Questions & Answers

Q: QuestionWhen u install a out put converter do u have to splice into how many wires

Asked 7 years ago by Rayjr2010.

• A:Answer If you want an simple install you can just splice into 2 wires, pick a side and splice both positive and both negative into one speaker, but to do it correctly you would splice into both left and right positive and negative wires

  Answered 7 years ago by Jhosko

  Helpful (16)Unhelpful (12)ReportAnswer this question

Q: QuestionHow much would it cost to get this installed?I bought this product and was curious as to how much it would cost to get this installed into my 2009 dodge journey.

Asked 10 years ago by Dakota.

• A:Answer It was no more than 20.00

  Answered 10 years ago by Danielle

  Helpful (3)Unhelpful (0)ReportAnswer this questionShow more answers (4)

Q: QuestionWhat do you hook the the R gain and L gain spots on the loc?

Asked 8 years ago by Nick.

• A:Answer I could be wrong but, if this is a 2 channel LOC, then you'd be feeding in 2 audio differential sources. This would make sense if you're getting music from both the Left and Right channels (front or rear, though I'd suggest the front for better quality). To answer your question, the R and L gain apply different levels of gain to their channel respectfully. It's not normal that the audio levels of the Left channel to be wildly different from the Right but, if they are, these knobs would allow you to balance this. Hope this helps.

  Answered 7 years ago by BeauRo

  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWhy is there 2 brown wires ,do you ground both of them

Asked 5 years ago by LXGEE.

• A:Answer You can use them as grounding but not necessity for full function

  Answered 5 years ago by TechJunkieVerified Purchase

  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionHow much is it and dose in the store

Asked 7 years ago by Yvang.

• A:Answer It doesn’t store anything. It just reduces the strength of the speaker output so that you can feed it into a device requiring a lower level signal. Period. End of story.

  Answered 7 years ago by NickNameRequiredWhatNonseVerified Purchase

  Helpful (2)Unhelpful (0)ReportAnswer this question

Q: QuestionIs I compatible with a 2018 Dodge ram Truck

Asked 3 years ago by Anonymous.

• A:Answer Yes just tap into the rear door speaker wires and be sure to connect to a ground works amazingly even better than the lc2i look on gen 4 ram forums to find the color speaker wire you’ll need to tap

  Answered 3 years ago by 2019ram1500classicVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionIs this compatible with a 2015 GMC Sierra with the bose setup?

Asked 5 years ago by dmccoig.

• A:Answer its just a line out converter, its compatible with any speaker wires. it just converts the signal it RCA outputs, for adding an amplifier.

  Answered 5 years ago by jonbo223Verified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWith this product do I need a remote wire to power the amp if I use this product and if so where do I connect the remote wire to stock head unit?

Asked 6 years ago by Bigmike251.

• A:Answer You will need to run a remote wire in addition to the line output converter. You can access your vehicles fuse panel and splice into any circuit that is switched on with the ignition. I would recommend using a t splice and if capable solder your connection.

  Answered 6 years ago by Audiophilia

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWould this work for a 2013 ford explorer to hook my amp to the factory sync radio

Asked 6 years ago by Bolo.

• A:Answer Yes...you need to tap the left +/- and right +/- speaker wires for either your left/right front or left/right rear speakers and then running speaker wire extensions to where you'll mount the amp and then solder those extensions to the LOC wires... if you can find a wiring diagram for your vehicles head unit then you can tap directly from the back of the head unit and avoid having to run speaker wire extensions and can possibly hide the LOC behind the dash somewhere

  Answered 6 years ago by AnonymousVerified Purchase

  Helpful (3)Unhelpful (2)ReportAnswer this questionShow more answers (1)

Q: QuestionIt sys max power is 50watts. Does this mean i have to get a different Line Output Converter if i am sending 1500watts to my subs? or is it not relevant.

Asked 7 years ago by sm.

• A:Answer No. You will need to adjust the output of the converter so that it doesn’t overload your amp input.

  Answered 7 years ago by AHolder

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWill this fit my 1998 bmw 318i ?

Asked 9 years ago by quintana.

• A:Answer Yes that shouldn't be a problem. i have one in my 2008 BMW, it just takes speaker inputs and converts them to an RCA output. If your car has stock speakers you can use this.

  Answered 8 years ago by SethVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWhat plugs in to the rca jacks on the metra.Thanks

Asked 9 years ago by str8up2.

• A:Answer The RCA jacks are for your RCA cable leading to your amp. Most aftermarket head units come with RCA ports in the back of them. This just makes it so those that want to keep their head unit that doesn't have RCA as an option.

  Answered 9 years ago by JMC2543

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionWhere can I get it to buy

Asked 1 year ago by Goodcitizen.

Q: QuestionI HAVE A 2019 300 AND I HAVE THIS TC-LO2 AND I NEED AN AMP TURN ON BUT ALL OF THE FUSE'S ARE HOT CAN I USE THIS TC-LOC2 TO TURN AMP ON AND OFF

Asked 2 years ago by LEVI.

Q: QuestionI got a by-loc 2 channel converter. It has 4 speaker wires and 2 brown wires for the ground. Ho does it get power.

Asked 2 years ago by Sk00.

Q: QuestionWhere do I connect my rem wire the converter as two brown ground wire

Asked 3 years ago by Jordan.

• A:Answer There is no remote wire

  Answered 3 years ago by BassbabyVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes this converter actually need power, or will it just be better than running it passive? As in, will it work without it?

Asked 3 years ago by JeezyMcNuggles.

• A:Answer Will work without power...but did use ground wires to avoid radio noise

  Answered 3 years ago by PaulVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionHave power to the amp, but I have no sound. I’ve been through all the wires and didn’t find any problems I’ve checked everything that I know It’s a 1 ohm stable amp 4 ohm speaker One kicker comp 12

Asked 3 years ago by Joey.

Q: QuestionCan it be used for video for backup camera? If so how?

Asked 3 years ago by Slizz.

• A:Answer No it only works for a stocked radio if you don't feel like putting a aftermarket radio in

  Answered 3 years ago by Ap91Verified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question