Questions & Answers

Q: QuestionWhat does F-3 mean on microwave over the top

Asked 6 years ago by Mike.

• A:Answer Hi Mike - Thanks for reaching out to us regarding your GE microwave. We are sorry to hear of the F3 Fault Code (F3= Shorted touch pad panel). These codes help our technicians quickly diagnose issues with the microwave oven. In the event that the electronic control displays a fault code, a trained Service Technician should be called to diagnose and correct the issue. Before scheduling service, please try a reset by unplugging or turning off power at the circuit breaker for 30 seconds or so. See MICROWAVE ERROR, FAULT OR FUNCTION CODES: https://products.geappliances.com/appliance/gea-support-search-content?contentId=16575 - To schedule service online, visit us at GEAppliances.com or call GE Appliances at 800.GE.CARES (800.432.2737). Please have your serial number and your model number available when calling for service. We hope the reset works! Keep in touch. Sue

  Answered 6 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhen stove top vent fan speed is high, will it be reduced automatically when microwave is on? If yes, after microwave is off, will vent fan speed return to high?

Asked 6 years ago by Anonymous.

• A:Answer Hi - Thanks for your interest in GE® 1.9 Cu. Ft. Over-the-Range Sensor Microwave Oven JVM7195SKSS! This model has a four-speed, 400-CFM venting fan system to quickly remove smoke, steam and odors from the cooktop to keep kitchen air fresh and clean. Press Vent Fan once for boost fan speed, twice for high fan speed, a third time for low fan speed or a forth time to turn the fan off. The selected fan speed will not change or reduce in speed when the microwave is in use. Keep in touch at GEAppliances.com. Sue

  Answered 6 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhen I look at built in microwaves per the link provided it actually goes to counter top units ( https://products.geappliances.com/appliance/gea-category/microwave-ovens?TYPE=Built-In). So counter top units can be used inside a cabinet?

Asked 6 years ago by Inquiringmind.

• A:Answer Hi Inquiringmind - Thanks for checking back with us and for your interest in GE! Yes, select GE Appliance countertop microwaves are Built-In Ready. A matching trim kit is required to install the unit as a Built-In Microwave. Check the Related Parts & Accessories tab of the model details for the trim kit that works with each microwave. Keep in touch at GEAppliances.com. We are always eager to help with appliance selection. Sue

  Answered 6 years ago by GE Answers

  
  Helpful (1)Unhelpful (1)ReportAnswer this question

Q: QuestionHow much does this microwave weigh?

Asked 6 years ago by Tom.

• A:Answer Hello Tom - Thank you for your inquiry; we are glad to assist. The microwave model JVM7195SKSS weight is 55 lb. We appreciate your interest! Thanks for checking. Olga

  Answered 6 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionDo the over-the-range models mount in a cabinet as we are needing to replace a unit above our oven in a wall cabinet.

Asked 6 years ago by Inquiringmind.

• A:Answer No. I do not believe so. This model is designed to mount over a range/stove and attach to an upper cabinet on top. It is not designed to mount inside a cabinet.

  Answered 6 years ago by SuperGeekVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionDoes this microwave come with 2 different mounting brackets? One for a smaller cabinet and one for a larger one?

Asked 6 years ago by Tippy.

• A:Answer No, this unit has just the one mounting bracket

  Answered 6 years ago by twig1980Verified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (3)

Q: QuestionHi i am replacing a ge spacemaker xl 1400 model no jvm1440bd002 what would be my best replacement model at this time?

Asked 6 years ago by Jojo.

This question was asked about the related product: GE - 1.9 Cu. Ft. Over-the-Range Microwave with Sensor Cooking and Steam Cleaning - Black

• A:Answer Hi Jojo - Model JVM7195DKBB is a great choice. You'll love the easy-clean, dark gray enamel interior with steam clean option. All 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. Therefore, any of our 30" over-the-range models will work as a replacement for an existing 30" over-the-range model. Check out the Quick Specs at the following link for dimensions: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=JVM7195DK_C3.pdf - (JVM1440BD002: Approx. Product Dimensions (WxHxD) (in.) 29 7/8 in x 16 1/2 in x 14 5/16 in). WE certainly appreciate your loyalty! Sue

  Answered 6 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI am interested in this microwave (in Slate) to match the other new Slate GE appliances in my kitchen but I don't have an External vent (it is not listed as a Convertible Vent) - is there a kit that will allow it to work without an external vent?

Asked 6 years ago by BobF1999.

This question was asked about the related product: GE - 1.9 Cu. Ft. Over-the-Range Microwave with Sensor Cooking and Steam Cleaning - Slate

• A:Answer This microwave has either an external or recirculating vent. Instructions are clear and conversion takes very little time.

  Answered 5 years ago by Buzzard

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: Questionwhat material is the handle? I am concerned about it being stainless and getting hot to touch over the range.

Asked 6 years ago by Arena.

