years ago by Anonymous.

This question was asked about the related product: Audio-Technica - Audio Technica AT-LP60X-GM Turntable Gunmetal - Black/Gunmetal

• A:Answer Yes it does. The platter starts spinning when the tone arm moves over the platter, then will lift and return at the end of the record. Mine was great for the first 6 weeks. Now its junk. No anti-skate at all. The skating force causes mine to skip inward and is unusable The tone arm is factory set around 3.5 grams (mine is 3.78 g), so unless its skating your records are safe from excess wear. But if the needle can’t play more that 20 records before wearing too far….

  Answered 2 years ago by TJeepsterVerified Purchase

  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (3)

Q: QuestionThis turntable will auto connect w Yamaha Receiver's Bluetooth?

Asked 4 years ago by Roe.

• A:Answer After the initial manual paring, yes.

  Answered 4 years ago by AudioTechnica

  
  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionDoes it have an automatic replay/ repeat after the entire album play?

Asked 4 years ago by Kanzi.

• A:Answer No..

  Answered 4 years ago by ChristopherVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionCan I connect this record player to my Bose sound touch 30?

Asked 4 years ago by B94.

This question was asked about the related product: Audio-Technica - Audio Technica AT-LP60X-GM Turntable Gunmetal - Black/Gunmetal

• A:Answer Yes, using a 3.5mm male to 3.5mm male stereo cable (not included), you can connect the record player to the AUX IN connector on the back of a Bose SoundTouch 30 speaker. Make certain that the preamp selector switch on the back of the turntable is set to the LINE position for this application.

  Answered 4 years ago by AudioTechnica

  
  Helpful (2)Unhelpful (0)ReportAnswer this question

Q: QuestionI want to replace the felt mat with an acrylic one and I read that if the mat is a different thickness you had to adjust the height of the tone arm. Does this have an adjustable tone arm? How thick is the felt mat?

Asked 4 years ago by Lyn.

This question was asked about the related product: Audio-Technica - Audio Technica AT-LP60X-GM Turntable Gunmetal - Black/Gunmetal

• A:Answer No, it does not have adjustable arm height. Consider the AT-LP140XP Turntable instead. Please note that the AT-LP140XP is a fully MANUAL turntable however, there are NO automatic functions. Also, it DOES NOT have a built in phono preamplifier. The felt mat provided with the AT-LP60X Turntable is 1/8" (3.175 mm) thick.

  Answered 4 years ago by AudioTechnica

  
  Helpful (2)Unhelpful (0)ReportAnswer this question

Q: QuestionI want to digitize the records. Can I connect the output to my PC 's microphone input. If so, what type of connector is needed.

Asked 4 years ago by ZygZag.

• A:Answer It depends. The turntable is producing an RIAA equalized LINE level signal when the phono preamp inside it is used. If your computer is an Apple computer, the 3.5mm AUDIO IN jack on it can typically be designated as either a MIC input or as a LINE input. You need a LINE input. This may or may not be the case on a Windows computer. If the the input is a MIC input ONLY it is not going to work, the line level signal will overdrive the input and the sound will be distorted a a result. Since this type input is 3.5mm stereo mini-jack, you will need either a dual RCA (females) to single 3.5mm male stereo mini-plug adapter to adapt the supplied audio cable to the computer, OR you can use a different cable all together, one that as 3.5mm male stereo mini-plugs at each end. The Analog Out jack on the back of the turntable is the 3.5mm stereo (TRS) type jack. The audio cable that we supply with the turntable is the 3.5mm stereo mini-plug to dual RCA (males) type cable.

  Answered 4 years ago by AudioTechnica

  
  Helpful (2)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes this turntable have a pitch +- adjuster?

Asked 4 years ago by Jobu.

• A:Answer No it does not, consider our AT-LP120XUSB Turntable instead if you need a pitch adjustment. Please note that the AT-LP120XUSB model is a fully manual type turntable, there are no automatic functions.

  Answered 4 years ago by AudioTechnica

  
  Helpful (2)Unhelpful (0)ReportAnswer this question

Q: Questiondoes this turntable have an automatic stop at the end of the record

Asked 5 years ago by Anonymous.

• A:Answer You can get many answers on the Audio Technica site (www.audio-technica.com) ... But yes, to your answer. These "fully automatic" units usually means that you press start, the turntable spins, you move arm over record and use the 'lever' on the arm lifter to lower the arm/stylus to the record. You can manually lift in the same way at any point to reset where it plays. At end of record, arm automatically lifts and motor shuts off, but arm does not return to rest point, you would do that manually. Simple design means less to go wrong!

  Answered 5 years ago by fischnetVerified Purchase

  Helpful (3)Unhelpful (1)ReportAnswer this questionShow more answers (5)

Q: QuestionCan this connect to a bluetooth soundbar and play the records through the bluetooth connection?

Asked 5 years ago by JG10.

• A:Answer Yes, any bluetooth speaker can be paired with this turntable

  Answered 5 years ago by Cdj26xVerified Purchase

  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionHow many 45's can you play/load at one time? Does this include an accessory for the 45's?

Asked 5 years ago by Anonymous.

• A:Answer One, there is no provision for stacking records. An adapter is provided for 45 rpm records which have the larger (1.5 inch) center hole.

  Answered 5 years ago by AudioTechnica

  
  Helpful (2)Unhelpful (0)ReportAnswer this question