A:Answersteve,
Your TV has a compatible 400x200 VESA pattern (bolt pattern) and is under the weight capacity of the M300 so it should work well. Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.
A:AnswerMonty419,
Your TV has a compatible 200x300 VESA pattern and is under the weight limit of the M300, should work well. Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.
A:AnswerIf the TV is 100mm x 100mm, 150mm x 100mm, 200mm x 100mm, 200mm x 300mm, 200mm x 400mm, 300mm x 200mm, 300mm x 300mm, or 400mm x 400mm Vesa compatible the mount will work.
A:AnswerJOECROW,
Your TV has a compatible 200x200 VESA pattern (bolt pattern) and is under the weight capacity of the M300 so it should work. Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.
A:Answerso far I have put 2 insignias on this mount. 24 and 32" no problems, holes line up the same on both. the kit comes with several screw, bolts, arm extenders that all mount on plate for various size tvs. i would say yes.
just check mount plate against tv first, if it didn't i am sure you could return it.
A:AnswerSarah,
Your TV has a compatible VESA pattern of 200x300 and is under the weight capacity of the M300 so it should work well. Keep in touch using the support button on our website if you have any additional questions, thanks.
A:AnswerSarahJ,
Your TV has a very common 200x200 VESA pattern (bolt pattern) and is under the weight capacity of the M300 so it should work well! Feel free to contact us directly using the support button on our web site if you have any additional questions, thanks.
A:AnswerRach,
Your TV has a compatible 200x200 VESA pattern (bolt pattern) and is under the weight capacity of the M300 so it should work. Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.
A:AnswerPhilip,
The wall plate of the M300 is 2-3/4" wide by 11-3/4" tall. The TV plate is around 8" by 8". Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.
A:AnswerI have only used it on Insignia 40" and 43" screens but I'm sure it would work fine on a Samsung. They give you a lot of bracket options and mounting screws. I really like this mount and highly recommend it.
A:AnswerThis mount extends a full 20" from the wall, which is the longest extension I found for a big TV. This means that a TV that is less than 20" from the middle to the edge (40" across) would angle a full 90 degrees. A 48" diagonal TV screen could have a screen that is 40" wide, or less, but you would have to measure the width including frame. It would be close.
A:Answersummer210,
Your TV has a compatible 400x400 VESA pattern (bolt pattern) and is under the weight capacity of the M300 so it should work well. You may need longer bolts than what is supplied, we can send these if you encounter an issue during installation. Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.
A:AnswerFillip, Your TV has a compatible 200x200 VESA pattern (bolt pattern) and is under the weight capacity of the M300 so it should work well. Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.