• A:Answer Hi Arena - For safety reasons, we use a plastic handle with electroplated metal finish on the over-the-range microwaves. Therefore, the handle does not get hot when using the range. Thanks for choosing GE! Sue

  Answered 6 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWHY DOES DISPLAY GO ON AND OFF SEE PHOTOS

Asked 6 years ago by Anonymous.

• A:Answer Hi - This model has a Display On/Off feature. To turn the clock display on or off, press and hold Display On/Off button for about 3 seconds. See page 19 of the Use and Care Manual at the following link: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-40766-2.pdf - Keep in touch at GEAppliances.com - Sue

  Answered 6 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWe are replacing a GE, that one was fairly quiet. Have they even gotten better with fan noise?

Asked 6 years ago by Robr.

• A:Answer Apparently not - my wife has already requested and scheduled an appointment to check out the fan noise

  Answered 6 years ago by GeorgeVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (3)

Q: Questionis this control panel back-lit?

Asked 6 years ago by wheaten45.

• A:Answer Hello Wheaten45. The control panel is not backlit. Thanks for checking. Olga

  Answered 6 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: Questionis the control panel on this microwave lit...or is there an option to light it

Asked 6 years ago by tivelsmom.

• A:Answer Hello Tivelsmom. The control panel is not backlit. There is not an option to light the control panel. Thanks for checking. Olga

  Answered 6 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionLooking to purchase this microwave to replace my 36 inch GE model JVM3670sk04. I understand I need the filler piece. Can you confirm which filler piece will fit this?

Asked 6 years ago by Megan.

• A:Answer Hi Megan - Model JNM7196SKSS is compatible with Optional 36" Side Filler Panel Kit JX36DSS. You can view the Installation Guide at the following link: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-40720-4.PDF - We certainly appreciate your loyalty! Enjoy - Sue

  Answered 6 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI'm replacing a microwave that measures 16.9 in height and 18.4 in depth, What would you recommend to replace it with that won't mess up my backsplash which comes up to the back of the microwave?

Asked 6 years ago by Dawn.

This question was asked about the related product: GE - 1.9 Cu. Ft. Over-the-Range Microwave with Sensor Cooking - Black Stainless Steel

• A:Answer Hi Dawn - GE® 1.7 Cu. Ft. Over-the-Range Sensor Microwave Oven JVM6175BLTS and GE® 1.9 Cu. Ft. Over-the-Range Sensor Microwave Oven JVM7195BLTS (Black Stainless) are 16 1/2"H x 15"- 15 1/2"D. You can view the Quick Specs with dimensions at the following links: (JVM6175): https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=JVM6175SK_EK_C3.pdf - (JVM7195): https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=JVM7195SK_EK_C3.pdf - Explore our Black Stainless Appliances at https://www.geappliances.com/ge/black-stainless-steel-appliances.htm - Thanks for choosing GE! Sue

  Answered 6 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI have a GE microwave model No.JVM1860Sf001. What current model would replace this model to fit in the same space?

Asked 6 years ago by Clare.

• A:Answer Hello, all 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. Therefore, any of our 30" over-the-range models will work as a replacement for an existing 30" over-the-range model. As a note, when replacing an over-the-range microwave, the mounting bracket included with the new microwave should be used since the mounting bracket is specific to each model. The new screws, bolts, and exhaust adapter should also be used. You can find more about product and cabinet dimensions in the quick specs, linked here: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=JVM7195SK_EK_C3.pdf The model you are looking at would be a great replacement! To see more information about that microwave, please see the use and care manual here: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-40766-2.pdf The model has similar sensor controls as your previous microwave, such as: Popcorn, Beverage, Potato, Melt, Reheat, and Defrost: Weight/Time. Additionally, this microwave comes with great features such as: Steam Clean, Power Level Adjustment, and a Vent Fan. I hope this helps! -Chris

  Answered 6 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs the digital display on this model green? or white? LED.

Asked 6 years ago by DKos1.

• A:Answer White

  Answered 6 years ago by JulioVerified Purchase

  • 
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionNeed to replace HVM1750DM1CC-do I need to order JVM7195SKSS OR JNM7196SKSS? Thanks

Asked 6 years ago by PJ.

• A:Answer The microwaves appear to be different cu ft. I would check the dimensions of each unit. I replaced an old GE microwave that had the same dims and cubic feet and was able to reuse the wall bracket. It was an easy installation.

  Answered 6 years ago by KrobVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: Questionneed to buy a ge profile microwave model JNM71965KSS. Looks like you have them on sale for approx. $60 off the $420 price. Just want to carry the unit out of store,will be self installed. Pls advise if stainless steel model will be available thru S.

Asked 6 years ago by 1492.

• A:Answer Hi there, We would recommend that you contact your local Best Buy for questions related to a certain store and appliance availability. You should be able to contact Best Buy online through their Contact Us page, here: https://www.bestbuy.com/site/customer-service/contact/pcmcat1511375025410.c?id=pcmcat1511375025410 - Also, the correct model number is JVM7195SKSS. Thank you very much for your question. We hope that this helped. -MS

  Answered 6 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question