A:AnswerHi - Thank you for reaching out to us. The Heavy and Everyday cycles on this dishwasher incorporate a dry period at the end of the wash cycle automatically. There isn't a separate button to push for heated dry. We hope this is helpful. Kind regards - Vikki@GEAppliances
A:AnswerHi - Thank you for reaching out to us. To select the Heavy cycle, press and hold the Start pad for 3 seconds to change the cycle. A green light under the words Heavy Cycle will light up to let you know it has been selected. We hope this is helpful. Please contact us again if you have additional questions or concerns. Kind regards - Vikki@Hotpoint
A:AnswerHello - We understand your concern about your dishes not being dry and the length of your cycle. For help with these issues, we recommend you follow the troubleshooting steps found in the "Dishes don’t dry" and "Long cycle times" sections on pg. 20 of the Owner's Manual. You can locate a copy of your Owner's Manual on the product homepage in the "Features" section under "Manuals & Guides." Thank you for being part of the Hotpoint family. All the best. -Don@GEAppliances
A:AnswerHey there - As per the Installation Instructions, which can be found in the "From the Manufacturer" section of this product page, the dishwasher must be fully enclosed on the top, sides and back, and must not support any part of the enclosure. For any additional questions about this dishwasher model, we recommend looking through the same Installation Instructions previously mentioned. Kind regards. Julia@Hotpoint
A:AnswerHello – thanks for reaching out. This model does not come with an insulation blanket and does not have insulation such as Bitumen or Mastic. We hope this is informative and please let us know if you have any other questions. Take care. Lauren@Hotpoint
A:AnswerHey there – that’s a great question. This model does not come with an insulation blanket and does not have insulation such as Bitumen or Mastic. We hope this helps in your decision making! Lauren@Hotpoint
A:AnswerHey there,
Thank you for reaching out. This model dishwasher is only available in the standard black color. We hope this helps. Reach out if you have more questions. Mike@GEA
A:AnswerHey there, we're more than happy to help you with your new dishwasher. This dishwasher has the heat/dry cycle but we're sorry to say that this cycle is not an option. The only way for you to not utilize this cycle is to cancel/stop the cycle as soon as you hear the wash/rinse cycle ends. We apologize for this inconvenience; we know that it is disappointing to hear that you're not able to disable this cycle. When the Start button is pushed on this model, the “START” LED (status light indicator) comes on and stays on. At the end of the cycle, the “START” LED will turn off. There is no buzzer on this model. We hope this information helps, and we encourage you to reach out to us directly should you have additional questions. -Kacie@GEA
A:AnswerHi there! When it comes to dishwashers, the dBA is the decibel rating for the loudness of the unit. The lower this rating is, the quieter the dishwasher will be. This dishwasher has a rating of 60, which is similar to moderate rainfall. We hope this is helpful! Have a wonderful day. -Gina@Hotpoint
A:AnswerVery basic control. One touch start button. To get heavy wash hold start button until heavy wash circle lights up. To cancel open door to stop then hold start button for 3 seconds and close door.
A:AnswerThis sounds like you need to take this up with your apartment. It was obviously install incorrectly and it is up to who purchased it to take corrective actions. Tell your apartment to replace it or have it fixed.