Questions & Answers

Q: QuestionWill a 1/4 barrel, a 1/6 barrel and the CO2 all fit inside?

Asked 7 years ago by Ryan.

• A:Answer Yes, they will. Attached is an image from the manual that shows what will fit. Two 1/4 kegs won't fit, but a 1/4 with a 1/6 should. I usually have two 1/6 in mine. I have the CO2 on the outside, but it should fit inside with a 1/4 and a 1/6. Hope this helps!

  Answered 7 years ago by GusmanVerified Purchase

  • 
  Helpful (7)Unhelpful (1)ReportAnswer this questionShow more answers (3)

Q: QuestionWhat is the temperature range in the settings in Fahrenheit? Minimum to maximum. I want to know if it would be capable of setting the temperature for the fermentation process when brewing beer. Thanks if anyone knows.

Asked 7 years ago by Sudzman.

• A:Answer I plan to use it for this and will have an Inkbird temperature control unit for fermenting. Plug the refrigerator power into the Inkbird and it will kick on the refrigerator until it reaches your desired temp. Once it does it cuts power to the refrigerator until it exceeds that temp again. Advanced Inkbirds have two outlets for both a heating pad and the refrigerator. On my current refrigerator the Inkbird kept my lager fermenting at 55F +/- 1F perfectly. Then when not fermenting I'll just use the refrigerator as designed.

  Answered 7 years ago by rickNP

  Helpful (3)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionHi, I am having dificulties attaching the coupler to a petainer keg. It seems the coupler is too short,, i read that there are 2 kind of type d coupler, 19mm and 20 mm. Anybody which one this kegerator comes with?

Asked 6 years ago by Emmanuel.

• A:Answer You can just replace the coupler for a bigger one. Actually for comercial kegs with a d coupler a never seem a different size. But you can take your couple to any brewing store and they definitely will have a replacement for it if it’s the case.

  Answered 6 years ago by BreezyVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionCan you run with just one keg connected and turn off gas to tap not in use?

Asked 8 years ago by NjBob.

• A:Answer No. However, it is very straightforward to remove the second tap from the gas line if you plan to generally run with just a single keg. You can also leave an empty keg hooked up.

  Answered 8 years ago by JS99Verified Purchase

  Helpful (3)Unhelpful (0)ReportAnswer this questionShow more answers (5)

Q: QuestionWhat combination of keg sizes does it hold at the same time besides two 1/6 kegs? Can it hold a 1/4 keg (short or Slim) and a 1/6 keg? Can someone verify? Upload a picture if possible.

Asked 8 years ago by B33R.

• A:Answer It can hold a 1/4 slim and a 1/6 at the same time...hope this helps

  Answered 8 years ago by CavesideVerified Purchase

  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (4)

Q: QuestionIs the tower 2.5" or 3" in diameter?

Asked 8 years ago by DB.

• A:Answer The tower is 3 inches diameter, and stands 13 inches tall from the mounting flange. Made of steel with a satin black finish and a chrome top cap. Also has a chrome escutcheon at the base.

  Answered 7 years ago by MegaVerified Purchase

  Helpful (3)Unhelpful (0)ReportAnswer this question

Q: QuestionI assume this is smudge-proof, but I was wondering if the Black Stainless Version is scratch-resistant, also? I’ve heard of some black stainless appliances showing scratching very prominently.

Asked 6 years ago by Ames.

• A:Answer I have not had any issues with the finish being scratched but haven’t done anything to cause that problem yet.

  Answered 6 years ago by WDeBord72Verified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWhat is the entire temperature range?

Asked 8 years ago by Grover02.

• A:Answer 32F to 50F on my 2-Tap digital model.

  Answered 7 years ago by LGSYSTEM

  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionRoughing in power for home bar, read all reviews find nothing on power requirements . Does it plug in or hard wire ?

Asked 6 years ago by frankie.

• A:Answer It's a normal plug.

  Answered 6 years ago by Louisville10Verified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionDO I NEED TO BUY A KEG WITH SANKEY COUPLER TO COMPLETE IT?

Asked 7 years ago by JAY.

• A:Answer Not necessary. The two Tap comes with a complete kit that includes Unfilled CO2 tank, tubing, Sankey coupler.

  Answered 6 years ago by ElenaVerified Purchase

  • 
  • 
  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (4)

Q: QuestionWill this take Samuel Addams kegs

Asked 7 years ago by 0586beat.

• A:Answer That will take any keg. You have to know what kind of keg it’s and maybe replace the couplers and those can be found at any brewing store

  Answered 6 years ago by BreezyVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionCould this hold three 1/6th kegs?

Asked 7 years ago by John.

• A:Answer No, unfortunately not enough space for three, two is all you can get in there.

  Answered 7 years ago by MikeVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionIs the temperature settings digital, that shows actual degrees? Also is the temp display in the front of unit and able to read easily? i don't want a knob that says 4, and guesstimate at the temperature.

Asked 7 years ago by rangerjbdejo.

• A:Answer The digital readout in front of the refrigerator is the temperature you want the temperature to be at. Not nessecerally the actual temperature inside. You can buy a thermometer for the inside if you don’t believe the readout. I don’t have a thermometer inside but the beer seems cold enough. It is however, easy to read. No knob that says 4. FYI, I am delighted with this unit.

  Answered 7 years ago by BigAlVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (3)

Q: QuestionI have a three season porch that reaches temperatures between 90 to 100 degrees when closed up will this unit function properly there or will it keep running and burn out .

Asked 7 years ago by Anonymous.

• A:Answer No, ambient temperature below 50°F (10°C) or above 85°F (29.4°C) will hinder the performance of this kegerator.

  Answered 7 years ago by CommunityAnswer

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionDoes this unit come with Ball Lock or Pin Lock keg couplers in addition to the D system (domestic) coupler? Thanks. I suspect the answer is no and adapting the correct Korney Keg coupler is a simple matter.

Asked 7 years ago by BigKahuna.

• A:Answer You are correct. The kegerator only comes with commercial keg couplers. You need to purchase korney keg couplers separately, but it’s very easy to switch out.

  Answered 7 years ago by AJFratVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionCan anyone tell me the diameter of the tower? 2.5", 3", or...?

Asked 8 years ago by Brewhaha.

• A:Answer The outside diameter is 3 inches.

  Answered 8 years ago by PolarbearVerified Purchase

  Helpful (3)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWhat is total height from floor to the top of the tap handle?

Asked 8 years ago by EZPo.

• A:Answer Approximately 52" from bottom of the wheels to the included tap handle top.

  Answered 8 years ago by AnonymousVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this item be restocked?

Asked 5 years ago by Anonymous.

Q: QuestionWhat is the size/diameter of the beer line?

Asked 5 years ago by Bigsky.