Questions & Answers

Q: QuestionWhat type of output does this module have?

• A:Answer This module has both single-pulse and double-pulse ground outputs.

Q: QuestionWhat types of vehicles is this bypass module compatible with?

• A:Answer This bypass module is compatible with RVs, off-road, and exhibition vehicles.

Q: QuestionDoes this module emulate a parking brake signal?

• A:Answer Yes, this module emulates a parking brake signal.

Q: QuestionHow is this module installed?

• A:Answer This module can be installed in a few simple steps.

Q: QuestionWhy would I need this bypass module?

• A:Answer This module makes recreational, off-road, or exhibition vehicles street-ready.

Q: QuestionI have a Alpine ilx w650 with only the parking brake wire yellow/black, no foot brake wire. I take I would leave the green wire disconnected and just connect the other wires?

Asked 5 years ago by Slinky.

• A:Answer Correct

  Answered 5 years ago by Stavi

  Helpful (7)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionCan I get this installed by the Geek Squad at Best Buy?

Asked 5 years ago by Anthony.

• A:Answer Yes

  Answered 5 years ago by Mike

  Helpful (2)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes this also work on a JVC or Kenwood?

Asked 5 years ago by Inpalajim.

• A:Answer Universal has instructions for all radios

  Answered 5 years ago by Gee611Verified Purchase

  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWhat does this bypass? What does it let me do that I couldn't do without it?

Asked 2 years ago by ROYBOY1015.

• A:Answer It lets enable you to access your headunits bluetooth, aux, AV, etc. without having to have your parking brake engaged. So you can use your headunit while in motion.

  Answered 2 years ago by JoelM

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionHow does it work

Asked 5 years ago by Jkin6982.

• A:Answer Some head units require a signal from the parking brake switch. The switch grounds the lead when the brake is applied. This signal is used to prevent you from being distracted by video or by messing with the settings while you're driving, by disallowing certain actions when the brake is not applied. But because it would be trivial to just ground the parking brake wire on the head unit, many of them force you to start the engine (or switch to ACC position), then release and reapply the brake, before the settings menu can be entered. This unit connects in place of the wire to the parking brake switch and emulates the parking brake being set, released, and set again. In my case, I didn't want to release the brake until I was ready to move the vehicle, even momentarily. So I didn't want to connect the brake wire as the head unit requires. This little unit does the job.

  Answered 2 years ago by Matt

  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionDo i need this if im just installing a single din pioneer head unit that doesn't play videos?

Asked 1 year ago by Justme123.

Q: QuestionWill this work on a Boss Audio BE7ACP stereo?

Asked 1 year ago by Abby.

• A:Answer No need on that unit, just connect your parking brake wire with the ground wire so they both go to ground

  Answered 1 year ago by CorNut

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work with alpine ilx f511? What wires do I use and are they the wires directly coming out of the unit like the first group of wires or later in the harness?

Asked 1 year ago by Mrbrah.

Q: QuestionHow many watts and ohms is the resistor

Asked 2 years ago by Sal.

Q: QuestionDoes this allow a passenger to watch a DVD?

Asked 2 years ago by ROYBOY1015.

• A:Answer Yes

  Answered 2 years ago by Gardnerboy81Verified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work on my 2008 350Z, I will have a double din pioneer in it soon.

Asked 2 years ago by Fidel.

• A:Answer Yes it will. You wont need the yellow wire for pioneer HU. If you have a newer pioneer you can do this https://youtu.be/DMzO0ADI3bQ

  Answered 2 years ago by JoelM

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes this fit on dmh pioneer double din on 2004 mercury grand marquis

Asked 2 years ago by Justin.

• A:Answer Hello,I have run this on alpine models with no problems and have seen it works the same for all radios.The only difference from unit to unit is the actual color on the trigger reverse coming out of the radio.On my last install of this bypass for the alpine ilx-650 i only used 3 of the 4 wires and didn't use the footbrake wire at all.hope this helps

  Answered 2 years ago by Anonymous

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this bypass work with my Boss Multimedia system and my F-150 ?

Asked 5 years ago by elmerl.

• A:Answer Should as long as you read install setup online

  Answered 5 years ago by Gee611Verified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work with the dual xdvd176bt on a hyundai tiburon gt 2.7l

Asked 6 years ago by 5594648584.