A:Answermfiman, The main difference is the lateral adjustment of the PMX series. You can move the articulating arms of the mount left or right and get your TV situated perfectly if your studs aren't in the ideal location. The second difference is tool-less tilt, you need a wrench to adjust the PDX whereas you only need to move a lever on PMX. Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.
A:AnswerRon,
This mount, the PDX680, accommodates up to 24" studs. The smaller version of this mount, the PDX650, can only accommodate up to 16" studs. Contact us directly using the support button on our site if you have any other questions, thanks.
A:AnswerMountain Girl,
The PDX680 has a wall plate that can accommodate 24" stud spacing. The PDX650's wall plate can accommodate 18" spacing at the most. The PDX680 can also pull out 24" from the wall versus 22" on the PDX650. Feel free to contact us directly at [email protected] if you have any other questions, thanks.
A:AnswerJFlo,
We rate our mounts conservatively so as long as your TV is under the 125 lb weight capacity you should not experience any flex over time. Feel free to contact us directly using the support button on our site if you have any additional questions, thanks.
A:AnswerUnfortunately the PDX680 is not meant for outdoor use. For outdoor use we would recommend either the PDX650G or the PDX700G. If you have any other questions or require additional information, if you could please email us directly at [email protected] and we would be happy to help.
A:AnswerGaryS,
There will be 2" between the wall and the rear of your TV if you do not have to use any spacers in your installation. The XBR-75X940D has a compatible 400x300 VESA pattern and is under the weight capacity of the PDX680, should work great! Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.
A:AnswerI purchased this for a 77” LG OLED.
I was told the mount was rated for more than the 77” OLED and this mount would work.
I had the OLED mounted by BBY. I ended up having them come back out and used a Rockfish full motion mount I already had previously purchased.
This mount does not have screws to lock the Tilt or Leveling.
It was also too stiff to pull out the OLED and if I did the level or tilt would move a lot!
I can’t recommend this mount for any TV but especially not an OLED!
A:AnswerYour TV has a compatible VESA pattern of 200mm x 200mm and is under the weight limit of 125 lb, it should work great! If you have any other questions or require additional information, if you could please email us directly at [email protected] and we would be happy to help.
A:AnswerYour TV has a compatible VESA pattern of 600mm x 400mm and is under the weight limit of 125 lb, it should work great! If you have any other questions or require additional information, if you could please email us directly at [email protected] and we would be happy to help
A:AnswerYes you can. Even though the PDX680 doesn't have a tilt knob you can tension the tilting mechanism so that it will keep your TV in place wherever you adjust it. It might take a bit of time to dial it in perfectly but you can tilt on the fly once it's setup correctly. Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.
A:AnswerNo it doesn't. I installed mine a couple of days ago, so the details are fresh in my memory. Nothing mentioned in the owner's manual and no extra parts were left over. As long as the thief had a hex nut wrench or a decent pair of pliers, they could remove the two bolts that secure the connection between two parts of the mount (the wall piece and the tv piece).
A:AnswerNancy,
We can only recommend the installation methods that are in our manual using the provided hardware to install into wood or concrete walls. Metal studs are hollow and do not provide the structure necessary for our lag bolts to grip into. For this type of installation we recommend consulting a professional installer to determine if your wall is able to safely hold the weight of the mount and TV, and how to install correctly. If you have any other questions please contact us directly through the support tab on our website and we'll be happy to help.
A:AnswerYour TV has a compatible VESA pattern of 300mm x 200mm and is under the weight limit of 125 lbs; it should work great! If you have any other questions or require additional information if you could, please email us directly at [email protected], and we would be happy to help
